« previous next »
Pages: [1]   Go Down

Author Topic: Tool Steel Wrist Pins  (Read 2793 times)

0 Members and 1 Guest are viewing this topic.

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Tool Steel Wrist Pins
« on: July 26, 2017, 02:18:28 PM »
People were bemoaning a few months ago that we were no longer making 15mm tool steel wrist pins. The market just didn't support it. 

Well we just received rods and pistons from Racer Machine for the RC Sorcerer. They need pins.  So here's a heads up. We are making a short run of them along with the batch of Harley® top fuel pins we are currently running.

THere will be several sets left over. They will be sold on a first come, first serve basis.   Get to the phone ASAP.
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Tool Steel Wrist Pins
« Reply #1 on: July 26, 2017, 03:31:05 PM »
Just ordered 4 sets.... ;D
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Tool Steel Wrist Pins
« Reply #2 on: July 26, 2017, 03:43:12 PM »
Interesting.  How do these compare weight wise to "regular" big bore 15mm pins?

Are wrist pins with teflon buttons as a package available?

George
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Tool Steel Wrist Pins
« Reply #3 on: July 26, 2017, 03:45:19 PM »
How much per set ?
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Tool Steel Wrist Pins
« Reply #4 on: July 26, 2017, 04:11:53 PM »
Quote from: 754 on July 26, 2017, 03:45:19 PM
How much per set ?

Big Jays list sets of 4 for his regular 16mm and up sets for $89.  Not sure if the small run dictates a bigger price.

George
Logged

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Tool Steel Wrist Pins
« Reply #5 on: July 26, 2017, 05:52:57 PM »
How do these compare to other quality aftermarket wrist pins for high performance poisons for our bikes? Weight? Strength?
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Tool Steel Wrist Pins
« Reply #6 on: July 26, 2017, 07:25:31 PM »
Quote from: slikwilli420 on July 26, 2017, 05:52:57 PM
How do these compare to other quality aftermarket wrist pins for high performance poisons for our bikes? Weight? Strength?
Well, when they break, it's like poison! Lol. Who makes a 15mm aftermarket strong pin?
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,102
  • CB750F Dragbike
Re: Tool Steel Wrist Pins
« Reply #7 on: July 26, 2017, 07:37:38 PM »
I'm in for two sets to fit 72mm bore if you read this before tomorrow Jaye. I'll call to confirm with you in the morning. I need 3 sets of telfon buttons too.
Logged

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Tool Steel Wrist Pins
« Reply #8 on: July 26, 2017, 08:24:27 PM »
I'm in for a set of 73mm and 70mm bore 15mm diameter pin sets with buttons if you can supply them.  Perhaps 71s too.

I'll call in the morning as well.

George
Logged

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Tool Steel Wrist Pins
« Reply #9 on: July 26, 2017, 09:17:23 PM »
Our fueler pins are not about weight.  They are about opening the throttle on the Sorcerer and not have a rod poking thru the cases.
Logged

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Tool Steel Wrist Pins
« Reply #10 on: July 26, 2017, 09:46:30 PM »
Quote from: Big Jay on July 26, 2017, 09:17:23 PM
Our fueler pins are not about weight.  They are about opening the throttle on the Sorcerer and not have a rod poking thru the cases.

Oh I totally understand.  Nitro has a habit of shredding engine parts. ;)  The Sorcerer should get the strongest available pins.

The important question(for me anyway) is whether you can supply pin/teflon (or aluminum) button combos for us in 70-73mm bore.

George

Logged

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Tool Steel Wrist Pins
« Reply #11 on: July 27, 2017, 04:22:51 AM »
Quote from: Bill/BentON Racing on July 26, 2017, 07:25:31 PM
Quote from: slikwilli420 on July 26, 2017, 05:52:57 PM
How do these compare to other quality aftermarket wrist pins for high performance poisons for our bikes? Weight? Strength?
Well, when they break, it's like poison! Lol. Who makes a 15mm aftermarket strong pin?

I guess I assumed pins that came with aftermarket pistons were far superior to stock ones to begin with.
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Tool Steel Wrist Pins
« Reply #12 on: September 08, 2017, 01:17:39 PM »
These are finished and shipping Monday. We have Bills order. Any others who have not called in an order better do so ASAP. We only made these because Russ needed them for the Sorcerer. We will not be making them again.    661-256-7309    salespat@aperaceparts.com
Logged

Offline gschuld

  • Master
  • *****
  • Posts: 2,346
Re: Tool Steel Wrist Pins
« Reply #13 on: September 08, 2017, 04:17:13 PM »
I've been trying to get in touch Jay.  Called and Emailed today.  I'm in for several sets if available.

George
Logged

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Tool Steel Wrist Pins
« Reply #14 on: September 09, 2017, 11:26:18 PM »
Pat will be on the phones at 6:30 AM on Monday.
Logged
Pages: [1]   Go Up
« previous next »