« previous next »
Pages: [1]   Go Down

Author Topic: 1973 CB 500 oil drip at shifter  (Read 1020 times)

0 Members and 1 Guest are viewing this topic.

Offline docoffey

  • Full Member
  • *
  • Posts: 61
1973 CB 500 oil drip at shifter
« on: May 22, 2017, 08:45:47 AM »
It's been a couple of years and 3000 mile since I finished restoring and it has dripped oil out the shifter the whole time, especially while hot. Had 8000 miles on it then, now has 11400. Looks like an old harley has been sitting there. It doesn't drip enough to require adding oil, just enough to leave sign. After it cools down it stops dripping. I've taken the side off a couple of times but can't see why it drips.
Ideas??  thanks!
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: 1973 CB 500 oil drip at shifter
« Reply #1 on: May 22, 2017, 09:01:54 AM »
Pull out and replace the seal #5
 91202-216-000

Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline docoffey

  • Full Member
  • *
  • Posts: 61
Re: 1973 CB 500 oil drip at shifter
« Reply #2 on: May 22, 2017, 09:29:05 AM »
Okay, I'll give that a shot. Thanks.
Logged

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,121
  • ... but some animals are more equal than others.
Re: 1973 CB 500 oil drip at shifter
« Reply #3 on: May 22, 2017, 11:12:03 AM »
Or do like me and use Castrol GTX High Mileage 15W-40. Stopped leaking at the shifter seal.
« Last Edit: May 22, 2017, 11:30:59 AM by Deltarider »
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Offline Pan1cReaper

  • Enthusiast
  • **
  • Posts: 112
Re: 1973 CB 500 oil drip at shifter
« Reply #4 on: May 23, 2017, 05:38:07 PM »
That seal is like 4 bucks and pretty easy to replace. Worth doing it, thats for sure.
Logged

Offline carnivorous chicken

  • Master
  • *****
  • Posts: 1,842
Re: 1973 CB 500 oil drip at shifter
« Reply #5 on: May 23, 2017, 06:55:15 PM »
And verify that there isn't an o-ring chain that's too wide. Not sure about the 500s, but the 550s have a seal that the an oversize chain will rub and create a leak.
Logged

Offline Mooshie

  • Expert
  • ****
  • Posts: 1,037
Re: 1973 CB 500 oil drip at shifter
« Reply #6 on: May 23, 2017, 07:39:59 PM »
Quote from: flybox1 on May 22, 2017, 09:01:54 AM
Pull out and replace the seal #5
 91202-216-000



+1. Sounds like the beginnings of a shifter seal breakdown.  It will only get worse.  Replace.  Super simple to do
Logged
1976 CB550F
Standard disclaimer: Remember I am just a girl--so be nice fellows!

Offline docoffey

  • Full Member
  • *
  • Posts: 61
Re: 1973 CB 500 oil drip at shifter
« Reply #7 on: May 26, 2017, 07:11:41 AM »
Okay, I have a new seal from 4into1.  What's the trick for removing the old seal???
Logged

Offline docoffey

  • Full Member
  • *
  • Posts: 61
Re: 1973 CB 500 oil drip at shifter
« Reply #8 on: May 26, 2017, 07:55:02 AM »
Never mind, I did get it off with a scribe and the new one is a different size!! crap.
Logged
Pages: [1]   Go Up
« previous next »