Topic: JIS bit

[beemerbum]

Does anyone know where a guy could buy a 3/8 drive JIS "Phillips" bit? The PO puke drove the cam cover screws with what must have been an air impact wrench.

[flybox1]

All over the interwebs...ebay, amazon, etc....
Vessel even has the Impacta Line of JIS screwdrivers.

[beemerbum]

I have a #$%*load of JIS Vessel screwdrivers. I'm looking for a bit that fits on a 3/8 drive ratchet handle with a JIS cross bit on the business end. The Impacta Vessel screwdrivers are not cutting it. I need to use an impact driver and not screw up the screws further with an American Phillips bit.

[madmtnmotors]

Cheap too:

https://www.vesseltools.com/industrial-bits/bit-sets/431801-detail


http://lmgtfy.com/?q=vessel+jis+impact+bits

[flybox1]

If the JIS drivers on hand are not cutting it, drill off the heads and be done w it 

[madmtnmotors]

Use the bits linked to above with a true impact driver. The "impact screwdrivers" are not as heavy duty as a true impact driver.

[magnum56]

I found and purchased all sizes of these from motion Pro on Amazon.

Only 1/4" drive size, but I used a standard 3/8 to 1/4 adapter in a 3/8 hand impact driver I've had for years.

And they fit all my other screwdriver handles.

https://www.amazon.com/gp/product/B06ZY8DMFB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

[540nova]

A #3 Apex bit works perfectly. Available at Lowes or Home Depot.

Sent from my SM-G955U using Tapatalk

[bochnak]

Search for vessel 2500 impact on ebay. I bought mine for $12 with all the bits. The vessel impacta screwdrivers are nice, however they won't loosen the stubborn ones.