Author Topic: CB750 - Starter clutch still slipping after rebuild [VIDEO]  (Read 749 times)

0 Members and 1 Guest are viewing this topic.

Offline blackonblackonblack

  • Full Member
  • *
  • Posts: 7
I have been having issues with my starter clutch so I rebuilt it with new springs and rollers which did not make any difference at all. Now I'm thinking that it might be that the starting gear is too worn or could it be something entirely different? The starter motor has been rebuilt, all the electrics is brand new, and the flywheel bolt was torqued to 72ft-lb. Appreciate all the tips you might have!

Here is a short video of the terrible sound it made both before and after the rebuild:
« Last Edit: July 31, 2017, 01:35:39 PM by blackonblackonblack »

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,269
  • Humboldt, AZ
Re: CB750 - Starter clutch still slipping after rebuild [VIDEO]
« Reply #1 on: July 31, 2017, 07:04:20 PM »
It sounds like the hub on the gear, where the rollers ride, is worn:
http://forums.sohc4.net/index.php/topic,165124.25.html
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
Re: CB750 - Starter clutch still slipping after rebuild [VIDEO]
« Reply #2 on: July 31, 2017, 07:32:53 PM »
Scotly, did you ever turn one down?
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,269
  • Humboldt, AZ
Re: CB750 - Starter clutch still slipping after rebuild [VIDEO]
« Reply #3 on: July 31, 2017, 07:39:05 PM »
Before and after pics on reply #29 on that thread. ;)
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....