« previous next »
Pages: [1]   Go Down

Author Topic: DANG IT!!  (Read 537 times)

0 Members and 1 Guest are viewing this topic.

Offline Desert-SOHC

  • Expert
  • ****
  • Posts: 1,015
  • It's old
DANG IT!!
« on: February 16, 2017, 04:01:13 PM »
I have been having a slight surging issue at high speed so I was clear tubing my PD's and noticed that 1 & 4 were a touch high.  So I pulled the bowl on 1 and one of the bowl screws came out with all the threads.... :o

Mable's now down till I repair/replace #1 carb body, bad day.  >:(

Logged
90 F350 Lariat CS S/C Dually
90 S&S 11SC Cabover Camper
97 FLHTP (under construction)
11 Ranger S/C 2wd

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: DANG IT!!
« Reply #1 on: February 16, 2017, 04:25:33 PM »
Helicoil, or run a longer screw w a nut on top as a temp fix
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,581
  • Dr. Bovinestein iBa#80333
Re: DANG IT!!
« Reply #2 on: February 16, 2017, 04:40:32 PM »
The farmers fix would be a bigger diameter screw and a tap to match.
Logged

Offline Desert-SOHC

  • Expert
  • ****
  • Posts: 1,015
  • It's old
Re: DANG IT!!
« Reply #3 on: February 16, 2017, 07:58:47 PM »
I found a longer screw for now and will probably go up to 5mm and retap.
Logged
90 F350 Lariat CS S/C Dually
90 S&S 11SC Cabover Camper
97 FLHTP (under construction)
11 Ranger S/C 2wd

Offline Imago

  • 1978 CB750F
  • Hot Shot
  • ***
  • Posts: 535
Re: DANG IT!!
« Reply #4 on: February 16, 2017, 08:03:52 PM »
Quote from: Desert-SOHC on February 16, 2017, 07:58:47 PM
I found a longer screw for now and will probably go up to 5mm and retap.
No one will know but you.  ;)
Logged

Offline Desert-SOHC

  • Expert
  • ****
  • Posts: 1,015
  • It's old
Re: DANG IT!!
« Reply #5 on: February 16, 2017, 09:16:15 PM »
I got the rack back on the bike and put gas to them...no leaks, while it's this far apart I'm just going to do a full maintenance on her, plugs, valves, time, and adjustments.
Logged
90 F350 Lariat CS S/C Dually
90 S&S 11SC Cabover Camper
97 FLHTP (under construction)
11 Ranger S/C 2wd
Pages: [1]   Go Up
« previous next »