« previous next »
Pages: [1]   Go Down

Author Topic: Need a picture - 4 in 4 exhaust routing  (Read 372 times)

0 Members and 1 Guest are viewing this topic.

Offline eigenvector

  • Master
  • *****
  • Posts: 1,949
  • Member of the despondent public
Need a picture - 4 in 4 exhaust routing
« on: March 01, 2017, 11:35:00 AM »
I have a favor to ask.  Does anyone have a good shot of the 4 in 4 pipe routing on the left side of a CB550K?

Seems like my sidestand spring is getting in the way of the #1 cylinder pipe.

My bike had a 4 in 1 on it when I bought it and they did quite a bit of mods to the left side.  They drilled the passenger footpeg mount and put a cotter pin through it  ??? - presumably to prevent the bolt from wiggling loose.  So I am not certain there are other mods which might be making this outer pipe not fit properly.
Logged
Rob
--------------------------------
2018 HD Softail Heritage
1979 CB750K Limited Edition
1977 CB550K
1984 CB700SC Nighthawk
1983 VF750S Sabre

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,175
  • ... but some animals are more equal than others.
Re: Need a picture - 4 in 4 exhaust routing
« Reply #1 on: March 01, 2017, 01:27:23 PM »
What brackets do you use?
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Offline eigenvector

  • Master
  • *****
  • Posts: 1,949
  • Member of the despondent public
Re: Need a picture - 4 in 4 exhaust routing
« Reply #2 on: March 01, 2017, 02:04:39 PM »
I don't, I have to manufacture them since the originals were tossed out when the 4 in 1 was put on.

But, if you mean which type - single bracket, both pipes bolt to it.  Appropriate to a '77.
Logged
Rob
--------------------------------
2018 HD Softail Heritage
1979 CB750K Limited Edition
1977 CB550K
1984 CB700SC Nighthawk
1983 VF750S Sabre
Pages: [1]   Go Up
« previous next »