« previous next »
Pages: [1]   Go Down

Author Topic: Under the seat electric box  (Read 1994 times)

0 Members and 3 Guests are viewing this topic.

Offline jcop550

  • Full Member
  • *
  • Posts: 95
Under the seat electric box
« on: February 22, 2017, 02:25:53 PM »
Hey guys i need some help. I put an electronic tray under my seat and i was wondering what you did with your electricals to make it all fit. I bought a cognito moto deep electrical tray. I was hoping to keep my stock fuse box etc.


Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: Under the seat electric box
« Reply #1 on: February 22, 2017, 02:28:00 PM »
Usually swapping to a solid state Reg/Rec helps. If you want to keep "all" the stock electricals, it will be snug under there. And I mean snug. You'll also need a much smaller battery or to relocate the battery elsewhere.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: Under the seat electric box
« Reply #2 on: February 22, 2017, 03:20:30 PM »
I installed my Rick's R/R on the bottom of my tray, saves space inside, and better cooling there. Using a Li-Ion battery saves a ton of space. There are aftermarket fuse solutions that are more compact than factory.


Sent from my iPhone using Tapatalk
Logged

Offline jcop550

  • Full Member
  • *
  • Posts: 95
Re: Under the seat electric box
« Reply #3 on: February 22, 2017, 03:31:17 PM »
If you guys could send some pictures that would be great. Thanks!


Sent from my iPhone using Tapatalk
Logged

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: Under the seat electric box
« Reply #4 on: February 23, 2017, 03:28:05 AM »



Sent from my iPhone using Tapatalk
Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,040
  • I refuse...
Re: Under the seat electric box
« Reply #5 on: February 23, 2017, 04:20:08 AM »
He's cheating! He's running an M-Unit under there  :o ;D
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: Under the seat electric box
« Reply #6 on: February 23, 2017, 04:35:35 AM »
Here's a two shots of my electrics from couple years ago. This has all the stock wiring in there but with a Rick's reg/rec under the tray. I've got an m-unit now and that really cleans up the mess.


Logged

Offline jcop550

  • Full Member
  • *
  • Posts: 95
Re: Under the seat electric box
« Reply #7 on: February 23, 2017, 04:54:54 AM »
Looks good guys thanks!


Sent from my iPhone using Tapatalk
Logged

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Under the seat electric box
« Reply #8 on: February 23, 2017, 04:58:54 AM »
Jcop550, looking at Dave's pix, you can see some of the fuse holders I was referring to. If you choose soft pvc wire sheaths, it'll save a lot of space over the rigid tubular sheathing Dave used.


Sent from my iPhone using Tapatalk
Logged

Offline jcop550

  • Full Member
  • *
  • Posts: 95
Re: Under the seat electric box
« Reply #9 on: February 23, 2017, 05:01:16 AM »
Quote from: 540nova on February 23, 2017, 04:58:54 AM
Jcop550, looking at Dave's pix, you can see some of the fuse holders I was referring to. If you choose soft pvc wire sheaths, it'll save a lot of space over the rigid tubular sheathing Dave used.


Sent from my iPhone using Tapatalk

Thanks i will do that to free up some space. I was messing with it last night and i think ill be able to fit it all with the reg/rec under the box. Just waiting on my battery to come in so i can see if it works or not.


Sent from my iPhone using Tapatalk
Logged

Offline Jnel

  • Hot Shot
  • ***
  • Posts: 296
Re: Under the seat electric box
« Reply #10 on: February 23, 2017, 05:07:53 AM »
Dave... what did you do for the oil tank? I'm so up in the air about this. 
Logged

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: Under the seat electric box
« Reply #11 on: February 23, 2017, 05:13:52 AM »
Quote from: Jnel on February 23, 2017, 05:07:53 AM
Dave... what did you do for the oil tank? I'm so up in the air about this.

550 has no oil tank :))
Logged

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: Under the seat electric box
« Reply #12 on: February 23, 2017, 05:20:51 AM »
Quote from: 540nova on February 23, 2017, 04:58:54 AM
Jcop550, looking at Dave's pix, you can see some of the fuse holders I was referring to. If you choose soft pvc wire sheaths, it'll save a lot of space over the rigid tubular sheathing Dave used.


Sent from my iPhone using Tapatalk

This may be what Nova is talking about. That split corrugated loom is awful stuff. I ordered a sh*t load of the expandable polyester sleeving from McMaster Carr.

You can see the stuff in my new wiring.
Logged

Offline jcop550

  • Full Member
  • *
  • Posts: 95
Re: Under the seat electric box
« Reply #13 on: February 23, 2017, 05:26:31 AM »
Quote from: DaveBarbier on February 23, 2017, 05:20:51 AM
Quote from: 540nova on February 23, 2017, 04:58:54 AM
Jcop550, looking at Dave's pix, you can see some of the fuse holders I was referring to. If you choose soft pvc wire sheaths, it'll save a lot of space over the rigid tubular sheathing Dave used.


Sent from my iPhone using Tapatalk

This may be what Nova is talking about. That split corrugated loom is awful stuff. I ordered a sh*t load of the expandable polyester sleeving from McMaster Carr.

You can see the stuff in my new wiring.



I have to fit all of that and a battery in a small box. I dont have any extra space unfortunately.





Sent from my iPhone using Tapatalk
Logged

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: Under the seat electric box
« Reply #14 on: February 23, 2017, 05:27:06 AM »
Looks great, Dave!


Sent from my iPhone using Tapatalk
Logged

Offline Jnel

  • Hot Shot
  • ***
  • Posts: 296
Re: Under the seat electric box
« Reply #15 on: February 23, 2017, 05:50:09 AM »

550 no tank.... i see.  Didn't know this.  I wish i could say the same for the 750.  Life would be easier with out it.
Logged

Offline Jnel

  • Hot Shot
  • ***
  • Posts: 296
Re: Under the seat electric box
« Reply #16 on: February 23, 2017, 05:52:09 AM »
This is a great post and is just what im looking for.   Thank you Dave.

Sent from my SAMSUNG-SM-G935A using Tapatalk

Logged

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: Under the seat electric box
« Reply #17 on: February 23, 2017, 05:53:02 AM »
That CM box is so short, I'd make your own, even if it entails removing the horizontal bracing. If you remove the bracing, and weld in a full length box, it would provide more bracing than factory, anyway. That's what I did.


Sent from my iPhone using Tapatalk
Logged

Offline jcop550

  • Full Member
  • *
  • Posts: 95
Re: Under the seat electric box
« Reply #18 on: February 23, 2017, 06:02:40 AM »
Quote from: 540nova on February 23, 2017, 05:53:02 AM
That CM box is so short, I'd make your own, even if it entails removing the horizontal bracing. If you remove the bracing, and weld in a full length box, it would provide more bracing than factory, anyway. That's what I did.


Sent from my iPhone using Tapatalk

Didnt think about removing the brace. Maybe ill try that and rig something new up. Thanks


Sent from my iPhone using Tapatalk
Logged

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 593
Re: Under the seat electric box
« Reply #19 on: February 23, 2017, 06:13:27 AM »
Tie a full length, shallow box into both seat rails, and yo'll increase rigidity in the frame. Win/win.


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »