« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: 1975 CB400F Build in New Zealand  (Read 4146 times)

0 Members and 1 Guest are viewing this topic.

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #25 on: June 12, 2018, 08:27:51 PM »
All slowed down a little again while waiting for some parts and still doing some fiddly bits. New handlebars and headlamp have arrived. Wanted to install them on the bike and then found like I have been told before that one cannot always go by some of the wiring diagrams supplied in the books. One service manual shows the CB350F and CB400F as being the same wiring. Nope, not with this one. Now worked it out that the New Zealand CB400F has the same wiring diagram and switches as the United Kingdom model so all good from here on with that. The UK model having a park light switch and park light. The CB350F is the same wiring and switches as the States. She has the front forks back on the bike and a front wheel and new pics will be published when the headlight and handlebars are back on it as well.
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline Athame57

  • Athame57
  • Full Member
  • *
  • Posts: 64
Re: 1975 CB400F Build in New Zealand
« Reply #26 on: June 15, 2018, 12:51:21 PM »
I like the fuel tank cap with the gauge on it. Was that standard with Kiwi CB400F's? Can I get one for mine?
Logged
I brake for animals!

Offline MauiK3

  • A K3 is saved
  • Old Timer
  • ******
  • Posts: 4,275
  • Old guy
Re: 1975 CB400F Build in New Zealand
« Reply #27 on: June 15, 2018, 03:04:25 PM »
Super project, I wish I could find a 350 or 400 F here to save, I've only seen one and it was in good shape.
Logged
1973 CB 750 K3
10/72 build Z1 Kawasaki

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #28 on: June 15, 2018, 05:53:06 PM »
Quote from: Athame57 on June 15, 2018, 12:51:21 PM
I like the fuel tank cap with the gauge on it. Was that standard with Kiwi CB400F's? Can I get one for mine?
Hi... the fuel cap was probably an aftermarket extra. Not sure if they are still available. This one will be coming off the tank and the standard cap fitted, as the glass is missing, and if memory serves me correct what ever was underneath to control it. Should be doing the work required on the tank this coming week.
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #29 on: June 15, 2018, 05:58:15 PM »
Quote from: MauiK3 on June 15, 2018, 03:04:25 PM
Super project, I wish I could find a 350 or 400 F here to save, I've only seen one and it was in good shape.
Hi ... the 350 and 400 f's are getting hard to find now over here. Not many around and although I have sold a few parts lately for the 350f I think people will start to find it hard to get what they want for them to do them up. I have had to go offshore to get some parts for the 400f. Really do feel now that I have saved this bike from being broken up. I have 2 x 1973 CB350F bikes and this 1975 CB400F. If it were not for some of the spares I had put away for the 350f bikes the rescue of it may not have been able to be done.
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #30 on: June 16, 2018, 12:45:33 AM »
Quote from: Athame57 on June 15, 2018, 12:51:21 PM
I like the fuel tank cap with the gauge on it. Was that standard with Kiwi CB400F's? Can I get one for mine?
Googled and found this so they must be available
https://www.ebay.com/itm/Fuel-Gauge-Cap-for-Honda-CB250T-CB350F-360-CB400F-CB500T-CB550K-CB750-K0-K4-/223018711110?oid=222979253812
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline Bodi

  • Really Old Timer ...
  • *******
  • Posts: 5,696
Re: 1975 CB400F Build in New Zealand
« Reply #31 on: June 16, 2018, 05:51:06 PM »
Whatever floats your boat, but these caps are really crappy fuel gauges. The span between E and F is not adjustable in the gauge, so the float height difference will very probably not match your tank depth. You can set it to hit E when reserve is imminent, but it likely will never be F... or be F for the top half tank.
The chain and float rattle around in the tank, maybe not super annoying but definitely noticeable.
I had a couple of these, probably not the identical same model of course... one I bought and one came on a bike I bought. Never happy with them.
I would find better uses for $100.00
Logged

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #32 on: June 27, 2018, 09:54:21 PM »
Have built up a set of carbs for the bike, rebuilt the speedo that was on the bike as I wanted the original mileage to stay with it, have done a great deal of prep work on the tank and now should be ready to spray. Will get the paint tomorrow for it. Still waiting for the hand grips, master cylinder, clutch cable and clutch adjuster bolt to arrive. The led bulbs I had ordered from China, damn they sent the wrong units, so made a claim against them and have ordered some more. The led bulbs are for the gauges on the bike and will last a long time being able to put up with the bumpy Taranaki roads.
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline jaytee-nz

  • Hot Shot
  • ***
  • Posts: 639
Re: 1975 CB400F Build in New Zealand
« Reply #33 on: July 01, 2018, 01:37:59 AM »
Phil - who is going to paint it for you, as I'll be looking for a painter for my CB500 soon ?
Is Pat Fake still around ?
Cheers - John
Logged

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #34 on: July 01, 2018, 01:17:50 PM »
I believe Pat Fake is retired now. He is in New Plymouth still and in our NP Classic Motorcycle Club. I will be painting this bike myself, as there are no candy type colours like the earlier fours had. Pat Fake did my CB350F and refused to use the transfers I had for the tank stripes. He did them in paint and he just makes one magnificent job. You can get him at pat.fake@gmail.com
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #35 on: July 04, 2018, 06:57:45 PM »
Nice sunny winter's day here today, and just warm enough after lunch to get the paint on the tank and side covers in my open air spray booth. Pics are when they had had their first coat, but applied 3 coats all up. Looking good. Sprayed them in Dulon paint in the colour of Honda Milano Red. Once hardened off will buff them up and then apply the decals.
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,896
  • Saver of unloved motorcycles.
Re: 1975 CB400F Build in New Zealand
« Reply #36 on: July 14, 2018, 03:00:03 PM »
 I added the park light and right side switch to my US model. It took a bit of head scratching but when I found and removed the us only jumper from the wiring it got easy.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline fishman_Phil

  • Hot Shot
  • ***
  • Posts: 291
Re: 1975 CB400F Build in New Zealand
« Reply #37 on: July 16, 2018, 09:31:54 PM »
The bike is just waiting for the new decals from Canada, Tank securing rubber from the States, and some led bulbs for the gauges from China. Put some petrol in the tank today and she burst back into life. Not been ridden since 1988 to the best of my knowledge and I was able to give it a little run around the yard and down the driveway and back. There will be some little things to sort out as time goes by. The riding position with the low handlebars and rear sets are a bit tough on my hip joints, so it is most likely be put up for sale when finished rather than change it from standard. I know, you want pics, but I am waiting until the decals for the tank arrive and led bulbs for the gauges and then I will treat to some before and after pics.
Logged
1972 Honda CB350F (2); 1975 CB400F; 1983 CBX400F (1); 1962 Suzuki MA50 (1); Suzuki M15 (3); Suzuki M15Mk2 (2); Suzuki M31 (2); 1936 James H12 (2); 1948 Triumph Speed Twin 500; 1989 Suzuki GSXR250F; Yamaha Chappy (2); alot of work yet to be done.
Pages: 1 [2]  All   Go Up
« previous next »