Started the mock up of the bike. keeping the front faring as is, including the square headlight. Slight modification to the tail and might remove the rear passenger pegs / exhaust hangers for a more modern approach with aluminum hangers.

Steering stem swapped on the 900ss front forks, this was easier than I expected using a little heat and my press.

Rebuilt the new to me 900ss rear shock and have been cleaning all the other 17 inch swap parts.

Carbs have been ultrasonic cleaned and in the process of rebuild.

Once the mock up is completed I will tear everything down and send the parts out to my powdercoater. This weekend I hope to get the new belts installed on the engine, new clutch and do a valve adjust to button up the engine.