« previous next »
Pages: [1]   Go Down

Author Topic: Wheel offset?  (Read 1009 times)

0 Members and 1 Guest are viewing this topic.

Offline gmog44

  • Full Member
  • *
  • Posts: 23
Wheel offset?
« on: January 23, 2018, 11:02:24 PM »
Hi,
I've started a CB450 project, and the rear wheel is off-center by at least an inch.  Manuals and interwebs have not been helpful...  Can someone advise whether this image looks accurate? 
Thanks in advance,
Garth
Logged
'78 CB550
'72 CB450

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,032
  • I refuse...
Re: Wheel offset?
« Reply #1 on: January 24, 2018, 04:11:44 AM »
Looks like the wrong wheel spacers. Especially the right side one.
https://www.cmsnl.com/honda-cb450k7-1974-usa_model455/partslist/F++15.html#results
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline lowriderbud

  • Full Member
  • *
  • Posts: 41
Re: Wheel offset?
« Reply #2 on: January 24, 2018, 07:56:31 AM »
The image does not look accurate.

Appears the chain is running at an angle.  You might have the spacers swapped, or as mentioned above the wrong spacers altogether. I would start by making sure the chain is tracking straight and smooth on the sprockets, determine what the length of the spacers should be for proper alignment.

Later, Bud...
Logged

Offline gmog44

  • Full Member
  • *
  • Posts: 23
Re: Wheel offset?
« Reply #3 on: January 26, 2018, 12:27:44 PM »
Thanks for the replies, and the link.  Since the whole rear end needs to be rebuilt, I'll look at simply replacing all of the spacers to make sure I have the right ones, check alignment, etc.  I appreciate the input!
Garth
Logged
'78 CB550
'72 CB450
Pages: [1]   Go Up
« previous next »