Author Topic: My dream bike. (Read 10713 times)

scunny · « **Reply #25 on:** April 19, 2020, 05:11:46 PM »

Where did you get the brackets for the Tarozzi rearsets ?
lookin good bye the way.

TjTalan · « **Reply #26 on:** April 19, 2020, 06:41:18 PM »

Quote from: scunny on April 19, 2020, 05:11:46 PM

Where did you get the brackets for the Tarozzi rearsets ?
lookin good bye the way.

Thank you.

The brackets are from Cofnito Moto

https://cognitomoto.com/products/cb750-billet-aluminum-rearset-brackets

Sent from my iPhone using Tapatalk

Stev-o · « **Reply #27 on:** April 20, 2020, 06:18:41 AM »

Welcome back and 2.5 years! Good to see you back at it. Have you started wiring yet?

70CB750 · « **Reply #28 on:** April 20, 2020, 06:44:38 AM »

Following.

RAZZ · « **Reply #29 on:** April 20, 2020, 06:56:17 AM »

Quote from: 70CB750 on April 20, 2020, 06:44:38 AM

Following.

+1

Sent from my iPhone using Tapatalk

MauiK3 · « **Reply #30 on:** April 20, 2020, 09:30:48 AM »

Keep going!!
We all want to see.

TjTalan · « **Reply #31 on:** April 20, 2020, 10:31:08 AM »

Quote from: Stev-o on April 20, 2020, 06:18:41 AM

Welcome back and 2.5 years! Good to see you back at it. Have you started wiring yet?

Thanks for the welcome. Basically all of my original parts from the wreck walked off when I moved, including the harness. So I’m starting from scratch. I have all Motogadget goodies, all the wire I need, and weatherpack connectors. So just a really simple custom harness.

I’ve wired a lot of vehicles in my day, I actually love doing it. To answer your question, I have not technically started yet lol.

Sent from my iPhone using Tapatalk

TjTalan · « **Reply #32 on:** April 20, 2020, 10:33:11 AM »

Quote from: MauiK3 on April 20, 2020, 09:30:48 AM

Keep going!!
We all want to see.

Quote from: RAZZ on April 20, 2020, 06:56:17 AM

Quote from: 70CB750 on April 20, 2020, 06:44:38 AM
Following.
+1

Sent from my iPhone using Tapatalk

Quote from: 70CB750 on April 20, 2020, 06:44:38 AM

Following.

Thanks guys, should be a good ride, If I can stay focused haha!

Sent from my iPhone using Tapatalk

jakec · « **Reply #33 on:** April 20, 2020, 12:46:26 PM »

You should document how you mount up the fairing. not enough pics online of how to do that with out of the box parts.

TjTalan · « **Reply #34 on:** April 20, 2020, 12:57:30 PM »

Quote from: jakec on April 20, 2020, 12:46:26 PM

You should document how you mount up the fairing. not enough pics online of how to do that with out of the box parts.

I will definitely be thorough, However I believe the kit to be complete. Including the frame for mounting. I expect just minor modifications. I ordered mine without a headlight opening, and matte finish.

https://www.omegaracer.com/parts_store

Sent from my iPhone using Tapatalk

jakec · « **Reply #35 on:** April 20, 2020, 02:37:29 PM »

looks really cool, and they show it on a 400 <3

TjTalan · « **Reply #36 on:** April 20, 2020, 02:45:15 PM »

Yeah I kind of fell in love. Really the finishing touch on my bike I think. Two versions available, small and a large. I obviously got the larger of the two.

Sent from my iPhone using Tapatalk

BenelliSEI · « **Reply #37 on:** April 20, 2020, 04:49:35 PM »

TJ...... first time visit. Very cool build. Stay on it!

TjTalan · « **Reply #38 on:** April 20, 2020, 05:18:34 PM »

Quote from: BenelliSEI on April 20, 2020, 04:49:35 PM

TJ...... first time visit. Very cool build. Stay on it!

Thank you, you have a response by the way.

Sent from my iPhone using Tapatalk

SOHC4 Cafe Racer Fan · « **Reply #39 on:** April 21, 2020, 01:27:33 PM »

If you've never used the motogadget button switches, you may "try" out with gloved hands. I've heard more than a few people complain about their small size and feel (you don't want to have to fumble around for a button or have to look down). Motone makes larger switches as to a few other vendors -- if you think they are too small.

TjTalan · « **Reply #40 on:** April 21, 2020, 02:09:14 PM »

Quote from: SOHC4 Cafe Racer Fan on April 21, 2020, 01:27:33 PM

If you've never used the motogadget button switches, you may "try" out with gloved hands. I've heard more than a few people complain about their small size and feel (you don't want to have to fumble around for a button or have to look down). Motone makes larger switches as to a few other vendors -- if you think they are too small.

The input is always appreciated. I really never gave that much thought. Ive never used them, I’ll put a glove on later and have a feel.

Sent from my iPhone using Tapatalk

Godffery · « **Reply #41 on:** April 21, 2020, 03:05:48 PM »

Holly Smokies...!
It's good to see your still at it, or Back at it !!!

TjTalan · « **Reply #42 on:** April 21, 2020, 03:45:13 PM »

Well thanks to BenelliSEI, I have a proper race oil tank, and cooler kit from his Rickman project. The cap location should line up with my seat perfectly! I’m trying to figure out shipping for his engine, I want it!

Canada to Los Angeles, expensive!

Sent from my iPhone using Tapatalk

Godffery · « **Reply #43 on:** April 21, 2020, 05:45:22 PM »

Quote from: TjTalan on April 21, 2020, 02:09:14 PM

Quote from: SOHC4 Cafe Racer Fan on April 21, 2020, 01:27:33 PM
If you've never used the motogadget button switches, you may "try" out with gloved hands. I've heard more than a few people complain about their small size and feel (you don't want to have to fumble around for a button or have to look down). Motone makes larger switches as to a few other vendors -- if you think they are too small.
The input is always appreciated. I really never gave that much thought. Ive never used them, I’ll put a glove on later and have a feel.

Sent from my iPhone using Tapatalk

I'll second that...
About a year ago I built a bike for a customer, and he chose those same Motogadget switches. They were "ok" bare handed but not so much with even thin gloves.

BenelliSEI · « **Reply #44 on:** April 22, 2020, 01:40:55 PM »

TJ..... tank posted today. Email sent with details.

TjTalan · « **Reply #45 on:** April 22, 2020, 03:42:11 PM »

Quote from: BenelliSEI on April 22, 2020, 01:40:55 PM

TJ..... tank posted today. Email sent with details.

Thank you, Can’t wait!

Sent from my iPhone using Tapatalk

CBJoe · « **Reply #46 on:** April 22, 2020, 04:08:35 PM »

Quote from: Godffery on April 21, 2020, 05:45:22 PM

Quote from: TjTalan on April 21, 2020, 02:09:14 PM
Quote from: SOHC4 Cafe Racer Fan on April 21, 2020, 01:27:33 PM
If you've never used the motogadget button switches, you may "try" out with gloved hands. I've heard more than a few people complain about their small size and feel (you don't want to have to fumble around for a button or have to look down). Motone makes larger switches as to a few other vendors -- if you think they are too small.
The input is always appreciated. I really never gave that much thought. Ive never used them, I’ll put a glove on later and have a feel.

Sent from my iPhone using Tapatalk
I'll second that...
About a year ago I built a bike for a customer, and he chose those same Motogadget switches. They were "ok" bare handed but not so much with even thin gloves.

Cool Build! you may look at member Messnermoto's switches....I dont have any issue using them with leather gloves.

https://messnermoto.com/product/motorcycle-switches/

TjTalan · « **Reply #47 on:** April 22, 2020, 05:22:12 PM »

After taking the advice of the members above, I mounted the switch. I then pulled out my thickest gauntlet leather glove. Like most things on a motorcycle, it comes down to personal feel, and taste. For me, these are perfect. I can feel the contours through the glove, and actuate the switch perfectly!

Some pics.

Sent from my iPhone using Tapatalk

CBJoe · « **Reply #48 on:** April 23, 2020, 07:29:01 AM »

Looks good...nice and clean

TjTalan · « **Reply #49 on:** April 23, 2020, 10:09:35 AM »

Quote from: CBJoe on April 23, 2020, 07:29:01 AM

Looks good...nice and clean

Thanks Joe.

Sent from my iPhone using Tapatalk

News:

Author Topic: My dream bike. (Read 10713 times)