« previous next »
Pages: [1]   Go Down

Author Topic: Balancing Rear Wheel?  (Read 632 times)

0 Members and 1 Guest are viewing this topic.

Offline Sigop

  • Hot Shot
  • ***
  • Posts: 332
Balancing Rear Wheel?
« on: March 09, 2017, 04:49:55 AM »
Balance before replacing sprocket hub and sprocket, or with all parts reassembled?
Or doesn't it matter?
Thanks.  8)
Logged
CB750 K3  Original Owner and Operator

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 589
Re: Balancing Rear Wheel?
« Reply #1 on: March 09, 2017, 05:00:02 AM »
All parts assembled for best results


Sent from my iPhone using Tapatalk
Logged

Offline Sigop

  • Hot Shot
  • ***
  • Posts: 332
Re: Balancing Rear Wheel?
« Reply #2 on: March 10, 2017, 04:25:37 AM »
Thank you.
Logged
CB750 K3  Original Owner and Operator

Offline rotortiller

  • Expert
  • ****
  • Posts: 949
Re: Balancing Rear Wheel?
« Reply #3 on: March 10, 2017, 05:47:07 PM »
Only balance the rotating parts, not everything. The brake plate should left off. Crush drive rubbers and sprocket hub can move. You really need to put the balancer cones on the two  inner wheel bearings. You  can use the axle on knife edges with the sprocket hub in place but you still should remove the brake hub assy.
Logged
Pages: [1]   Go Up
« previous next »