« previous next »
Pages: 1 2 3 [4] 5 6   Go Down

Author Topic: 1978 CB550... I tried to keep it stock, I failed.  (Read 23620 times)

0 Members and 2 Guests are viewing this topic.

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #75 on: August 28, 2017, 02:07:21 PM »
Looking good, B.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #76 on: August 28, 2017, 03:02:52 PM »
Thanks, Don!

Does anyone have a bare 77-78 CB550 seat pan they are willing to get rid of? I need to chop one up for a shorter seat
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #77 on: August 28, 2017, 05:16:33 PM »
Are you aiming to keep the stock functionality of the hinges and just shorten the overall seat?  So much for stock!!  :o
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #78 on: August 29, 2017, 12:01:34 PM »
Quote from: calj737 on August 28, 2017, 05:04:04 PM
Quote from: BLAC on August 28, 2017, 03:02:52 PM
Does anyone have a bare 77-78 CB550 seat pan they are willing to get rid of? I need to chop one up for a shorter seat
Just make one from aluminum you lazy, Bastage!  ::)

Your overestimate of my skillset is flattering  :P
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline Camrector

  • Hot Shot
  • ***
  • Posts: 579
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #79 on: August 29, 2017, 12:09:48 PM »
Looking so good!
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #80 on: August 29, 2017, 12:26:16 PM »
I want to be adopted by his girlfriend's grandfather -- or at least get to use his sweet garage!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #81 on: August 29, 2017, 01:21:54 PM »
Quote from: calj737 on August 29, 2017, 12:54:00 PM
Quote from: BLAC on August 29, 2017, 12:01:34 PM
Quote from: calj737 on August 28, 2017, 05:04:04 PM
Quote from: BLAC on August 28, 2017, 03:02:52 PM
Does anyone have a bare 77-78 CB550 seat pan they are willing to get rid of? I need to chop one up for a shorter seat
Just make one from aluminum you lazy, Bastage!  ::)

Your overestimate of my skillset is flattering  :P
Take a 1/8" sheet of aluminum. Trace the hoop/rails. Cut with a jig saw. Propane torch to heat it, bend it to fit curvature. Dress edges with grinder and flap disk or files. Locate hinges. Done yet????  ::)

Aaaaaand I'm headed to the "Wanted" section to create a post... ;D
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline Restoration Fan

  • My wife will never call me
  • Master
  • *****
  • Posts: 1,956
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #82 on: August 30, 2017, 08:59:20 AM »
cal is an absolute master of the understatement, isn't he?  :D
Logged
Ron

Stella - Logan's Senior Project    78 750K http://forums.sohc4.net/index.php?topic=141761.0

Logan's Reward - CB500 and CB550 Cafes    http://forums.sohc4.net/index.php/topic,147787.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #83 on: August 30, 2017, 10:52:38 AM »
Im not afraid to try, but I know someone who made tens of thousands of them already... Honda  :P

I also want it to be steel so I can weld onto it. I need to incorporate a brake light into the seat somehow  :o
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #84 on: September 01, 2017, 11:31:54 AM »
Might be a stupid question, but I can not find any reference to which engine mounting points are the grounds (unpainted).

Is it just the back two that make direct contact with the frame?   ???

« Last Edit: September 01, 2017, 01:27:44 PM by BLAC »
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #85 on: September 01, 2017, 05:23:36 PM »
Is there a downside to having more than just that one ground point?

For some reason I thought it was the bottom rear two as well, so I have all three of hose unpainted...
« Last Edit: September 01, 2017, 05:28:35 PM by BLAC »
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #86 on: September 18, 2017, 11:51:02 AM »
I got the whole motor reassembled and put in the 650 cam.. but then I realized I forgot to put in the two hollow dowels that go between the cylinder and the head... The step by step I was looking at didnt use them and I didnt notice them until I was cleaning up my bench.

son of a BETCH.

ok... so I used a brand new OEM base gasket and head gasket, with permatex copper spray in both. I also used hondabond on the new pucks, so it is sealed up nice.  My question is...

Do I need to run those dowels? If not necesary should I just leave it as is since everything is sprayed and torqued?  If I do have to run them, can I reuse my brand new head gasket?

this is a bummer  :-\

Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline NobleHops

  • Don ya be callin' me no
  • Expert
  • ****
  • Posts: 1,340
  • Misfit - Tucson, Arizona
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #87 on: September 18, 2017, 12:16:41 PM »
Quote from: BLAC on September 18, 2017, 11:51:02 AM
I got the whole motor reassembled and put in the 650 cam.. but then I realized I forgot to put in the two hollow dowels that go between the cylinder and the head... The step by step I was looking at didnt use them and I didnt notice them until I was cleaning up my bench.

son of a BETCH.

ok... so I used a brand new OEM base gasket and head gasket, with permatex copper spray in both. I also used hondabond on the new pucks, so it is sealed up nice.  My question is...

Do I need to run those dowels? If not necesary should I just leave it as is since everything is sprayed and torqued?  If I do have to run them, can I reuse my brand new head gasket?

this is a bummer  :-\




Bryan, I don't have a qualified answer on the dowel pins so I won't opine, but I will say, 'been there, done that' in similar fashion, and whether or not they speak up, I bet a dozen ore more guys that read this are saying it too. Re your head gasket, if it is MLS I personally think the answer is no on reuse, and yes if it is copper. Paper gasket, unknown, but if it isn't damaged when you pop the top off, I am going to GUESS that reuse is fine.

N.

 
Logged
Nils Menten * Tucson, Arizona, USA

I have a motorcycle problem.

My build thread: NobleHops makes a 400F pretty for his wife: http://forums.sohc4.net/index.php?topic=131210.0

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #88 on: September 18, 2017, 12:20:54 PM »
Quote from: NobleHops on September 18, 2017, 12:16:41 PM
Quote from: BLAC on September 18, 2017, 11:51:02 AM
I got the whole motor reassembled and put in the 650 cam.. but then I realized I forgot to put in the two hollow dowels that go between the cylinder and the head... The step by step I was looking at didnt use them and I didnt notice them until I was cleaning up my bench.

son of a BETCH.

ok... so I used a brand new OEM base gasket and head gasket, with permatex copper spray in both. I also used hondabond on the new pucks, so it is sealed up nice.  My question is...

Do I need to run those dowels? If not necesary should I just leave it as is since everything is sprayed and torqued?  If I do have to run them, can I reuse my brand new head gasket?

this is a bummer  :-\




Bryan, I don't have a qualified answer on the dowel pins so I won't opine, but I will say, 'been there, done that' in similar fashion, and whether or not they speak up, I bet a dozen ore more guys that read this are saying it too. Re your head gasket, if it is MLS I personally think the answer is no on reuse, and yes if it is copper. Paper gasket, unknown, but if it isn't damaged when you pop the top off, I am going to GUESS that reuse is fine.

N.

Thanks!I actually was watching the soco videos and actually found him on this forum and someone else said "hey I built my motor watching your video but I dont think you used the alignment dowels between the cylinder and the head" he responded with "im not sure what you are referring to' then the thread died  ::)

 I used the stock OEM gasket that is the waxy/graphite looking thing. Im not sure what it is made from. its not the aftermarket MLS though
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #89 on: September 18, 2017, 12:33:32 PM »
Quote from: calj737 on September 18, 2017, 12:31:57 PM
Best answered by Mike R (in my opinion)

Agreed, I sent him a text a minute ago. I hope I get good news
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #90 on: September 18, 2017, 01:15:38 PM »
in happier news. im really liking how its coming together!





I did some custom work to the front fender. It looked way to big compared to the shortened rear fender so I chopped it up and rewelded it back together so I could keep the lips on the front and the back.




I also just got Hagons installed. I actually bought these new, sold them to Eric, then ended up needing another set so I called him up and he was about to pull them off his bike so I bought them back from him  :P

Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Online SKTP

  • Master
  • *****
  • Posts: 1,798
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #91 on: September 18, 2017, 02:53:56 PM »
This thing is going to be awesome!
Logged
1978k rebuild thread http://forums.sohc4.net/index.php?topic=68423.0
BIKE OF THE MONTH - OCTOBER 2017
2003 Ducati M800ie
1997 Honda CR-V
2004 Honda CR-V
1966 Honda S90

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #92 on: September 18, 2017, 08:08:23 PM »
Looking sweet Bryan.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Camrector

  • Hot Shot
  • ***
  • Posts: 579
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #93 on: September 18, 2017, 08:28:46 PM »
Looking great!!
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,474
  • Central Texas
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #94 on: September 19, 2017, 07:07:18 AM »
Nice!
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline BLAC

  • An espresso is a
  • Hot Shot
  • ***
  • Posts: 691
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #95 on: September 19, 2017, 10:02:28 AM »
I got word back from Mrieck... I need to pull her all apart  >:(

Off to Dallas for the rest of the week for business, it's well timed because I'm not emotionally ready to take that motor apart again  ;D
Logged
If you can't fix it with a hammer, it's an electrical problem... If it's an electrical problem, it's Cal's problem.

*2005 Yamaha R6 (sold)
*2014 Ducati Streetfighter 848 (sold)
*2014 BMW S1000RR (sold)
*2010 Ducati Streetfighter S
*1978 CB550 Restomod Build
*1974 CB550 Monoshock build
http://forums.sohc4.net/index.php/topic,154614.0.html

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #96 on: September 19, 2017, 11:32:21 AM »
Quote from: BLAC on September 19, 2017, 10:02:28 AM
I got word back from Mrieck... I need to pull her all apart  >:(

Off to Dallas for the rest of the week for business, it's well timed because I'm not emotionally ready to take that motor apart again  ;D

That, and you've had your "hands full" with a feisty red Italian mistress.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Camrector

  • Hot Shot
  • ***
  • Posts: 579
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #97 on: September 20, 2017, 08:05:01 AM »
We in da Club! I got us VIP.  ;D ;D
Logged

Offline markreimer

  • Expert
  • ****
  • Posts: 1,192
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #98 on: September 20, 2017, 10:00:43 AM »
Bryan, if ya any consolation I just built a 350f motor and after putting it all together I realized my pistons were facing backwards. Had to re do it all, with new gaskets. It happens. Just be glad you caught it now instead of potential damage at start up. Bike looks aaaaawesome by the way!


Sent from my iPhone using Tapatalk
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,556
  • SOHC/4 Member #1235
Re: 1978 CB550... I tried to keep it stock, I failed.
« Reply #99 on: September 20, 2017, 12:13:00 PM »
Don't forget the fetzer valve, too! 
Not to mock your misfortune Bryan.  It sucks that you have to crack it open again.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold
Pages: 1 2 3 [4] 5 6   Go Up
« previous next »