« previous next »
Pages: 1 ... 3 4 [5] 6 7 ... 68   Go Down

Author Topic: Terry Bob's redneck F-ing K2 bitsa project!  (Read 187254 times)

0 Members and 3 Guests are viewing this topic.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,733
  • SOHC/4 Member #1235
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #100 on: June 30, 2017, 08:13:05 AM »
I'm going to give it a shot.  I probably won't go through all of my threads to replace ALL of my photo links though. 
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #101 on: June 30, 2017, 08:13:34 AM »
Here is my sissy bar with my red backpack for visibility. I put my camera in there, some baby wipes, a locking cable for my helmet, ear plugs, an extra clip. If I don't bring the camera I have some room for small items. I can use the bungees to tie things to the front.
« Last Edit: June 30, 2017, 08:15:14 AM by BobbyR »
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline ofreen

  • Old Timer
  • ******
  • Posts: 4,053
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #102 on: June 30, 2017, 09:17:28 AM »
Quote from: RAF122S on June 30, 2017, 06:09:07 AM
Photobucket is holding everyone hostage that uses them and posts files from them as a source unless they give them $69 to upgrade their account to allow that feature.

It will take $399 a year -

http://forums.sohc4.net/index.php/topic,166817.msg1929543.html#msg1929543
Logged
Greg
'75 CB750F

"I would rather have questions I cannot answer than answers I cannot question." - Dr. Wei-Hock Soon

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,212
  • I love to restore & travel. Keep'em Going Strong !
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #103 on: June 30, 2017, 10:35:14 AM »
Well 'Terry Bob' Ya'll outa host your Own photo 'deal' for us here sohc4 types  ??? :D
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,339
  • So, what do ya wanna talk about today?
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #104 on: June 30, 2017, 07:20:22 PM »
Thanks guys, thanks to Steve, I've uploaded a lot of recent pics to flickr, but I'm about to jump in my big red truck and drive up to my Redneck home town in the hills to share some "Roadkill pie and grits" with my mammy and other kin today, so I'll have to replace all my beautiful pics on this thread later.

My mate Fred rang to say he's found me a battery box and a swingarm, so I'll collect them tomorrow. I don't need the swinger now that I've got that nice one coming, but a "bird in the hand", and all that. More tomorrow. ;D

Hillary by Terry Prendergast, on Flickr   
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #105 on: June 30, 2017, 07:43:49 PM »
Quote from: Terry in Australia on June 30, 2017, 07:20:22 PM
Thanks guys, thanks to Steve, I've uploaded a lot of recent pics to flickr, but I'm about to jump in my big red truck and drive up to my Redneck home town in the hills to share some "Roadkill pie and grits" with my mammy and other kin today, so I'll have to replace all my beautiful pics on this thread later.

Hot damn son. You nailed it! Slick as Possum #$%* in the rain.   
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,212
  • I love to restore & travel. Keep'em Going Strong !
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #106 on: June 30, 2017, 09:17:38 PM »
Lol  :D   ;D
« Last Edit: July 01, 2017, 08:26:49 AM by grcamna2 »
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,339
  • So, what do ya wanna talk about today?
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #107 on: July 01, 2017, 05:19:59 AM »
Quote from: BobbyR on June 30, 2017, 08:13:34 AM
Here is my sissy bar with my red backpack for visibility. I put my camera in there, some baby wipes, a locking cable for my helmet, ear plugs, an extra clip. If I don't bring the camera I have some room for small items. I can use the bungees to tie things to the front.

Yep that looks good Bobby, mine is just a sissybar, (no rack) but it's got the pad on it too. Once I clean off several years of dirt and fly poop, it should look half decent. ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #108 on: July 01, 2017, 08:04:00 AM »
Half decent is ideal!
Logged
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #109 on: July 01, 2017, 08:19:59 AM »
subscribed
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,212
  • I love to restore & travel. Keep'em Going Strong !
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #110 on: July 01, 2017, 08:21:18 AM »
Quote from: Terry in Australia on June 27, 2017, 02:55:00 PM
Wow! When I first saw that guy I thought I was looking into a mirror! I can't play the vid as I'm surrounded by public servants with no collective sense of humour, so I'll have to wait until I get home, and I'll watch it while cleaning my guns.... ;D

Terry,
Was wondering if you might be distantly related to that little redneck cousin?  ::) ;D
I bet when you first watched that guy you LMFAO so hard you were 'blowing chunks'  :D
« Last Edit: July 01, 2017, 08:23:26 AM by grcamna2 »
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,339
  • So, what do ya wanna talk about today?
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #111 on: July 01, 2017, 09:10:40 AM »
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,339
  • So, what do ya wanna talk about today?
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #112 on: July 01, 2017, 09:16:31 AM »
Quote from: grcamna2 on July 01, 2017, 08:21:18 AM
Quote from: Terry in Australia on June 27, 2017, 02:55:00 PM
Wow! When I first saw that guy I thought I was looking into a mirror! I can't play the vid as I'm surrounded by public servants with no collective sense of humour, so I'll have to wait until I get home, and I'll watch it while cleaning my guns.... ;D

Terry,
Was wondering if you might be distantly related to that little redneck cousin?  ::) ;D
I bet when you first watched that guy you LMFAO so hard you were 'blowing chunks'  :D

Ha ha, I wish my dad was still alive mate, he had the weakest stomach of any man I've ever known. I reckon if I showed him that vid he would have "blown chunks" in sympathy. I've got a much stronger constitution, borne from 38 years of eating Army grub....... ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,212
  • I love to restore & travel. Keep'em Going Strong !
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #113 on: July 01, 2017, 10:37:56 AM »
Quote from: BobbyR on June 30, 2017, 08:13:34 AM
Here is my sissy bar with my red backpack for visibility. I put my camera in there, some baby wipes, a locking cable for my helmet, ear plugs, an extra clip. If I don't bring the camera I have some room for small items. I can use the bungees to tie things to the front.

Bobby,I hope you're not running your bike on 100 octane from that ancient pump..  :o  :D
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,593
  • Gusto mo titi ko?
    • project
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #114 on: July 01, 2017, 11:14:56 AM »
Looks like you carry a parachute as well bobby.


Sent from my iPhone using Tapatalk
Logged

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,339
  • So, what do ya wanna talk about today?
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #115 on: July 02, 2017, 02:13:23 AM »
Well I woke up this morning, (a great start for a blues song, although I'm more of a "Hayseed Dixie" fan) and it was fcuking freezing! We had the coldest overnight temps recorded in 30 years in my home town, according to the thermometer in my big red truck, it was -3 deg C. No, that's not peeling clearcoat, that's fcuking ice!

Frozen Territory 02 Jul 2017 by Terry Prendergast, on Flickr 

Anyway, I drove the 200 miles home from my Ma's place, arrived home around midday, took a dump, made a cup of coffee then got stuck into the old widowmaker. I'd dropped into my mate Fred's place on the drive up to Ma's, and scored the swingarm, battery box and best of all, the "threaded both ends" footpeg rod, which Fred even had re-zinc plated. What a great bloke!

Fred's parts by Terry Prendergast, on Flickr

Anyhoo, the moment had finally come to marry the engine to the frame. I tipped the engine over on it's side, and laid the frame over the engine, and I was surprised at how simple it went. I used the same method on the bike I built for Mike a few years ago, but from memory, it was much harder then, or maybe it was much easier this time, whatever, I got the engine in the frame without fcuking my back, squashing my fingers or chipping any paint, so I'm one happy Redneck!

Engine instal by Terry Prendergast, on Flickr

While I had the engine on it's side, I decided to replace the alternator cover. This one has had a repair but otherwise it's fine, and certainly usable, but I had my heart set on a set of magnificent finned covers I've had gathering dust in my garage for awhile.

Engine instal 6 by Terry Prendergast, on Flickr

Like everything else on this engine, every screw came out without any problems, I'm sure you'll all be proud of me when I say the original gasket looked so good, I recycled it! 

Engine instal 2 by Terry Prendergast, on Flickr

I did have one buggared screw on the finned cover, but I managed to drill the head off without any problems, and I had the finned cover on with no issues.

Engine instal 3 by Terry Prendergast, on Flickr

Engine instal 5 by Terry Prendergast, on Flickr

Engine instal 8 by Terry Prendergast, on Flickr

So that's about the long and the short of it, the engine is bolted into the frame, so all going well, I'll have the front and rear suspension fitted, then I'll have to start thinking about wheels and tyres. I'm getting excited! Cheers, Terry. ;D

Engine instal 7 by Terry Prendergast, on Flickr

Engine instal 10 by Terry Prendergast, on Flickr



 
« Last Edit: July 02, 2017, 02:23:39 AM by Terry in Australia »
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline MoMo

  • Really Old Timer ...
  • *******
  • Posts: 8,275
  • Ride like you're invisible
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #116 on: July 02, 2017, 04:47:30 AM »
"I woke up this morning with no way to turn my head that didn't hurt, so I had a beer for breakfast and another for desert".  fitting lyrics for Terry Bob.
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,400
  • Central Texas
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #117 on: July 02, 2017, 07:37:18 AM »
"Little bit of ice never hurt no one" -  that could be your next song, Uncle Terry!

I could use some ice in my cocktail as it's gonna be a hot one over here in TX.

I see your using Flickr with no issues...
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,928
  • Bought her new 4/75
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #118 on: July 02, 2017, 08:25:24 AM »
How about "Whiskey meltin tha iice"
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline grcamna2

  • Not a
  • Really Old Timer ...
  • *******
  • Posts: 15,212
  • I love to restore & travel. Keep'em Going Strong !
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #119 on: July 02, 2017, 08:52:39 AM »
Terry Bob,
The engine is lookin' gouod being married to the frame like thait;I noticed yee gud'er to lie down fer you right away.Did you en' Ma hold you a shot gun weddin' so is to make sure she wouldna' be a leavin you none too soon?
Terr Bob, You saide yous was drilling out 'a' buggared screw,that's all fine n' good main,but why'd you haive to drill SO many holes into yer engiine?!  ???  isn' thait so you can shoot some earl onto the chain right quick whilst your ridin' ??  We All will need to start calling you a 'holy man' 
 just don't fergit to hiyde thait drill from yerself in case iffin you haive a weaird dream and start a' sleep walkin' toward yer sweet bike..  ???

Nice to see those good parts you found Terry Bob,gittin'um PC'd is the waey to go main
« Last Edit: July 02, 2017, 01:12:50 PM by grcamna2 »
Logged
75' CB400F/'bunch o' parts' & 81' CB125S modded to a 'CB200S'
  I love the small ones too !
Do your BEST...nobody can take that away from you.

Online PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,653
  • Bike almost back to the 70's 2015
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #120 on: July 02, 2017, 11:12:05 AM »
Hi Terry-Bob!

I met a guy from Melbourne last week in Santorini Greece, he talked about snow. Is that really possible?
Greece however got the heat a few days ago 35-40*C and winds from Sahara made me feel to stand too close to an open oven. Riding a bike there will be hotter by the speed. We returned home to 20-22*C in time. I've missed my bike too ;) D)

Freezing car windows is common here. I have an electrical heater permanently installed in my car, connected each morning from October to April. It has an oil pan heater device too as many other at latitude 60 degrees north.
« Last Edit: July 02, 2017, 11:13:38 AM by PeWe »
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,112
  • Sunny Central Florida
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #121 on: July 02, 2017, 01:46:52 PM »
I'm with ya on the Hayseed Dixie...  8)
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,339
  • So, what do ya wanna talk about today?
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #122 on: July 02, 2017, 01:56:39 PM »
Hey thanks guys, when I get time I'll restore all those pics that photobucket deleted with the ones I've uploaded to Flickr, (thanks again Steve) but hopefully my swingarm will arrive before the weekend, and I'll have to search thru all my parts for some new bushings to install before it goes on.

I had a restless night last night, (not caused by the Bundaberg rum I enjoyed so much, I'm sure) but more from some mental gymnastics, designing in my head, a flexible baffle that I can push/pull into the 4 into 2 "turnout" exhaust I'll be installing. I really hate it when my brain won't switch off, so it'll be a long day in the office today.

Anyway, this coffee is going down a treat, and I might see if I can't rustle up some bacon and some beans for a nice musical breakfast! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,339
  • So, what do ya wanna talk about today?
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #123 on: July 02, 2017, 01:59:09 PM »
Hell yeah Wilbur, I saw them live many years ago, their AC/DC stuff was fantastic, and I don't think even Bon Scott could drink as much as their lead singer! ;D
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline BPellerine

  • Master
  • *****
  • Posts: 2,222
Re: Terry Bob's redneck F-ing K2 bitsa project!
« Reply #124 on: July 02, 2017, 03:22:34 PM »
soon time to bungee cord the seat on and get some braided grips with nice long tassles to beat your arms off,along with a NRA sticker or two,haha .bill
Logged
1978 CB 750K ard and webers
another anfob
Pages: 1 ... 3 4 [5] 6 7 ... 68   Go Up
« previous next »