Author Topic: Project B7 Underway! Billet Big Block Built By Bill BentON Racing (Read 62984 times)

dragracer · « **Reply #250 on:** March 26, 2018, 08:51:14 AM »

Quote from: gschuld on March 26, 2018, 05:37:48 AM

Sweet baby Jesus😳. Are you trying to give Frankie and Mike a seizure🙄

Take that useless for bracket racing old junk off...and send it to me😉

Here to help...

George

If he's happy with that hardware then I'm elated. I think its the 3rd month in 2018 right now, isn't it??😆

Bill/BentON Racing · « **Reply #251 on:** March 26, 2018, 11:48:33 AM »

Lol, it's March 26th.....and we furiously wrenching, we going make it with both bikes. Don t think you run coils like these with a distributor...hehe.

dragracer · « **Reply #252 on:** March 26, 2018, 12:48:02 PM »

Just remember, in 2018, cars use crank triggers and cam sensors. Bikes too. There's a reason for that but less moving parts to fall comes to mind quickly.

Bill/BentON Racing · « **Reply #253 on:** March 27, 2018, 03:29:02 AM »

Getting there. .

Bill/BentON Racing · « **Reply #254 on:** March 27, 2018, 03:30:26 AM »

Another

POPS 911 · « **Reply #255 on:** March 27, 2018, 03:51:18 AM »

MEDYO: Do you want me to bring a 750 MATIC to your location w/piston kit new and a gasket kit so you can build a Matic = I will pay you well and bring and pickup at your location. I got the frame ,tires, FRP body, fairing and 29's w/boots ready to go. NO PROBLEM truck trailer will travel 24-7 ......

POPS BK911 and SEL 1982

dragracer · « **Reply #256 on:** March 27, 2018, 02:21:40 PM »

Quote from: POPS 911 on March 27, 2018, 03:51:18 AM

MEDYO: Do you want me to bring a 750 MATIC to your location w/piston kit new and a gasket kit so you can build a Matic = I will pay you well and bring and pickup at your location. I got the frame ,tires, FRP body, fairing and 29's w/boots ready to go. NO PROBLEM truck trailer will travel 24-7 ......

POPS BK911 and SEL 1982

Pops, if the physical therapy doesn't help relieve my back issues, I may ask to borrow the Turtle 🐢 so I can continue to race. I need something that won't tank me around like my top gas bike. Those 1.10-1.12 sixty foot times put a strain on the body.

Medyo Bastos · « **Reply #257 on:** March 27, 2018, 03:59:29 PM »

Quote from: POPS 911 on March 27, 2018, 03:51:18 AM

MEDYO: Do you want me to bring a 750 MATIC to your location w/piston kit new and a gasket kit so you can build a Matic = I will pay you well and bring and pickup at your location. I got the frame ,tires, FRP body, fairing and 29's w/boots ready to go. NO PROBLEM truck trailer will travel 24-7 ......

POPS BK911 and SEL 1982

Pops, I’m liking the offer

Sent from my iPhone using Tapatalk

Bill/BentON Racing · « **Reply #258 on:** March 28, 2018, 05:54:36 PM »

The human drill press! .040 , 1mm hole for starter gear! Lol. We moving forward.....
Wow, a beautiful sight..to old men with high compression engines....lol

dragracer · « **Reply #259 on:** March 28, 2018, 11:35:51 PM »

Coming along well bud. Which starter motor did you use?

Bill/BentON Racing · « **Reply #260 on:** March 29, 2018, 04:45:08 AM »

Electric, 12v, OEM Honda! It worked well before. Tried 24v, worked great till Ebay 900F 438 starter said I don't want to play any more after about 20 starts or so. We'll see. I like it so far.....oil pump and BE done! Yippee Kai Yeah.

dragracer · « **Reply #261 on:** March 30, 2018, 12:59:58 AM »

Quote from: Bill/BentON Racing on March 29, 2018, 04:45:08 AM

Electric, 12v, OEM Honda! It worked well before. Tried 24v, worked great till Ebay 900F 438 starter said I don't want to play any more after about 20 starts or so. We'll see. I like it so far.....oil pump and BE done! Yippee Kai Yeah.

Alright. Thanks for the info. I'm setting the project F up to start on 24 volts using a Honda DOHC starter. I'm going to run fully advanced, locked out timing so I'll need the extra umph to get it spinning. I've been using a DOHC starter in my Crazy 8's 1325cc KZ since I built it 4 years ago and the starter motor hasn't failed me yet. I do need to rebuild the starter clutch at this point because it slips intermittently.

POPS 911 · « **Reply #262 on:** March 30, 2018, 05:43:09 AM »

FRANK: The 1982 CM450A Hondamatic that I'm putting together to race in MAN CUP SEL would be a ride in the park for you shifting from L to D with throttle wide open = Staging: hit that last stage bulb then lock down rear brake pedal and hold with left hand parking brake lever and open wide the throttle, last yellow throw out that parking brake lever and off you go [ .10 or .03 RT ] = at 7200 rpms on tach kick shift lever into drive. In 1/8 mile racing you can run the whole race in low gear. This bike had 3200 miles on it when I bought it from a 82 year old man that bought it brand new in 82. And you wonder why I want to see a 750A MATIC run 10's

?

POPS BK911 SEL1982

Bill/BentON Racing · « **Reply #263 on:** March 30, 2018, 08:54:07 PM »

Yippee Kai Yeah, one year + in the making....JMR billet block about to happen, thanks Mike. And thanks Kenny at CycleX.
Its going to be a good one I think. BE is finished! K.

dragracer · « **Reply #264 on:** March 31, 2018, 12:40:23 AM »

You're rolling right along Bill. Good to see the progress.

By the way, I sent you a text Friday with the measurements for the 72mm bore piston ring I need. Not certain if you had a chance to check yours yet for size. Let me know.

We're still planning to come to the race next weekend. At this point, I'm uncertain of my race status but the wife will be entering pro ET if I can get her engine back together and the bike tested beforehand. Head going back on tomorrow. Hope to finish it and fire it up Sunday but no later than Monday night.😌 Need to have it ready for test and tune at Darlington Dragway on Wednesday evening.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #265 on:** March 31, 2018, 10:39:36 AM »

Got word we'll have a new guest attendee at the races. He's rolling in Thursday. I don't think you guys have actually met him either. Billy, put up the flags for ID. I told him you usually occupy the finish line area.

See you guys Friday.

Sam Green Racing · « **Reply #266 on:** March 31, 2018, 10:58:32 AM »

Who's that Jerry ?

Jerry Rxman Griffin aka MuthaF'er · « **Reply #267 on:** March 31, 2018, 11:15:43 AM »

Wish it was you Sam

get yer ass back over! Surely you don't want me to spoil the surprise?

Sam Green Racing · « **Reply #268 on:** March 31, 2018, 11:19:35 AM »

hahahaha.

Bill/BentON Racing · « **Reply #269 on:** March 31, 2018, 07:07:56 PM »

Purple Rain is about done. Has elec start and charging system!

Bill/BentON Racing · « **Reply #270 on:** April 01, 2018, 10:37:47 AM »

Getting there, oh dem rings are THIN Mike! But I'm glad, thinner the better. Pewee, you are so right. Kit should come with 5 sets, lol. Only had to file the top rings. Wanted .012, were as tight as .006 . We carrying on.....Happy Easter ya'll!

MRieck · « **Reply #271 on:** April 01, 2018, 11:16:33 AM »

Quote from: Bill/BentON Racing on April 01, 2018, 10:37:47 AM

Getting there, oh dem rings are THIN Mike! But I'm glad, thinner the better. Pewee, you are so right. Kit should come with 5 sets, lol. Only had to file the top rings. Wanted .012, were as tight as .006 . We carrying on.....Happy Easter ya'll!

Yeah.....I hear you Bill. Actually the top 2 rings aren't bad....it is the oil rails. Like paper.

PeWe · « **Reply #272 on:** April 01, 2018, 12:15:46 PM »

Nice with that wonderful block!
Somebody mentioned thin oil rails?
Thin flimsy ones that just wait for popping out of the groove when cylinder is going on! I had to order new rings since I pinched one.
Look out for the oil rails not wanna be compressed completely when their sharp inner ends can hook into the expander ring.
My conclusion was:
Grind the inner corners of the rails a little so it cannot hook into the expander when compressing it. I wrote about this in Mikes Billet block thread.

The billet block was easier to get on when vibrating the piston and let the block get down by itself without pushing it.

Bill/BentON Racing · « **Reply #273 on:** April 02, 2018, 05:21:17 PM »

Checking, checking, checking. Lol. I like it.....

dragracer · « **Reply #274 on:** April 03, 2018, 12:21:38 AM »

Won't be long now.

Roll on brother Bill.

News:

Author Topic: Project B7 Underway! Billet Big Block Built By Bill BentON Racing (Read 62984 times)