Author Topic: Cb350f camshaft "bearings"  (Read 608 times)

0 Members and 1 Guest are viewing this topic.

Offline Markpig

  • Full Member
  • *
  • Posts: 2
Cb350f camshaft "bearings"
« on: September 08, 2017, 04:38:40 AM »
Hi guys I'm building a cb350f for my wife, and upon rebuilding the engine I've come across pitting on one of the cam journals / bearings. As the aren't replaceable or able to do needle bearing conversions, just after some opinions or advice on whether it is still usable.


Thanks Rhys


Offline magnum56

  • Enthusiast
  • **
  • Posts: 186
Re: Cb350f camshaft "bearings"
« Reply #1 on: September 08, 2017, 08:44:40 AM »

As long as your measurements are within tolerance range, some pitting should not cause you an issue.

Just a place for a little more oil to settle in.

'74 CB750K

Offline Markpig

  • Full Member
  • *
  • Posts: 2
Re: Cb350f camshaft "bearings"
« Reply #2 on: September 08, 2017, 02:31:05 PM »
Thanks , the other 3 are perfect. Just this one is a bit shabby, low oil flow I imagine.