Topic: Cb350f camshaft "bearings"

[Markpig]

Hi guys I'm building a cb350f for my wife, and upon rebuilding the engine I've come across pitting on one of the cam journals / bearings. As the aren't replaceable or able to do needle bearing conversions, just after some opinions or advice on whether it is still usable.


Thanks Rhys

[magnum56]

As long as your measurements are within tolerance range, some pitting should not cause you an issue.

Just a place for a little more oil to settle in.

[Markpig]

Thanks , the other 3 are perfect. Just this one is a bit shabby, low oil flow I imagine.