« previous next »
Pages: [1]   Go Down

Author Topic: Brake disk (disc)? bolts  (Read 441 times)

0 Members and 1 Guest are viewing this topic.

Offline beemerbum

  • Expert
  • ****
  • Posts: 1,065
Brake disk (disc)? bolts
« on: January 12, 2018, 04:35:39 PM »
I found a discussion regarding the torque value on these bolts. However, the various contributors had varied numbers. Can't find the number for a '77 750. Help please.
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,755
  • Bike almost back to the 70's 2015
Brake disk (disc)? bolts
« Reply #1 on: January 13, 2018, 02:53:02 AM »
Check the std torque for M8 as the manual has. Use loctite medium thread lock.
I use Yamiya750’s longer bolts for dual discs. The thin nuts included got max 10Nm and loctite.
I should tighten M8 around 15 Nm orherwise.
« Last Edit: January 13, 2018, 03:07:09 AM by PeWe »
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967
Pages: [1]   Go Up
« previous next »