« previous next »
Pages: [1]   Go Down

Author Topic: 75 “f” series engine, need a frame.  (Read 1145 times)

0 Members and 1 Guest are viewing this topic.

Offline Reble

  • Full Member
  • *
  • Posts: 2
75 “f” series engine, need a frame.
« on: November 23, 2017, 04:08:02 PM »
I have a complete 75 f series engine that I am looking to get a frame for. Do you guys know what years will hold my engine without modification? Also any places to look for them in the Colorado area?
Logged

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,508
  • To many bikes-but lookin' for more
Re: 75 “f” series engine, need a frame.
« Reply #1 on: November 24, 2017, 04:18:56 AM »
 That year of F engine will slide nicely into a 75-76 F frame or any of the 70-76 K frames. If you use it in a 77-78 K or F you will have to work out the sprocket offset which is not a huge obstacle.
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 15,031
  • Bought her new 4/75
Re: 75 “f” series engine, need a frame.
« Reply #2 on: November 24, 2017, 02:30:22 PM »
+1 on Steel's perhaps? Curtis at Action Cycles in Colorado Springs?
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Reble

  • Full Member
  • *
  • Posts: 2
Re: 75 “f” series engine, need a frame.
« Reply #3 on: November 26, 2017, 03:56:39 PM »
Quote from: ekpent on November 24, 2017, 04:18:56 AM
That year of F engine will slide nicely into a 75-76 F frame or any of the 70-76 K frames. If you use it in a 77-78 K or F you will have to work out the sprocket offset which is not a huge obstacle.

Good to know about the sprocket and the years, thanks.
Logged
Pages: [1]   Go Up
« previous next »