Author Topic: Project B7 Underway! Billet Big Block Built By Bill BentON Racing (Read 62820 times)

Bill/BentON Racing · « **Reply #200 on:** March 10, 2018, 11:50:53 AM »

Yes, $100.00 normally I'd guess

Bill/BentON Racing · « **Reply #201 on:** March 10, 2018, 05:44:48 PM »

Alright, progress, hadn't touched it since we went picking in Tennessee a week ago. Clutch and elec starter next. Here's your rod protectors, Keith, I ordered you 2 sets!!Lol, Bill

madmtnmotors · « **Reply #202 on:** March 10, 2018, 06:19:07 PM »

Quote from: Bill/BentON Racing on March 10, 2018, 05:44:48 PM

Alright, progress, hadn't touched it since we went picking in Tennessee a week ago. Clutch and elec starter next. Here's your rod protectors, Keith, I ordered you 2 sets!!Lol, Bill

Holy cow! Clock is ticking! I thought I was dragging behind, and all I'm going to do is swap fuel tanks and inspect the clutch. I got this cool purple fuel tank from some guy that is already set up to receive my brand new Pingel fuel valve...

Gotta keep those PD carbs from going lean at 9500rpm.

Bill/BentON Racing · « **Reply #203 on:** March 10, 2018, 07:51:47 PM »

You need my new to me set of 29 smootthbores. Found them in a box with this.....lol, but I didn't even know I had Vertex instructions...30 minutes later we, me and BabyFace that is, so showed him the instructions, took him a minute to digest it. He hit the ground running, chased his ass all the way to some guys house in Southaven, he was barking and trying to get under the bed! Lol

dragracer · « **Reply #204 on:** March 10, 2018, 08:03:53 PM »

Roll on Bill. At least one of us seems to making something happen. I'm in the middle of going through my physical therapy sessions. I'll know better where I stand the first week in April.

Bill/BentON Racing · « **Reply #205 on:** March 10, 2018, 08:33:44 PM »

Uh, you supposed to be racing then! Hope you can, but main thing is getting you better....Gluck, Bill
Working on 3 different builds rt now, Mine, the Chapman and Purple Rain!

dragracer · « **Reply #206 on:** March 10, 2018, 11:41:12 PM »

Quote from: Bill/BentON Racing on March 10, 2018, 08:33:44 PM

Uh, you supposed to be racing then! Hope you can, but main thing is getting you better....Gluck, Bill
Working on 3 different builds rt now, Mine, the Chapman and Purple Rain!

In the words of a well known preacher: I'm going to " keep hope alive". If I'm not able to race,you and Trey can compete against one another until I can get back into the mix😁

Git er done!!!

Cb750 Racer · « **Reply #207 on:** March 11, 2018, 11:59:53 AM »

Really excited to see this build come together so quickly. Bill you truly do have the baddest collection of Cb750's there ever was.

754 · « **Reply #208 on:** March 11, 2018, 12:34:04 PM »

I have a new RC angle drive for that magneto, too bad its FOR KAWI motors.
I would trade for a Honda drive unitl.

dragracer · « **Reply #209 on:** March 11, 2018, 12:49:52 PM »

My suggestion on the magneto is to gut it out, put a Dyna S behind the cover, add a pair of hot coils and call it a day. Period correct is just that, correct for that period in time when we had few choices.

My 2 cents.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #210 on:** March 11, 2018, 02:16:20 PM »

Frank, you're sounding just like Mike now

dragracer · « **Reply #211 on:** March 11, 2018, 03:02:52 PM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on March 11, 2018, 02:16:20 PM

Frank, you're sounding just like Mike now

Jerry, all I can say at this point is this reminds me of that road race style bike at the beginning of the calendar girl thread. How long did the poking and prodding last that eventually lead to a ten second pass on a 30 year bucket list. ☹

Bill/BentON Racing · « **Reply #212 on:** March 11, 2018, 03:55:24 PM »

The magneto is for my street build, mag on one side, Drouin supercharger on the other ......Frank your analogy was funny.
I'm working on sumpin for dat nitrous oxide bike also...Double 9's in our future! Lol, Bill

dragracer · « **Reply #213 on:** March 11, 2018, 05:16:14 PM »

Ahhh, now we're getting some excitement flowing here. You're making something happen and I can't even throw a leg over a bike. Lol. I love this stuff.

Bill/BentON Racing · « **Reply #214 on:** March 11, 2018, 06:14:29 PM »

Yep, we both going power adder! Which one....Lol

dragracer · « **Reply #215 on:** March 11, 2018, 08:22:03 PM »

Quote from: Bill/BentON Racing on March 11, 2018, 06:14:29 PM

Yep, we both going power adder! Which one....Lol

Ultimately, the numbers we both run will be dictated by how well we manage the power adder. Be it turbo, or nitrous its about how you use it that will net the best results. Both can set records and both can destroy parts when not set up correctly. Lets do our best to stay safe.

dragracer · « **Reply #216 on:** March 12, 2018, 12:02:11 AM »

I've been busy working on something. Its just not an SOHC. Its been sitting on the bench since November. I'm just now able to start back getting it together.😠.

SOHC next.

Bill/BentON Racing · « **Reply #217 on:** March 12, 2018, 02:58:41 AM »

Yep, Safety and Fun first two and in that order! C'mon Frank, hope you're getting better.

POPS 911 · « **Reply #218 on:** March 14, 2018, 02:11:01 AM »

FRANK: Bill said SUPERCHARGER , we [MSP] put a SUPERCHARGER on a BUSA that Joe bought off a guy name Richard from England [ with no instructions] at a dealers show in the USA. Did not have a key way on pulley , he Richard told us friction would hold it in place. My A$$ = Ward put key way slots in pulley and crank look around how many Busa have you seen with a Supercharger..... Bill will have a head tuner when the power comes on under full BOOST.

POPS BK911

Bill/BentON Racing · « **Reply #219 on:** March 14, 2018, 08:18:29 AM »

POP'S, if I can find a Magnuson one Id go that route. But rt now we going hair dryer assist! Stay tuned. Oh yeh bring that $500.00 to 42.... somebody going take your money ,at least they trying!! Lol, Bill

dragracer · « **Reply #220 on:** March 14, 2018, 12:22:00 PM »

Pops, I need you to do a favor for me. On your way to the Cup race at Dragway 42, could you detour over to Beasely fiberglass to pick up an oversized box. I intend to buy a Busa Pro mod body by shipping costs will kill me. You could deliver the body to Bill at the track and I'd get it from him in Georgia.

754 · « **Reply #221 on:** March 14, 2018, 01:41:37 PM »

Quote from: Bill/BentON Racing on March 14, 2018, 08:18:29 AM

POP'S, if I can find a Magnuson one Id go that route. But rt now we going hair dryer assist! Stay tuned. Oh yeh bring that $500.00 to 42.... somebody going take your money ,at least they trying!! Lol, Bill

There is a Magnuson on ebay right now, you build the drive.. pretty easy.
Its at 1250 maybe NOS, every weekend he drops the price, then puts it back up. . Have seen it down to 875 or 900..

Medyo Bastos · « **Reply #222 on:** March 14, 2018, 02:06:59 PM »

Or ~>

Sent from my iPhone using Tapatalk

bear · « **Reply #223 on:** March 15, 2018, 12:52:17 AM »

Compressors should be used to blow up tires, not motor cycle motor's

Bill/BentON Racing · « **Reply #224 on:** March 16, 2018, 08:06:21 PM »

Back at it....

News:

Author Topic: Project B7 Underway! Billet Big Block Built By Bill BentON Racing (Read 62820 times)