Topic: 1978 CB750 Cafe conversion Front end [re-assembly]

[Rnobx67]

So for now mechanically, I removed the sprocket and release the chain, screws on the cover were seized and try with punch screwdriver and I almost #$%*ed the philips socket, but after putting release all and using a good manual screwdriver I was good.
I've also put the front end in place cause, finally my machinist Can't do me the job, so I send my drawings to other machinists, but I've no chance at all, no quote, not nothing...
Next will  be removed the motor,

What are you using for clean it and repaint it ?

[Rnobx67]

Progress report
unmounting

[Rnobx67]

And some paint applied:

[Rnobx67]

going forward with assemblies, couldnt machined my top trees I've designed, so ended to order one at Cognito (OG). Since I've my daughter, don't work a lot on it, I give it to a shop to assemble it and put in order to work with my new CR Carbs. Soon at home to do the electric part, and custom some other parts.

[Don R]

 It's good to see you back at it.

[Rnobx67]

don't want to give up

[Gurp]

Love a long term project.
Life gets in the way. But it's always good to keep on it even if it's slow progress.

[Rnobx67]

Love a long term project.
Life gets in the way. But it's always good to keep on it even if it's slow progress.

Yes unfortunately don't have much time to put in it, neither a place...

Some back and forth during winter motogadget tiny cup brazed in to the light bucket, then fall down  , small parts as rear pegs done. original pin but put some black plastic washers instead steel one.

[Rnobx67]

bucket

[Rnobx67]

passenger pegs

[Shtonecb500]

bike looks lovely, get a new exhaust, you'll be happier.