Author Topic: DP295 cam  (Read 4369 times)

0 Members and 1 Guest are viewing this topic.

Offline Ilja

  • Hot Shot
  • ***
  • Posts: 338
Re: DP295 cam
« Reply #25 on: April 09, 2017, 10:29:21 AM »
Nice! Jeah over here in the Netherlands the weather was perfect today! I installed the stock F cam back in and my bike was back to normal.. 😎 hammered it at 15psi for a few hours although my a/f suddenly seemed unstable.. richer down low and leaner at WOT.. I might have a leak in one of the vacuum hoses after all that wrenching. Or the fuel pressure regulator is dying.

And after I put the cb750 away I did another hour on my xr650r sm.. boy thats also fun bike. 😎
« Last Edit: April 09, 2017, 10:31:02 AM by Ilja »

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,540
  • Bike almost back to the 70's 2015
Re: DP295 cam
« Reply #26 on: April 09, 2017, 01:28:34 PM »
Maybe you need one more CB750? For the DP295 ....
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Ilja

  • Hot Shot
  • ***
  • Posts: 338
Re: DP295 cam
« Reply #27 on: April 09, 2017, 02:42:24 PM »
Maybe you need one more CB750? For the DP295 ....

Haha please no more bikes!
Already at 5.5 bikes at the moment. 😰
The cb is done, just fix the speedo and some blinkers... and a set of spoke wheels..and some new paint on the side panels and tank...:)