« previous next »
Pages: [1]   Go Down

Author Topic: RustyOlive's FATTY 550 build.  (Read 2082 times)

0 Members and 2 Guests are viewing this topic.

Offline RustyOlive

  • rustyolive.com
  • Hot Shot
  • ***
  • Posts: 713
RustyOlive's FATTY 550 build.
« on: April 01, 2017, 10:31:00 AM »
Well.. isn't this fun?! Lol

Olivia cb550/650 cafe won April 2017 BOTM (today) and I just picked up a few more goodies for another build (planing stages) I'm doing for my girl. So I figured I should maybe try a build thread on this one too and maybe try to update it more frequentl than Olivia's. Hahaha.

So starting out with 78 CB550 frame, motor and swingarm.
1969 CB350 Super Sport tank metal flaked blue someone did many many years ago. Patina is really sweet. But the inside is really bad. Hopefully I can clean it out good enough for use again.
16" front and rear Harley Davidson drop center rims. Chromed Cb750 hubs to match.

On the hunt for a cheap CBR (non usd) front end or Triumph Bonnivlle.

Plan is to make a fat tire lowered cb550 on 16" 5.00 classic firestones (yes... i know theres lots of haters out there on the firesones.. but my cb750 is still running them and rides great)

I'll try to upload some more detail photos as I go along. For now a good friend helped me render a digital drawing of the bike. Hope this helps clarifies my vision. Lol 
Logged
Untitled by cameron.bateman, on FlickrRustyOlive, on Flickr

Offline RustyOlive

  • rustyolive.com
  • Hot Shot
  • ***
  • Posts: 713
Re: RustyOlive's FATTY 550 build.
« Reply #1 on: April 01, 2017, 10:33:19 AM »
Digi rendering
Logged
Untitled by cameron.bateman, on FlickrRustyOlive, on Flickr

Offline SF

  • Hot Shot
  • ***
  • Posts: 527
  • I burn gas very well
Re: RustyOlive's FATTY 550 build.
« Reply #2 on: April 01, 2017, 10:35:54 AM »
Interested in following along


Sent from my iPhone using Tapatalk
Logged
92 wr250 sold
98 zx6r sold
04 zx10r
73 cb350 twin
75 cb550f
75 cb550f
72 r5c
rgid springer bobber project

Offline RustyOlive

  • rustyolive.com
  • Hot Shot
  • ***
  • Posts: 713
Re: RustyOlive's FATTY 550 build.
« Reply #3 on: April 01, 2017, 10:38:09 AM »
69 cb350 super sport tank.

Love the outside. Just going to clean it up. Reclear it.
Inside however needs a lot of love.
Need to track down new knee pads, emblems, and cap.
Logged
Untitled by cameron.bateman, on FlickrRustyOlive, on Flickr

Offline SF

  • Hot Shot
  • ***
  • Posts: 527
  • I burn gas very well
Re: RustyOlive's FATTY 550 build.
« Reply #4 on: April 01, 2017, 05:46:49 PM »
Looks like someone new what they were doing when they painted that...flake is spread quite well


Sent from my iPhone using Tapatalk
Logged
92 wr250 sold
98 zx6r sold
04 zx10r
73 cb350 twin
75 cb550f
75 cb550f
72 r5c
rgid springer bobber project

Offline palepainter

  • Hot Shot
  • ***
  • Posts: 546
    • Mike Learn custom paint and airbrush.
Re: RustyOlive's FATTY 550 build.
« Reply #5 on: April 01, 2017, 05:50:36 PM »
What drawing program did you use for your rendering.  Nice job.  It really helps when you can assemble your ideas visually.
Logged

Offline riverfever

  • Master
  • *****
  • Posts: 1,796
Re: RustyOlive's FATTY 550 build.
« Reply #6 on: April 01, 2017, 07:03:22 PM »
Really like that flake. Believe that color to be Bass Boat Blue. Used to have a mountain bike painted that color.
Logged
http://forums.sohc4.net/index.php?topic=127186.0

"You wouldn't think that out here...a man could simply run clear...out of country but oh my...oh my...nothing but the light." -Ben Nichols

Offline RustyOlive

  • rustyolive.com
  • Hot Shot
  • ***
  • Posts: 713
Re: RustyOlive's FATTY 550 build.
« Reply #7 on: April 01, 2017, 07:16:43 PM »
Quote from: SF on April 01, 2017, 05:46:49 PM
Looks like someone new what they were doing when they painted that...flake is spread quite well


Sent from my iPhone using Tapatalk

Yeah. Don't look to close.. hahaha. There's some uneven sections. But over all. Its pretty dam cool. Lol
Logged
Untitled by cameron.bateman, on FlickrRustyOlive, on Flickr

Offline RustyOlive

  • rustyolive.com
  • Hot Shot
  • ***
  • Posts: 713
Re: RustyOlive's FATTY 550 build.
« Reply #8 on: April 01, 2017, 07:18:24 PM »
Quote from: palepainter on April 01, 2017, 05:50:36 PM
What drawing program did you use for your rendering.  Nice job.  It really helps when you can assemble your ideas visually.

I actually didn't do the drawing. I gave my "shopping list" and photo of the tank to my buddy who's really talented on that stuff and he did the drawing over a few days.
« Last Edit: April 01, 2017, 07:27:59 PM by RustyOlive »
Logged
Untitled by cameron.bateman, on FlickrRustyOlive, on Flickr

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: RustyOlive's FATTY 550 build.
« Reply #9 on: April 02, 2017, 08:12:39 AM »
I like the tank.  I'm hoping you can rehab it.  Those spots where the paint is cracking on the top with rust below might need some patching/brazing -- let's hope not. 

I'm in to follow this one.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline RustyOlive

  • rustyolive.com
  • Hot Shot
  • ***
  • Posts: 713
Re: RustyOlive's FATTY 550 build.
« Reply #10 on: April 02, 2017, 08:23:57 AM »
Quote from: SOHC4 Cafe Racer Fan on April 02, 2017, 08:12:39 AM
I like the tank.  I'm hoping you can rehab it.  Those spots where the paint is cracking on the top with rust below might need some patching/brazing -- let's hope not. 

I'm in to follow this one.

yeah. agreed. going to break the loose paint chips off and epoxy them back in place. the clear coat should seal it in good. lol. crossing fingers.
Logged
Untitled by cameron.bateman, on FlickrRustyOlive, on Flickr

Offline SF

  • Hot Shot
  • ***
  • Posts: 527
  • I burn gas very well
Re: RustyOlive's FATTY 550 build.
« Reply #11 on: April 02, 2017, 08:35:22 AM »
How are you going to get rust out of the cracks? Dunk the tank in Evoporust?


Sent from my iPhone using Tapatalk
Logged
92 wr250 sold
98 zx6r sold
04 zx10r
73 cb350 twin
75 cb550f
75 cb550f
72 r5c
rgid springer bobber project

Offline SF

  • Hot Shot
  • ***
  • Posts: 527
  • I burn gas very well
Re: RustyOlive's FATTY 550 build.
« Reply #12 on: April 02, 2017, 08:38:29 AM »
I have a heavy orange flake 500 tank I want to rescue


Sent from my iPhone using Tapatalk
Logged
92 wr250 sold
98 zx6r sold
04 zx10r
73 cb350 twin
75 cb550f
75 cb550f
72 r5c
rgid springer bobber project

Offline RustyOlive

  • rustyolive.com
  • Hot Shot
  • ***
  • Posts: 713
Re: RustyOlive's FATTY 550 build.
« Reply #13 on: April 02, 2017, 08:52:01 AM »
Quote from: SF on April 02, 2017, 08:35:22 AM
How are you going to get rust out of the cracks? Dunk the tank in Evoporust?


Sent from my iPhone using Tapatalk

I won't be going crazy at getting the rust off the outer surface. Whatever I can remove with steel-wool before epoxying the paint chips back on I'll be happy with. the inside is going to take more attention. got a buddy thats good at that sorta stuff, I'll probably hand it to him.
took years for mother nature to work her artistry at creating a prefect patina.. be a shame to remove it. LOL
Logged
Untitled by cameron.bateman, on FlickrRustyOlive, on Flickr
Pages: [1]   Go Up
« previous next »