« previous next »
Pages: [1]   Go Down

Author Topic: Recommendations needed: brat hoop and seat for 750k  (Read 1548 times)

0 Members and 2 Guests are viewing this topic.

Offline JBCB500

  • Enthusiast
  • **
  • Posts: 216
  • Really enjoying this!
Recommendations needed: brat hoop and seat for 750k
« on: May 17, 2017, 08:28:34 PM »
Not long ago I posted on this forum a request for a brat seat that did not require mods to the frame, however now I'm more committed to the brat idea and I'm willing to cut the rear of the frame and install a hoop.  But I'd still rather install a pre-made brat style seat without the need to fabricate a pan, foam, upholster, etc.

Any recommendations on a hoop and compatible seat? Preferably brown and willing to use vinyl and other fake leathers to keep cost down.

Thanks!
Logged

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #1 on: May 17, 2017, 08:46:18 PM »
Are you limiting rear suspension travel so it won't hit the seat undersides?
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline JBCB500

  • Enthusiast
  • **
  • Posts: 216
  • Really enjoying this!
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #2 on: May 17, 2017, 09:16:07 PM »
Quote from: TwoTired on May 17, 2017, 08:46:18 PM
Are you limiting rear suspension travel so it won't hit the seat undersides?

I was hoping I wouldn't have to.  Aren't some loops upturned for this reason?

Looking for something like the one in this pic
Logged

Offline tylerdb

  • Full Member
  • *
  • Posts: 44
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #3 on: May 17, 2017, 09:46:26 PM »
With stock length shocks and a seat hoop - even with an upturn unless you turn up immediately after the shock mounts - the tire will hit the bottom of the seat pan under full compression most likely.

Remove the spring from your shocks and see how much clearance you need to the hoop.I had to install 1" longer shocks on my bike when i added a hoop.

FWIW i found it better to weld the hoop where i wanted it and make my own seat pan. Then i took it to a local guy to upholster. You get a much nicer seat if you do it that way imo.
Logged
Saskatchewan, Canada

Offline JBCB500

  • Enthusiast
  • **
  • Posts: 216
  • Really enjoying this!
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #4 on: May 18, 2017, 07:13:01 AM »
Thanks Tyler.  I'll certainly consider rubbing issues when I go ahead with this.

I'm really just hoping not to have to mess about with fabbing my own pan.  Surely with such a large aftermarket for these bikes there is a simple way to achieve a look similar to the one in my photo above?

I have seen the dime city cycles one but the seat doesn't look very substantial.  It looks very narrow, sitting between the frame rails and not on top of them.
Logged

Offline JBCB500

  • Enthusiast
  • **
  • Posts: 216
  • Really enjoying this!
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #5 on: May 18, 2017, 07:16:33 AM »
Anyone got one of these?:  https://www.ebay.com/p/?iid=172597344290&&&chn=ps

Is is a simple case of cut the frame, install the hoop, and drill holes for the bolts I see underneath the seat?

This has the look I'm interested in and seems to turn up enough to avoid contact at the rear.
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #6 on: May 18, 2017, 07:28:46 AM »
A member here makes them.  Forgot who tho  :-\
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,281
  • Central Texas
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #7 on: May 18, 2017, 07:43:52 AM »
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #8 on: May 18, 2017, 07:51:05 AM »
There it is  ;D
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline JBCB500

  • Enthusiast
  • **
  • Posts: 216
  • Really enjoying this!
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #9 on: May 18, 2017, 07:36:16 PM »
Bump - hoping for some first hand experience
Logged

Offline JBCB500

  • Enthusiast
  • **
  • Posts: 216
  • Really enjoying this!
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #10 on: May 22, 2017, 10:00:32 AM »
Really not a single 750 owner with a brat seat?

I thought this site was full of them
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #11 on: May 22, 2017, 10:03:54 AM »
I cant think of any member other than the Architect with one.  They cant be very comfortable  :-\
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #12 on: May 22, 2017, 10:07:02 AM »
Quote from: JBCB500 on May 22, 2017, 10:00:32 AM
Really not a single 750 owner with a brat seat?

I thought this site was full of them

There may have been.  But, I think the flippers sold them off and moved on to cutting up different bikes.

Just a guess, mind you.

 ;D
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline schu3507

  • Full Member
  • *
  • Posts: 51
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #13 on: May 25, 2017, 01:55:07 PM »
I just ordered this one. Not so much a brat seat but low profile. This one will actually fit over the frame rails but the rear fender bump has to be removed. Got from Texavina.
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #14 on: May 25, 2017, 02:02:53 PM »
Quote from: schu3507 on May 25, 2017, 01:55:07 PM
I just ordered this one. Not so much a brat seat but low profile. This one will actually fit over the frame rails but the rear fender bump has to be removed. Got from Texavina.
Good ole' Vietnam  ;D
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline schu3507

  • Full Member
  • *
  • Posts: 51
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #15 on: May 25, 2017, 03:01:25 PM »
I hear ya brother...looked around a bit. Threw in towel 😕  I'm shamed
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #16 on: May 25, 2017, 04:50:26 PM »
Quote from: schu3507 on May 25, 2017, 01:55:07 PM
I just ordered this one. Not so much a brat seat but low profile. This one will actually fit over the frame rails but the rear fender bump has to be removed. Got from Texavina.

I'd prefer the low-profile seat to the brat-style (not very comfortable at all).
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline seanbarney41

  • not really that much younger than an
  • Really Old Timer ...
  • *******
  • Posts: 10,810
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #17 on: May 25, 2017, 06:20:03 PM »
Quote from: JBCB500 on May 22, 2017, 10:00:32 AM
Really not a single 750 owner with a brat seat?

I thought this site was full of them
the brats I have ridden...well, they sucked.  Why anyone would want to pay money and do work to make their bike suck is beyond me.  I suggest turning off the internet and go ride some good motorcycles.
« Last Edit: May 25, 2017, 10:18:40 PM by seanbarney41 »
Logged
If it works good, it looks good...

Offline harisuluv

  • Master
  • *****
  • Posts: 2,009
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #18 on: May 25, 2017, 06:26:43 PM »
Yeah that's my ebay listing.  I can also make them in diamond stitch or real leather.  I also make them with an extra layer of foam compared to normal so it's a little more confortable (as pictured).

I'll also give members free shipping.
Logged

Offline schu3507

  • Full Member
  • *
  • Posts: 51
Re: Recommendations needed: brat hoop and seat for 750k
« Reply #19 on: May 25, 2017, 07:26:46 PM »
I agree wt the brat seat being ass uncomfortable (personally) Kinda like folks running club man bars and no rear sets. I couldn't do it personally...if it works for someone cool but looking cool only goes so far. Enjoying the ride will kee ya soul happy. Kinda like drag bars and forwarded controls...looks good for 10 miles.
Logged
Pages: [1]   Go Up
« previous next »