« previous next »
Pages: [1]   Go Down

Author Topic: Chain Question  (Read 772 times)

0 Members and 1 Guest are viewing this topic.

Offline 1978CB750SS

  • Enthusiast
  • **
  • Posts: 133
  • https://www.youtube.com/watch?v=TV5u5V6SJFw#t=253.
Chain Question
« on: April 15, 2017, 04:55:39 PM »
Not sure what to order to fit these sprockets. I had a chain that came with the bike all rolled up uninstalled. I put the front sprocket on today the P O gave me with the bike.
The teeth are way to big and far apart for the chain to sit in the teeth. The front sprocket has the number 14 on it. What do I order to get the proper chain for these sprockets?
I don't know crap about chain and sprocket combos. Always ran what was on the bike. Any help is appreciated.

Logged

Offline antleo

  • Full Member
  • *
  • Posts: 59
Re: Chain Question
« Reply #1 on: April 15, 2017, 05:03:25 PM »
My guess would be a 530. Get a 120 link 530 chain, and you'll have to shorten it. It's an easy process. Grind down a pin and punch it out

Sent from my SM-G930T using Tapatalk

Logged

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,106
  • Sunny Central Florida
Re: Chain Question
« Reply #2 on: April 15, 2017, 05:08:31 PM »
Quote from: antleo on April 15, 2017, 05:03:25 PM
My guess would be a 530. Get a 120 link 530 chain, and you'll have to shorten it. It's an easy process. Grind down a pin and punch it out

Sent from my SM-G930T using Tapatalk



Later models used a 630 chain. Looks like you are trying to put a 530 chain on 630 sprockets. Any numbers on the side plates of the chain?
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline 1978CB750SS

  • Enthusiast
  • **
  • Posts: 133
  • https://www.youtube.com/watch?v=TV5u5V6SJFw#t=253.
Re: Chain Question
« Reply #3 on: April 15, 2017, 05:55:14 PM »
Quote from: madmtnmotors on April 15, 2017, 05:08:31 PM
Quote from: antleo on April 15, 2017, 05:03:25 PM
My guess would be a 530. Get a 120 link 530 chain, and you'll have to shorten it. It's an easy process. Grind down a pin and punch it out

Sent from my SM-G930T using Tapatalk



Later models used a 630 chain. Looks like you are trying to put a 530 chain on 630 sprockets. Any numbers on the side plates of the chain?

Thanks guys. I'll check the chain in 3 days and read up on this stuff. I just got cleaned up. haha Got to be up at 4:20 a.m.
Plus got to be clean for bed. My boss says so. hahaha I been wearing the plastic gloves usually but didn't today.
 Back is sore, nails are toast, broken, greasy and hurting! Still,It was a good day. lol
Logged
Pages: [1]   Go Up
« previous next »