Author Topic: Project B7 Underway! Billet Big Block Built By Bill BentON Racing (Read 60036 times)

Stev-o · « **Reply #25 on:** August 29, 2017, 05:04:08 pm »

Nice color choice

Bill/BentON Racing · « **Reply #26 on:** September 11, 2017, 09:35:38 am »

Thanks, I'm rather fond of it, good contrast. Wilbur and Larry are fine, great news. I'm back at it, shoulder injury acting up bad. But here's some pics.

scunny · « **Reply #27 on:** September 11, 2017, 11:13:22 am »

whats the wee hand trowl with the gauge. I see it is inch pounds, torque wrench ?

Bill/BentON Racing · « **Reply #28 on:** September 11, 2017, 11:38:41 am »

Yes, my favorite, Snap On 3/8 inch 0-600 inch lbs. Had it since 1984. Bill

dunc · « **Reply #29 on:** September 12, 2017, 12:15:51 am »

excited to see how this comes together!

754 · « **Reply #30 on:** September 12, 2017, 08:28:29 pm »

Bill , is the red thing a rod press ?

Sam Green Racing · « **Reply #31 on:** September 13, 2017, 04:26:39 am »

Billy, with just over a week to go, will it be ready for the Rock ?

MRieck · « **Reply #32 on:** September 13, 2017, 05:29:06 am »

Quote from: 754 on September 12, 2017, 08:28:29 pm

Bill , is the red thing a rod press ?

Yes....I have the same one.

slikwilli420 · « **Reply #33 on:** September 13, 2017, 06:32:33 am »

Quote from: MRieck on September 13, 2017, 05:29:06 am

Quote from: 754 on September 12, 2017, 08:28:29 pm
Bill , is the red thing a rod press ?
Yes....I have the same one.

Enlighten us, what does it do related to the rod?

kmb69 · « **Reply #34 on:** September 13, 2017, 09:20:40 am »

It's technically called a "Connecting Rod Vise".

http://www.jegs.com/i/Proform/778/66769/10002/-1

Bill/BentON Racing · « **Reply #35 on:** September 13, 2017, 09:41:30 am »

You'd be correct sir! Here I'm using it to loosen the rod bolts, but has many other uses, Bill

dragracer · « **Reply #36 on:** September 13, 2017, 01:14:46 pm »

Coming along well there Bill.

Question about the shoulder; Was it the discomfort a flair up from the RC car injury, the bicycle fall or the pit bull attack? I know you've been through a lot the last 3 years or so. Just hope everything will be okay. We've got racing to do- you don't have time for that crap!!!

seanbarney41 · « **Reply #37 on:** September 13, 2017, 06:29:59 pm »

wow...I love any pics from inside Bill's bat cave....soooo much cool #$%* to look at. Is that a MT125 hangin' out back there?

Bill/BentON Racing · « **Reply #38 on:** September 14, 2017, 05:28:28 am »

Thanks. Frank, my hand has healed from the dog attack. But it aggravated the old injury from the RC crash, hurts 24/7, sometimes wrong inside besides the partial rotator cuff tear. Going to Rockingham, that's all I know now. Not sure if /what I'll be riding. Jimmy said he was 3rd in SET and I was 30th, but they gotta give me Valdosta points and I'd be 15th he said. Gotta check. Glad you ok.

dragracer · « **Reply #39 on:** September 14, 2017, 04:51:23 pm »

Crap Bill, we need to put a roll cage around you when you go out in public from now on.

brandEn · « **Reply #40 on:** September 15, 2017, 10:42:34 am »

I definitely am following this build...

Bill/BentON Racing · « **Reply #41 on:** September 18, 2017, 05:15:30 pm »

Well, lookee here.....oh, u wanna know what one weighs? OK later tonight hehe....lol, Bill

gschuld · « **Reply #42 on:** September 18, 2017, 06:04:51 pm »

47 grams each is my guess.

George

Bill/BentON Racing · « **Reply #43 on:** September 19, 2017, 04:51:08 pm »

Wow, 46, K. Way to go Jay. Been busy, Carrillo's installed. Getting there. Gotta get ready for Rockingham.

dragracer · « **Reply #44 on:** September 20, 2017, 09:04:05 am »

Looking good. You'll get it done!!!

But what's going on with the engine that's on the bike???

Bill/BentON Racing · « **Reply #45 on:** September 21, 2017, 03:33:56 am »

It's going to come apart for steel rods, Carrillo or CycleX. And then swap cam also. Plan is to run new engine in November.

Bill/BentON Racing · « **Reply #46 on:** September 21, 2017, 04:57:27 pm »

Not a chance brother. Shooting for Valdosta in November, think we can do that. Keith's rebuilding a primary drive for me, sent him 3 today to choose from, lol, Bill

dragracer · « **Reply #47 on:** September 21, 2017, 10:02:38 pm »

I've got to drop the rebuild parts off next week for my local guy to rebuild a primary for the project bike engine. I've definitely got to do one for the red bike in the off season when I fresh up the engine. Hoping I can get another 20 years out of this motor.

Bill/BentON Racing · « **Reply #48 on:** October 13, 2017, 05:14:28 am »

Keith, here's a pic. I'm using the one on the left, thanks, Bill

kmb69 · « **Reply #49 on:** October 13, 2017, 07:07:42 am »

Got it. It's the clutch basket you are going to have to pay attention to.
Pics are good on the forum - stretched vertically in your emails.

News:

Author Topic: Project B7 Underway! Billet Big Block Built By Bill BentON Racing (Read 60036 times)