« previous next »
Pages: [1]   Go Down

Author Topic: Vessel JIS screwdrivers,are there other sellers ?  (Read 1738 times)

0 Members and 1 Guest are viewing this topic.

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,294
  • I love to restore & travel. Keep'em Going Strong !
Vessel JIS screwdrivers,are there other sellers ?
« on: April 02, 2017, 10:41:15 AM »
I've been looking for a pr. of Vessel JIS cross-point #P1 & P2(P1-P2 & P3 as a set?) screwdrivers for a friend and have tried reaching Gordon at rrrtool and so far haven't had a return message from him.Do you know of another seller I can buy from for this pr. of screwdrivers for a deal ?

I know a friend who has diabetes and struggles w/ his eyesight and is 'tech. challenged' as far as a computer goes.. so having a contact ph.# would certainly help him to get a set of these.
« Last Edit: April 02, 2017, 10:50:19 AM by grcamna2 »
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 589
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #1 on: April 02, 2017, 10:48:50 AM »
EBay and Amazon


Sent from my iPhone using Tapatalk
Logged

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,112
  • Sunny Central Florida
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #2 on: April 02, 2017, 12:06:59 PM »
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,294
  • I love to restore & travel. Keep'em Going Strong !
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #3 on: April 02, 2017, 12:25:09 PM »
Quote from: madmtnmotors on April 02, 2017, 12:06:59 PM
http://www.vesseltools.com/hand-tools/screwdrivers/screwdriver-sets/900/kit-p123/flypage.tpl.html

Am I reading that right? a 3-piece set for $29 ? I'll call them tomorrow to confirm this but this looks like a great deal !
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,112
  • Sunny Central Florida
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #4 on: April 02, 2017, 12:32:20 PM »
Quote from: grcamna2 on April 02, 2017, 12:25:09 PM
Quote from: madmtnmotors on April 02, 2017, 12:06:59 PM
http://www.vesseltools.com/hand-tools/screwdrivers/screwdriver-sets/900/kit-p123/flypage.tpl.html

Am I reading that right? a 3-piece set for $29 ? I'll call them tomorrow to confirm this but this looks like a great deal !

Yep. It's where I got mine. They even have JIS replacement bits for a standard impact driver too (highly recommended):

http://www.vesseltools.com/hand-tools/screwdrivers/impact/431801/flypage.tpl.html
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline b52bombardier1

  • Hot Shot
  • ***
  • Posts: 536
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #5 on: April 02, 2017, 02:53:40 PM »
McMaster Carr also sells that set of three Vessel drivers but for more dollars.

Rick
Logged
1971 School Bus Yellow Aermacchi H-D Sprint 350
1972 Candy Yellow CL100 K2
1972 Candy Jet Green Honda CB500
1973 Mighty Green ST90 K0
1974 Mars Orange CT90 K5
1975 Topaz Orange ST90 K2
1976 Shiny Orange CT90
2006 Honda Foreman 500 (restored)

Offline 540nova

  • Hot Shot
  • ***
  • Posts: 589
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #6 on: April 02, 2017, 04:26:31 PM »
I highly endorse JIS screwdrivers, but a standard #3 Apex bit works well, particularly in an impact handle.


Sent from my iPhone using Tapatalk
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #7 on: April 04, 2017, 06:40:09 AM »
For $14, this is great for a travel tool pouch.  I got one and its very well made.

https://www.amazon.com/gp/product/B00E55DL4I/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,481
  • Central Texas
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #8 on: April 04, 2017, 07:29:21 AM »
Quote from: grcamna2 on April 02, 2017, 12:25:09 PM
Quote from: madmtnmotors on April 02, 2017, 12:06:59 PM
http://www.vesseltools.com/hand-tools/screwdrivers/screwdriver-sets/900/kit-p123/flypage.tpl.html

Am I reading that right? a 3-piece set for $29 ? I'll call them tomorrow to confirm this but this looks like a great deal !

Good deal but shipping is $17.51  [to Texas]
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,050
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #9 on: April 04, 2017, 09:17:41 AM »
Lucky you dont live in Canada,   it would be 10.00more, plus we still got snow everywhere on the hills.
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Darren Jakal

  • Hot Shot
  • ***
  • Posts: 395
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #10 on: April 04, 2017, 05:48:36 PM »
http://www.gofastinnovations.com/

$25 cdn pesos for the Canucks out there, or $35 US for the Americans. Shipping included.

cheers, dj
Logged

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,294
  • I love to restore & travel. Keep'em Going Strong !
Re: Vessel JIS screwdrivers,are there other sellers ?
« Reply #11 on: April 04, 2017, 06:11:02 PM »
Quote from: Darren Jakal on April 04, 2017, 05:48:36 PM
http://www.gofastinnovations.com/

$25 cdn pesos for the Canucks out there, or $35 US for the Americans. Shipping included.

cheers, dj

Similar to Vessel,they look ok.
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.
Pages: [1]   Go Up
« previous next »