« previous next »
Pages: [1]   Go Down

Author Topic: Cb750 carb Fotment issues.  (Read 761 times)

0 Members and 1 Guest are viewing this topic.

Offline terrorshark

  • Full Member
  • *
  • Posts: 36
Cb750 carb Fotment issues.
« on: October 31, 2017, 11:38:23 AM »
Just picked up new intake boots for this thing and the carbs won't fit back on correctly. Seems like they are angled up too high and the choke cable perch won't fit. Any ideas on this?  They are the older style carbs I beleive similar to the cb550.
Logged
'68 MV Agusta Tevere Motocarro
'72 Yamaha LS2
'74 MV Agusta 350b
'74 Honda CB550
'77 MV Agusta 350 Ipotesi
'00 MV Agusta F4

Offline pjlogue

  • Expert
  • ****
  • Posts: 1,034
Re: Cb750 carb Fotment issues.
« Reply #1 on: October 31, 2017, 04:14:32 PM »
Check the new against the old ones.  The angles and lengths should be the same.  Some aftermarket boots don't quite fit properly.  Also, it takes some tweaking to get them fitted properly.  They may have 1 marked on one side and 4 on the opposite side and the same with 2-3.  The number facing up should match the cylinder number.

-P.
Logged

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: Cb750 carb Fotment issues.
« Reply #2 on: October 31, 2017, 08:03:16 PM »
 What year 750 and what is a cable perch your referring to ? 77-78 had a chock cable, not so on pre 77 round tops. Got a picture of what your working with ?
Logged
Pages: [1]   Go Up
« previous next »