Author Topic: Clutch hub rubbers - need a set? (Read 5005 times)

slikwilli420 · « **on:** February 09, 2017, 05:36:41 AM »

Member Aurelia B20 is setting me up with a set of his clutch hub rubbers and bolts but it costs the same to ship 1-3 units. If anyone needs a set and wants to split shipping, I can send them out to you USPS once I get them and your share of the shipping cost. Let me know and I will coordinate with Aurelia B20.

Here is the info:

http://forums.sohc4.net/index.php?topic=119730.0

http://honda60-70s.net/Pieces/23110-300-030_GB/23110-300-030_gb.html

Medyo Bastos · « **Reply #1 on:** February 09, 2017, 07:11:46 AM »

Add me to the list

Sent from my iPhone using Tapatalk

slikwilli420 · « **Reply #2 on:** February 09, 2017, 07:14:34 AM »

Need one more for the hat trick.

slikwilli420 · « **Reply #3 on:** February 09, 2017, 08:21:06 AM »

MRieck is in for the third set. Thanks all.

dragracer · « **Reply #4 on:** February 09, 2017, 12:41:53 PM »

Room for one more??

PeWe · « **Reply #5 on:** February 09, 2017, 12:56:03 PM »

I sent my clutch hub to Germany for the job. Did it twice, earlier hub and a K6. They replaced the needle bearings too in the last one.
http://www.fourever-classic-parts.de/index.php?option=com_content&view=article&id=26&Itemid=31

This is a must for our old bikes and make them not rattling

slikwilli420 · « **Reply #6 on:** February 09, 2017, 01:04:11 PM »

Quote from: dragracer on February 09, 2017, 12:41:53 PM

Room for one more??

You should email Aurelia B20 and see. As long as it doesnt change the price for the three of us from a shipping standpoint, I don't see the harm. Aurelia B20 quoted same shipping for 1-3 but adding a 4th might not be a big deal but only he will know for sure.

gschuld · « **Reply #7 on:** February 09, 2017, 02:26:04 PM »

I'm in too if there is still room. Maybe two sets.

George.

slikwilli420 · « **Reply #8 on:** February 09, 2017, 03:23:26 PM »

George if you are in for two that would make 3 with dragracer. You guys may be able to get something going on your own or if the seller is fine with it, hitch a ride with the others. It's all a numbers game on international shipping.

dragracer · « **Reply #9 on:** February 10, 2017, 05:01:05 AM »

Quote from: slikwilli420 on February 09, 2017, 03:23:26 PM

George if you are in for two that would make 3 with dragracer. You guys may be able to get something going on your own or if the seller is fine with it, hitch a ride with the others. It's all a numbers game on international shipping.

Thanks for the info. I didn't realize there was a major issue with limiting the quantity due to shipping. I'll get with George.

MRieck · « **Reply #10 on:** February 10, 2017, 05:10:35 AM »

Got an email from Patrick today. He is out of town at an event and will be home Sunday. I will get invoices out then. Just a heads up.

gschuld · « **Reply #11 on:** February 10, 2017, 06:00:29 AM »

Great Mike. I sent him a PM yesterday asking about whether it was more or less convenient for him to send a separate package directly to Frankie (with my 2 sets included)

No big deal either way.

I didn't catch the price per set, anyone know offhand?

George

slikwilli420 · « **Reply #12 on:** February 10, 2017, 06:21:28 AM »

Quote from: gschuld on February 10, 2017, 06:00:29 AM

Great Mike. I sent him a PM yesterday asking about whether it was more or less convenient for him to send a separate package directly to Frankie (with my 2 sets included)

No big deal either way.

I didn't catch the price per set, anyone know offhand?

George

George, with todays conversion rates, you are looking at about $92 plus shipping.

MRieck · « **Reply #13 on:** February 10, 2017, 06:40:23 AM »

I have installed Patrick's kit in 2 primary drives. I know kmb69 has too. Works nice....just follow the directions.

gschuld · « **Reply #14 on:** February 10, 2017, 07:08:56 AM »

Quote from: slikwilli420 on February 10, 2017, 06:21:28 AM

Quote from: gschuld on February 10, 2017, 06:00:29 AM
Great Mike. I sent him a PM yesterday asking about whether it was more or less convenient for him to send a separate package directly to Frankie (with my 2 sets included)

No big deal either way.

I didn't catch the price per set, anyone know offhand?

George

George, with todays conversion rates, you are looking at about $92 plus shipping.

OK, sounds fine. I'm in for two sets. Good to have one "on the shelf".

Thanks for the feedback Mike. I heard they were worth using.

George

gschuld · « **Reply #15 on:** February 11, 2017, 10:27:57 PM »

I have been in contact with Patrick. Slikwilli, MRieck, and Medyo are in for a kit each(I THINK). Unless it creates an issue, between Frankie (dragracer) and I we'll take 3 kits and do ours separately to simplify stuff and get Frankie's set to him as fast as feasible (racing season is coming up FAST)

Patrick is putting our details together now so we can expidite delivery.

George

Medyo Bastos · « **Reply #16 on:** February 12, 2017, 06:37:29 AM »

sounds good to me

Bill/BentON Racing · « **Reply #17 on:** February 12, 2017, 09:13:45 AM »

Yes, racing season is coming up real fast, I have a couple sets, but it's my other parts I need......I know, quality takes time!! It'll all come together somehow, but I need to be ready to race March 25th at Commerce! Gluck to all, Patrick is great to deal with, Bill

MRieck · « **Reply #18 on:** February 12, 2017, 09:26:47 AM »

Quote from: Bill/BentON Racing on February 12, 2017, 09:13:45 AM

Yes, racing season is coming up real fast, I have a couple sets, but it's my other parts I need......I know, quality takes time!! It'll all come together somehow, but I need to be ready to race March 25th at Commerce! Gluck to all, Patrick is great to deal with, Bill

Your big block is leaving tomorrow (as long as I can get to UPS after another snow storm.)

PeWe · « **Reply #19 on:** February 12, 2017, 09:30:23 AM »

Quote from: MRieck on February 12, 2017, 09:26:47 AM

Quote from: Bill/BentON Racing on February 12, 2017, 09:13:45 AM
Yes, racing season is coming up real fast, I have a couple sets, but it's my other parts I need......I know, quality takes time!! It'll all come together somehow, but I need to be ready to race March 25th at Commerce! Gluck to all, Patrick is great to deal with, Bill
Your big block is leaving tomorrow (as long as I can get to UPS after another snow storm.)

OT, but I had to ask..... Billet?

Bill/BentON Racing · « **Reply #20 on:** February 12, 2017, 11:36:14 AM »

Mike, thanks, now about that so called ball game last Sunday......lol. Yes PeWe, it's a JMR Billet Big Block, Nikasil, and JE 72mm 12.5 to 1 big bore kit, going on new Carrillo's and Cycle X crank as long as runout ok. Should be fine. Cam probably a billet Megacycle 125/75 and a Stage IV Mike Rieck cylinder head with beehive springs and 34mm intakes, small stems etc. RS34's Thanks again Mike! Let's go racing,K, Bill

gschuld · « **Reply #21 on:** February 12, 2017, 12:27:40 PM »

Quote from: Bill/BentON Racing on February 12, 2017, 11:36:14 AM

Mike, thanks, now about that so called ball game last Sunday......lol. Yes PeWe, it's a JMR Billet Big Block, Nikasil, and JE 72mm 12.5 to 1 big bore kit, going on new Carrillo's and Cycle X crank as long as runout ok. Should be fine. Cam probably a billet Megacycle 125/75 and a Stage IV Mike Rieck cylinder head with beehive springs and 34mm intakes, small stems etc. RS34's Thanks again Mike! Let's go racing,K, Bill

So in short, a mere "budget motor"

George

MRieck · « **Reply #22 on:** February 12, 2017, 01:03:43 PM »

Quote from: gschuld on February 12, 2017, 12:27:40 PM

Quote from: Bill/BentON Racing on February 12, 2017, 11:36:14 AM
Mike, thanks, now about that so called ball game last Sunday......lol. Yes PeWe, it's a JMR Billet Big Block, Nikasil, and JE 72mm 12.5 to 1 big bore kit, going on new Carrillo's and Cycle X crank as long as runout ok. Should be fine. Cam probably a billet Megacycle 125/75 and a Stage IV Mike Rieck cylinder head with beehive springs and 34mm intakes, small stems etc. RS34's Thanks again Mike! Let's go racing,K, Bill

So in short, a mere "budget motor"

George

George you know you can place a number of more descriptive words in front of the word budget.

I always say a budget is a good start!
Keeping to the thread.....sent my money to Patrick today...get on board ladies.

slikwilli420 · « **Reply #23 on:** February 12, 2017, 01:33:20 PM »

Quote from: MRieck on February 12, 2017, 01:03:43 PM

Quote from: gschuld on February 12, 2017, 12:27:40 PM
Quote from: Bill/BentON Racing on February 12, 2017, 11:36:14 AM
Mike, thanks, now about that so called ball game last Sunday......lol. Yes PeWe, it's a JMR Billet Big Block, Nikasil, and JE 72mm 12.5 to 1 big bore kit, going on new Carrillo's and Cycle X crank as long as runout ok. Should be fine. Cam probably a billet Megacycle 125/75 and a Stage IV Mike Rieck cylinder head with beehive springs and 34mm intakes, small stems etc. RS34's Thanks again Mike! Let's go racing,K, Bill

So in short, a mere "budget motor"

George
George you know you can place a number of more descriptive words in front of the word budget. I always say a budget is a good start!
Keeping to the thread.....sent my money to Patrick today...get on board ladies.

I'm all paid up. Waiting on MB and we are all set.

Medyo Bastos · « **Reply #24 on:** February 12, 2017, 03:55:06 PM »

payment sent

News:

Author Topic: Clutch hub rubbers - need a set? (Read 5005 times)