Author Topic: Wanted a CR rolling chassis ( Beware)  (Read 12185 times)

0 Members and 3 Guests are viewing this topic.

Offline ebarna

  • Full Member
  • *
  • Posts: 16
    • classic cycles
Wanted a CR rolling chassis ( Beware)
« on: February 09, 2017, 06:10:00 PM »
My name is Eddie B. Reason I am posting is I gave Mark Mcgrew with M3 racing a ton of money to build me a rolling chassis 6 plus years ago. He never did build it. He has sent me bit's and pieces. I am building it slowly as the parts trickle in. I will never get all my parts ? He says he is doing all he can. WTF. I dont want someone else to fall into the same trap. This community is not like that. So please beware. 
ejb

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Wanted a CR rolling chassis ( Beware)
« Reply #1 on: February 09, 2017, 06:29:06 PM »
My name is Eddie B. Reason I am posting is I gave Mark Mcgrew with M3 racing a ton of money to build me a rolling chassis 6 plus years ago. He never did build it. He has sent me bit's and pieces. I am building it slowly as the parts trickle in. I will never get all my parts ? He says he is doing all he can. WTF. I dont want someone else to fall into the same trap. This community is not like that. So please beware. 

Yes, unfortunately it is true that Mr. Magoo, alias Mark McGrew of M3 Racing, is an outright lying thief.
Still owes me parts for over 2 4 6 years now even after posting on this forum that he would make it right.  >:(
NEVER DID and probably never will.

Buyer Beware!

Updated. Time flies. Thanks Scottly.
Updated after looking up the old thread. http://forums.sohc4.net/index.php/topic,80346.msg898722.html#msg898722

« Last Edit: February 10, 2017, 08:40:33 PM by kmb69 »

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,268
  • Humboldt, AZ
Re: Wanted a CR rolling chassis ( Beware)
« Reply #2 on: February 09, 2017, 06:40:20 PM »
His last post was 4 years ago, and the last time he logged in as kos was 3 years ago?
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline ebarna

  • Full Member
  • *
  • Posts: 16
    • classic cycles
Re: Wanted a CR rolling chassis ( Beware)
« Reply #3 on: February 09, 2017, 06:48:40 PM »
I am sourcing parts from Daytona 70 ( Daniel ) in France real good guy and he sends me my parts. Another good source is Peter at RSC works motorcycle parts he sends you your parts too. I am to a point where I need to get the bike built but having to buy the parts twice hurts my money does not grow on trees. Anybody else had any dealings with Mark ? Does he ever come through ? It's been almost 7 years ! Good luck my friend.
ejb

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Wanted a CR rolling chassis ( Beware)
« Reply #4 on: February 09, 2017, 07:37:47 PM »

That's incredibly dissapointing.  For those who do not know Ed Barna, he operates Classic Cycles in Vermont.

https://m.facebook.com/168148733205234/photos/a.522076491145788.115969.168148733205234/995789470441152/?type=3&source=44

 He is a regular fixture on the road racing circuit, with USCRA, AHRMA, maybe others.  He has been very open and patient with me while I asked him a million questions about his bike and racing in general at one of the NJMP events in 2015 when I was first looking into building a road racer.  Thanks again BTW...

We need more guys like Ed around, and having him get the short end of the stick sucks.

George
« Last Edit: February 10, 2017, 04:19:32 AM by gschuld »

Offline ebarna

  • Full Member
  • *
  • Posts: 16
    • classic cycles
Re: Wanted a CR rolling chassis ( Beware)
« Reply #5 on: February 10, 2017, 03:15:15 AM »
Thanks for your kind words George. I cant tell you how many sleepless nights I have had over this mess I am in with McGrew. Not to mention my wife Jody who wants to rip his head off. Anyway I guess it's good to vent our frustrations. This is the first time I have openly shared this with anyone. I am out well over 10 grand with this guy I should not have been so trusting. I learned a lesson here! If your out there Mark please make this right. 
ejb

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Wanted a CR rolling chassis ( Beware)
« Reply #6 on: February 10, 2017, 04:28:08 AM »
I did some back n forth with Mark eons ago (20+ years) but only bought a clutch from him. He & his son now travel the country flat tracking. It doesn't appear he has much to do with our 750's anymore.

He stays active on Facebook under his name in case he's not replying through other avenues.

There is no bloody excuse for this, hopefully something changes for you, but as we all know, he never did well by kmb69.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: Wanted a CR rolling chassis ( Beware)
« Reply #7 on: February 10, 2017, 05:20:58 AM »
Really unfortunate. I had some problems too but managed to get the funds back. Eddie....H2Eric is a wealth of CR info too and has worked with Daniel. I am sure he would help you out with logistics.
Owner of the "Million Dollar CB"

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Wanted a CR rolling chassis ( Beware)
« Reply #8 on: February 10, 2017, 08:14:15 AM »
.....
It doesn't appear he has much to do with our 750's anymore.
.....

His thieving reputation finally caught up to him in these circles.  >:(

Online PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,539
  • Bike almost back to the 70's 2015
Re: Wanted a CR rolling chassis ( Beware)
« Reply #9 on: February 10, 2017, 09:27:53 AM »
If someone steal, not deliver....possible to call and report to the local law defenders? Not to Ghost Busters....
There are other Motorcycle guys that has that kind of work to claim money or goods back as their business with a finders fee...., right?

I have a friend that work as a carpenter. He worked for a small company where the owner did not payed him for 2-3 months of work. He talked about it at his next job and a guy there from a famous American motorcycle club (local devision here) asked him if he needed help to get the money back. Just tells us who to talk to...He did not needed that help when the union finally claimed the money for him. My firend was sure hat the case shouldhave  been solved asap with the tough biker.
« Last Edit: February 10, 2017, 09:30:47 AM by PeWe »
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Wanted a CR rolling chassis ( Beware)
« Reply #10 on: February 10, 2017, 03:09:26 PM »

He talked about it at his next job and a guy there from a famous American motorcycle club (local devision here) asked him if he needed help to get the money back. Just tells us who to talk to...


PeeWee,

Your mate was lucky.
A word to the wise. Never go down that road with a patch club.
I can guarantee that cure is far worse than the disease.

And as for mr magoo, well............................what Keith said! ;)
Cheers,
Brian
« Last Edit: February 10, 2017, 03:13:22 PM by bear »
The older I get the faster I was.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Wanted a CR rolling chassis ( Beware)
« Reply #11 on: February 10, 2017, 04:17:15 PM »
Eddie, I've just sent him a message, let's see if he replies, but don't hold your breath mate.

Sam. ;)
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Haybus

  • Enthusiast
  • **
  • Posts: 177
Re: Wanted a CR rolling chassis ( Beware)
« Reply #12 on: February 10, 2017, 07:55:16 PM »
That's a shame. I feel really bad for your situation. I've become so trusting with online purchasing these days I can't fathom never even getting the parts after spending the money. He should take down that website. I hope you get some sort of resolution.

Alan
75 CB750
76 KZ900

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Wanted a CR rolling chassis ( Beware)
« Reply #13 on: February 10, 2017, 08:43:16 PM »
Eddie, I've just sent him a message, let's see if he replies, but don't hold your breath mate.

Sam. ;)

Just got a PM from McGrew (KOS). We'll see.


Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,017
  • I refuse...
Re: Wanted a CR rolling chassis ( Beware)
« Reply #14 on: February 11, 2017, 03:20:43 AM »
Just got a PM from McGrew (KOS). We'll see.
Like its worth anything more today than it was 4 years ago?  ::)
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline ebarna

  • Full Member
  • *
  • Posts: 16
    • classic cycles
Re: Wanted a CR rolling chassis ( Beware)
« Reply #15 on: February 11, 2017, 03:36:18 AM »
I have heard from Mark . He is going to make this work out for me. ( his words). & Will have the cash to order my parts and reimburse me for money spent. I hope and pray that is true. I have got to thank you all for your feedback and your concern. You guys are awesome. This is one of the best forums around if you love Honda CB 750's and making them go fast. I will share some pic's of my build tonight when I get home from work. Cheers Eddie B
ejb

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Wanted a CR rolling chassis ( Beware)
« Reply #16 on: February 11, 2017, 04:05:26 AM »
I have heard from Mark . He is going to make this work out for me. ( his words). & Will have the cash to order my parts and reimburse me for money spent. I hope and pray that is true. I have got to thank you all for your feedback and your concern. You guys are awesome. This is one of the best forums around if you love Honda CB 750's and making them go fast. I will share some pic's of my build tonight when I get home from work. Cheers Eddie B

This is a copy and paste of the reply I got from Mark.

Thank you again. Sam. I messaged each person on the post to clarify their comments, and to see if I could remedy their concerns. Again, Thank you for your concerns.

I hope it works out for you Eddie and Keith, no one likes to be ripped off and it's sad that your problems spilled over onto what is a great forum where we all help each other where we can.

To give you an example of the camaraderie on here take calj737, I had never met him or even exchanged posts with him but when I had my big accident and ended up in hospital for nearly 4 weeks, he visited me regularly, brought me food and then drove me several hundred miles to my mates home in Atlanta, that's what I call a true forum buddy. Thanks again Cal.

I really do hope it works out for all concerned, keep us updated.

Sam.   
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Wanted a CR rolling chassis ( Beware)
« Reply #17 on: February 11, 2017, 05:02:10 AM »
Oh Sam the elder statesman, well done.  8) (I meant elder in the nicest of terms)

Good luck guys, I hope Mark does step up.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,561
  • Big ideas....
Re: Wanted a CR rolling chassis ( Beware)
« Reply #18 on: February 11, 2017, 06:16:43 AM »
I have heard from Mark . He is going to make this work out for me. ( his words). & Will have the cash to order my parts and reimburse me for money spent. I hope and pray that is true. I have got to thank you all for your feedback and your concern. You guys are awesome. This is one of the best forums around if you love Honda CB 750's and making them go fast. I will share some pic's of my build tonight when I get home from work. Cheers Eddie B

This is a copy and paste of the reply I got from Mark.

Thank you again. Sam. I messaged each person on the post to clarify their comments, and to see if I could remedy their concerns. Again, Thank you for your concerns.

I hope it works out for you Eddie and Keith, no one likes to be ripped off and it's sad that your problems spilled over onto what is a great forum where we all help each other where we can.

To give you an example of the camaraderie on here take calj737, I had never met him or even exchanged posts with him but when I had my big accident and ended up in hospital for nearly 4 weeks, he visited me regularly, brought me food and then drove me several hundred miles to my mates home in Atlanta, that's what I call a true forum buddy. Thanks again Cal.

I really do hope it works out for all concerned, keep us updated.

Sam.   
Above and beyond.....well done Cal. If i never got into motorcycles my life would be 75% less than it is. I thank God. ;) ;D
Owner of the "Million Dollar CB"

Offline ebarna

  • Full Member
  • *
  • Posts: 16
    • classic cycles
Re: Wanted a CR rolling chassis ( Beware)
« Reply #19 on: February 21, 2017, 03:20:11 AM »
Still waiting for parts and money. I have got a couple e-mails but still just words.
ejb

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Wanted a CR rolling chassis ( Beware)
« Reply #20 on: February 21, 2017, 04:24:08 AM »
 >:(

George

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,017
  • I refuse...
Re: Wanted a CR rolling chassis ( Beware)
« Reply #21 on: February 21, 2017, 04:44:45 AM »
Still waiting for parts and money. I have got a couple e-mails but still just words.
I guess he doesn't realize "One check is worth a Thousand words..."  >:(
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Online PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,539
  • Bike almost back to the 70's 2015
Re: Wanted a CR rolling chassis ( Beware)
« Reply #22 on: February 22, 2017, 11:52:33 AM »
Why no contact with the law and make sure that the case will be solved?
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Wanted a CR rolling chassis ( Beware)
« Reply #23 on: February 24, 2017, 04:37:25 PM »
Still waiting for parts and money. I have got a couple e-mails but still just words.

Eddie, maybe there's hope. I'm kind of shocked. The mailman just delivered today, the parts I bought from Mark in 2008.

Thank you Sam.

Offline bwaller

  • Really Old Timer ...
  • *******
  • Posts: 7,484
Re: Wanted a CR rolling chassis ( Beware)
« Reply #24 on: February 24, 2017, 05:10:50 PM »
Holy crap, how bout that!  8)

That mean Sam Green put the fear into McGrew.

Hope you fare as well Ed.