« previous next »
Pages: [1]   Go Down

Author Topic: Engine Shop near NH  (Read 945 times)

0 Members and 1 Guest are viewing this topic.

Offline FJ40toy

  • Full Member
  • *
  • Posts: 33
Engine Shop near NH
« on: April 11, 2017, 02:53:44 PM »
Hey Folks,

I have been trying to find a shop in my area that can bore my cylinders and knows enough about the CB750 to rebuild my head. I have an automotive machine shop I have used in the past, but they are not familiar with the CBs. Do any of you know of a reputable shop in the New England area that you could recommend? I don't mind driving a few hours one way to get the job done right. Any help would be much appreciated.

Sent from my XT1650 using Tapatalk

Logged
1978 CB750F, 1973 XL250 Motosport, 1982 FT500 Ascot(engine rebuild), 2000 VTR1000F Superhawk, 1974 CB550 (waiting for rebuild)

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: Engine Shop near NH
« Reply #1 on: April 11, 2017, 03:27:59 PM »
PM member MRieck. He's south of you in MA and does boring, porting, etc. Exceptional work and has done my motor and many other members' motors as well. And he's nice too!
Logged

Offline GV1390

  • Hot Shot
  • ***
  • Posts: 586
  • Express Gratitude.
Re: Engine Shop near NH
« Reply #2 on: April 11, 2017, 04:01:27 PM »
Quote from: DaveBarbier on April 11, 2017, 03:27:59 PM
PM member MRieck. He's south of you in MA and does boring, porting, etc. Exceptional work and has done my motor and many other members' motors as well. And he's nice too!

+1

Mike has done work for me as well, he's not only a SOHC wizard but also a gentleman with some humor.

:P
Logged
93' GSX-R1100, 78' CB550, 71' CL350, 71’ CB500 & 02' ZRX1200R.

Offline FJ40toy

  • Full Member
  • *
  • Posts: 33
Re: Engine Shop near NH
« Reply #3 on: April 11, 2017, 07:01:49 PM »
Thanks guys! I just PMed MRieck.
Logged
1978 CB750F, 1973 XL250 Motosport, 1982 FT500 Ascot(engine rebuild), 2000 VTR1000F Superhawk, 1974 CB550 (waiting for rebuild)

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,598
  • Big ideas....
Re: Engine Shop near NH
« Reply #4 on: April 11, 2017, 07:12:44 PM »
Quote from: FJ40toy on April 11, 2017, 07:01:49 PM
Thanks guys! I just PMed MRieck.
Got it. I can help you out.
Logged
Owner of the "Million Dollar CB"

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,598
  • Big ideas....
Re: Engine Shop near NH
« Reply #5 on: April 11, 2017, 07:13:31 PM »
Quote from: GV1390 on April 11, 2017, 04:01:27 PM
Quote from: DaveBarbier on April 11, 2017, 03:27:59 PM
PM member MRieck. He's south of you in MA and does boring, porting, etc. Exceptional work and has done my motor and many other members' motors as well. And he's nice too!

+1

Mike has done work for me as well, he's not only a SOHC wizard but also a gentleman with some humor.

:P
Thank you for that too! ;)
Logged
Owner of the "Million Dollar CB"

Offline rupaulpierce

  • Hot Shot
  • ***
  • Posts: 297
Re: Engine Shop near NH
« Reply #6 on: April 11, 2017, 07:18:22 PM »
Nova cycles in turners falls mass


Sent from my iPhone using Tapatalk
Logged

Offline rupaulpierce

  • Hot Shot
  • ***
  • Posts: 297
Re: Engine Shop near NH
« Reply #7 on: April 11, 2017, 07:21:34 PM »
Or MRieck, sorry didn't read the whole thread didn't mean to blow up your spot!


Sent from my iPhone using Tapatalk
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,598
  • Big ideas....
Re: Engine Shop near NH
« Reply #8 on: April 12, 2017, 03:54:30 AM »
Quote from: rupaulpierce on April 11, 2017, 07:21:34 PM
Or MRieck, sorry didn't read the whole thread didn't mean to blow up your spot!


Sent from my iPhone using Tapatalk
No worries  ;)
Logged
Owner of the "Million Dollar CB"
Pages: [1]   Go Up
« previous next »