« previous next »
Pages: [1]   Go Down

Author Topic: 78 Intake Boots vs. 75 Intake Boots?  (Read 1683 times)

0 Members and 1 Guest are viewing this topic.

Offline jrrobertsjr

  • Enthusiast
  • **
  • Posts: 149
  • If you aren't scared, your not going fast enough.
78 Intake Boots vs. 75 Intake Boots?
« on: January 04, 2007, 12:57:38 PM »
Due to a potential solution for another problem I may have (vacuum leak), I started doing a bit of research on intake boots.

I called my local Honda Dealer and they can get the boots. The question is which set to get.

I have a 78K motor and carbs off a 75K.

16211300030 INSULATOR,A.CARB
16212300030 INSULATOR,B.CARB

When I looked up the part numbers, I found that the 75 boots were 2 different part numbers for 1-4 and 2-3. No problem there. That is the setup that I have now.

The 78 boots however were 4 different part numbers.

16211405000 INSULATOR 1,CARB.   
16212405000 INSULATOR 2,CARB. 
16213405000 INSULATOR 3,CARB.
16214405000 INSULATOR 4,CARB.   

The ones for the 78 look completely different. Is this due to the updated carbs?
Logged

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,492
Re: 78 Intake Boots vs. 75 Intake Boots?
« Reply #1 on: January 04, 2007, 12:59:54 PM »
from what i understand the 78 carbs have a larger throat inlet,but im not sure of the inlet on the head.someone more versed than me on the almighty k8 would have to answer this better.good luck
Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline jrrobertsjr

  • Enthusiast
  • **
  • Posts: 149
  • If you aren't scared, your not going fast enough.
Re: 78 Intake Boots vs. 75 Intake Boots?
« Reply #2 on: January 04, 2007, 01:06:07 PM »
Cool.

Thanks, Duster.

I hope he sees this and gives it his input.

Johnny out.
Logged

Offline scondon

  • No way my run was THAT slow, must be an
  • Old Timer
  • ******
  • Posts: 3,137
  • Mmmm......tasty bugs
Re: 78 Intake Boots vs. 75 Intake Boots?
« Reply #3 on: January 04, 2007, 01:15:20 PM »
   The 75 boots will fit both the carbs and your '78 motor. The '78 carbs are larger diameter, as Duster' points out, so the '78 boots are larger on the carb side, but the intake manifolds on the '78 K engine/head are the same size as a '75 engine.

   Not sure why there are 4 different part #'s for the '78 boots. The ones I have(78 F) are two types, 1&4 or 2&3, just like the setup you have now.

Logged
Give me..a frame to build a bike on, and my imagination will build upon that frame

Offline jrrobertsjr

  • Enthusiast
  • **
  • Posts: 149
  • If you aren't scared, your not going fast enough.
Re: 78 Intake Boots vs. 75 Intake Boots?
« Reply #4 on: January 04, 2007, 01:30:13 PM »
Excellent. Thanks again for the second time today, Scondon.

100 bucks for the 4. WOW.... Ramen noodles for another two weeks. Again!

Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,929
  • Bought her new 4/75
Re: 78 Intake Boots vs. 75 Intake Boots?
« Reply #5 on: January 04, 2007, 10:06:39 PM »
Ramen noodles are great. 17ยข per meal from King Soopers (Krogers, etc) this week still allows for cheap beer and motorcycle parts too!
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

ajames86

  • Guest
Re: 78 Intake Boots vs. 75 Intake Boots?
« Reply #6 on: September 14, 2010, 01:37:21 PM »
any idea if I can get a different year to fit my 78 F? cant find the damn things anyplace.
Logged

Offline mick750F

  • Expert
  • ****
  • Posts: 1,395
Re: 78 Intake Boots vs. 75 Intake Boots?
« Reply #7 on: September 14, 2010, 03:43:33 PM »
Quote from: ajames86 on September 14, 2010, 01:37:21 PM
any idea if I can get a different year to fit my 78 F? cant find the damn things anyplace.

   You can try here...http://www.classicmotorcyclesolution.com/1_7_Products.html

Mike
Logged
'
Glosta, MA
It's not the heat...it's the humanity.
Pages: [1]   Go Up
« previous next »