« previous next »
Pages: [1]   Go Down

Author Topic: I want black spokes!  (Read 1358 times)

0 Members and 1 Guest are viewing this topic.

Offline ryangpierce

  • Full Member
  • *
  • Posts: 1
I want black spokes!
« on: April 11, 2017, 07:03:52 AM »
I'm a complete noob who's tackling a '77 CB550K café build. I'm planning a complete tear-down/rebuild. Here's the thing, I really want black spokes/rims/hubs with chrome nipples. I'm not finding any source for black spokes, and I've seen lots of advice on how NOT to color spokes but very little on the best way to do it. Advice?
Logged

Offline Davez134

  • Expert
  • ****
  • Posts: 1,485
Re: I want black spokes!
« Reply #1 on: April 12, 2017, 08:49:49 PM »
I've had mine powder coated with good results.
Logged

Offline evinrude7

  • not a kung-fu
  • Master
  • *****
  • Posts: 2,099
  • something to hüsker
Re: I want black spokes!
« Reply #2 on: April 12, 2017, 09:16:22 PM »
flex seal?
Logged
cb750 k6 - ugly

Offline iFart

  • Full Member
  • *
  • Posts: 77
Re: I want black spokes!
« Reply #3 on: April 12, 2017, 10:06:39 PM »
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,860
  • Saver of unloved motorcycles.
Re: I want black spokes!
« Reply #4 on: April 12, 2017, 11:14:59 PM »
Me too.

Someone said you can spray that stuff inside the rim and go tubeless! I wouldn't but you can.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,020
  • I refuse...
Re: I want black spokes!
« Reply #5 on: April 13, 2017, 04:44:22 AM »
You can use Duplicolor "Black Chrome" paint on stock chromed steel spokes. It will produce a decent, slightly translucent blacked chrome appearance. If you do this, wrap each spoke in tape during install to avoid scratching them up to bits. Once the wheel is installed fully, remove the tape.

And do this to your spokes with them hanging and free from the rim.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline evinrude7

  • not a kung-fu
  • Master
  • *****
  • Posts: 2,099
  • something to hüsker
Re: I want black spokes!
« Reply #6 on: April 13, 2017, 07:35:11 AM »
ryan, the flex seal just popped into my head.  i'm a noob too.  hope you don't mind some good hearted ribbing.  i've thought of painting my rusted spokes as well.  come to think of it flex seal might be just the ticket for mine.  if i do i'm rocking a phil swift sticker right on the side of my tank. 
Logged
cb750 k6 - ugly

Offline iFart

  • Full Member
  • *
  • Posts: 77
Re: I want black spokes!
« Reply #7 on: April 13, 2017, 07:38:22 AM »
Truck bed liner could be cool. I thought about doing that on a tank.

Phil Swift and not Taylor?! Ugh, I can't even...
Logged

Offline Geeto67

  • A grumpy
  • Old Timer
  • ******
  • Posts: 2,823
Re: I want black spokes!
« Reply #8 on: April 13, 2017, 08:38:57 AM »
I bought a couple bags of SpokeCoats for cheap from a shop that was getting rid of them on clearance (I think I paid $3 a bag). They are a color sleeve that goes over the spokes, mostly for MX bikes.  I cut them to fit my ducati and they popped right on. Best part is if I get bored with the color or want to go back to original spokes they just pop off.
Logged
Maintenance Matters Most

Offline Lostboy Steve

  • Old Timer
  • ******
  • Posts: 3,096
Re: I want black spokes!
« Reply #9 on: April 13, 2017, 09:28:21 AM »
Quote from: Davez134 on April 12, 2017, 08:49:49 PM
I've had mine powder coated with good results.

I powdercoated my own because my powdercoater was too much of a pussy to do it. "It's a lot of tedious work". Yeah, no #$%*. My hands hurt just thinking about the blasting process of all those pieces. They came out great and look wonderful.


Sent from my iPhone using Tapatalk
Logged
1968 Honda Z50
1977 Honda CB550K
2018 Indian Scout

Offline wowbagger

  • Not much of an
  • Expert
  • ****
  • Posts: 853
Re: I want black spokes!
« Reply #10 on: April 13, 2017, 02:06:23 PM »
I powder coated my original ones and they came out great. If I had it to do over, I wouldn't powder the nipples. They got pretty scuffed up during the truing and torquing.




Here's the build thread link:
http://forums.sohc4.net/index.php/topic,152837

Hmm.............I should really get back to finishing that bike
Logged

Offline Lostboy Steve

  • Old Timer
  • ******
  • Posts: 3,096
Re: I want black spokes!
« Reply #11 on: April 13, 2017, 05:51:03 PM »
Quote from: wowbagger on April 13, 2017, 02:06:23 PM
I powder coated my original ones and they came out great. If I had it to do over, I wouldn't powder the nipples. They got pretty scuffed up during the truing and torquing.




Here's the build thread link:
http://forums.sohc4.net/index.php/topic,152837

Hmm.............I should really get back to finishing that bike
Yeah I agree 100% mine aren't perfect after truing either.

Sent from my LG-V520 using Tapatalk

Logged
1968 Honda Z50
1977 Honda CB550K
2018 Indian Scout

Offline palepainter

  • Hot Shot
  • ***
  • Posts: 546
    • Mike Learn custom paint and airbrush.
Re: I want black spokes!
« Reply #12 on: April 13, 2017, 08:09:15 PM »
How much of threads would you guys advise to tape off before powdercoating?  Probably wouldn't be so noticeable if you had un coated nipples, in regards to thread showing.
Logged

Offline wowbagger

  • Not much of an
  • Expert
  • ****
  • Posts: 853
Re: I want black spokes!
« Reply #13 on: April 14, 2017, 04:05:46 AM »
Tape off all of the threads. There's no way of knowing how much you'll need on each.


Sent from my iPhone using Tapatalk
Logged
Pages: [1]   Go Up
« previous next »