« previous next »
Pages: [1]   Go Down

Author Topic: 350F intake manifold  (Read 771 times)

0 Members and 1 Guest are viewing this topic.

Offline excelpowderwerks

  • Full Member
  • *
  • Posts: 2
350F intake manifold
« on: March 13, 2017, 06:35:30 AM »
Ordered new intake manifolds because the the old where rock hard, new ones are only slightly better. My question is there are two distinct manifolds two of each, does anyone know the order these go on in. I have tried six ways to Saturday and they don't seem to line up with the carbs. I have two 16212-333-030 with a small notch on the side and two 16213-333-030 without the notch .  Any help???  Thanks
Logged

Offline excelpowderwerks

  • Full Member
  • *
  • Posts: 2
Re: 350F intake manifold
« Reply #1 on: March 13, 2017, 08:04:54 AM »
I may have this sorted out . The two 16212-333-030 go on the outer cylinders and the 16213-333-030 are inboard. All part numbers on top or facing up.  Anyone??
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 350F intake manifold
« Reply #2 on: March 13, 2017, 02:54:14 PM »
Should be correct.  Inners are the same and outers are the same.
The edges facing/connecting to the carbs should all be flush with each other. 
Hold a straightedge across them all to verify.
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline chrisbc55

  • Full Member
  • *
  • Posts: 69
Re: 350F intake manifold
« Reply #3 on: March 21, 2017, 12:29:30 AM »
Mine had no.s on them.  1 or 4 on the outside ones, 2 or 3.on the inside...if I remember correctly. Place the no.  facing up so they read 1,2 ,3,4 according to cylinders
Logged
Pages: [1]   Go Up
« previous next »