« previous next »
Pages: [1]   Go Down

Author Topic: Cr750 Keeps striping starter ring  (Read 734 times)

0 Members and 1 Guest are viewing this topic.

Offline 70sBeaver

  • Full Member
  • *
  • Posts: 4
Cr750 Keeps striping starter ring
« on: May 23, 2017, 11:05:40 AM »
I have a CR750 and it has stripped the teeth off the starter ring three times, it has been correctly fitted and checked for alignment
, any ideas what it could be?
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Cr750 Keeps striping starter ring
« Reply #1 on: May 23, 2017, 11:32:38 AM »
 Check that the intermediate gear is the right pitch, AND diameter..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Online scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,343
  • Humboldt, AZ
Re: Cr750 Keeps striping starter ring
« Reply #2 on: May 23, 2017, 06:05:04 PM »
Do you mean the large gear concentric to and behind the alternator rotor? A member had an intermediate gear break some teeth off a while back, which was caused by a very worn starter bushing at the pinion end of the starter.
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....
Pages: [1]   Go Up
« previous next »