« previous next »
Pages: [1]   Go Down

Author Topic: Front end swap: shortening clutch cable?  (Read 1571 times)

0 Members and 1 Guest are viewing this topic.

Offline DHuffman

  • Enthusiast
  • **
  • Posts: 206
  • '77 CB750F
    • Follow me on instagram!
Front end swap: shortening clutch cable?
« on: May 08, 2018, 07:59:47 AM »
Hey guys,
I wanted to see how you guys worked out your cables after swapping the front end or handlebars. The Yamaha R6 front end on my bike is significantly lower than the stock one on my '77 CB750F, and so the clutch cable was about 10" too long. So far, I cut off the barrel on the end, pulled it though the cable housing a good way, cut it off, and added on a screw-on barrel for the clutch cable.  However, I don't have the silver crimped cable stop that fits into the cable adjustment on the handlebar.

Does anyone have recommendations of where to buy ends or a tool to crimp them? or just where I could order a custom cable that would suit my needs?
Logged

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Front end swap: shortening clutch cable?
« Reply #1 on: May 08, 2018, 08:06:51 AM »
I have never made a cable but Venhill make some nice kits with a lot of ends to solder on so thats one choice. The other is custom from either Barnett or Motion Pro. I don't know about Barnett pricing but Motion Pro is at least triple the price of a stock length cable.
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline 70CB750

  • Labor omnia vincit improbus.
  • Really Old Timer ...
  • *******
  • Posts: 14,801
  • Northern Virginia
Re: Front end swap: shortening clutch cable?
« Reply #2 on: May 08, 2018, 08:17:54 AM »
Stuff like that I buy on ebay.  I made my own cables before, it is not that hard.
Logged
Prokop
_______________
Pure Gas - find ethanol free gas station near you

I love it when parts come together.

Dorothy - my CB750
CB750K3F - The Red
Sidecar


CB900C

2006 KLR650

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,566
  • Bike almost back to the 70's 2015
Re: Front end swap: shortening clutch cable?
« Reply #3 on: May 08, 2018, 11:06:36 AM »
Find a new cable of correct lenght that fits?
Boring if the home made shortening will come loose and you must ride without clutch.
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Bankerdanny

  • Eventually I will be old enough in reality to be
  • Really Old Timer ...
  • *******
  • Posts: 7,626
  • Endeavor to persevere
Re: Front end swap: shortening clutch cable?
« Reply #4 on: May 08, 2018, 11:34:22 AM »
Quote from: slikwilli420 on May 08, 2018, 08:06:51 AM
I have never made a cable but Venhill make some nice kits with a lot of ends to solder on so thats one choice. The other is custom from either Barnett or Motion Pro. I don't know about Barnett pricing but Motion Pro is at least triple the price of a stock length cable.

I've gotten quotes from Motion Pro on custom cables before. It isn't that expensive and it saves a lot of hassle. You just give them the stock item number and tell them how much shorter you want it. It's really semi-custom, and so not that much more.
Logged
"The problem with quotes on the Internet is that you never know if they're true" - Abraham Lincoln

Current: '76 CB750F. Previous:  '75 CB550F, 2007 Yamaha Vino 125 Scooter, '75 Harley FXE Superglide, '77 GL1000, '77 CB550k, '68 Suzuki K10 80, '68 Yamaha YR2, '69 BMW R69S, '71 Honda SL175, '02 Royal Enfield Bullet 500, '89 Yamaha FJ1200

Offline slikwilli420

  • Master of Disaster
  • Master
  • *****
  • Posts: 2,362
Re: Front end swap: shortening clutch cable?
« Reply #5 on: May 08, 2018, 11:49:47 AM »
Quote from: Bankerdanny on May 08, 2018, 11:34:22 AM
Quote from: slikwilli420 on May 08, 2018, 08:06:51 AM
I have never made a cable but Venhill make some nice kits with a lot of ends to solder on so thats one choice. The other is custom from either Barnett or Motion Pro. I don't know about Barnett pricing but Motion Pro is at least triple the price of a stock length cable.

I've gotten quotes from Motion Pro on custom cables before. It isn't that expensive and it saves a lot of hassle. You just give them the stock item number and tell them how much shorter you want it. It's really semi-custom, and so not that much more.

Good to know!!
Logged
All you gotta do is do what you gotta do.

Vintage Speed Parts Mashup: http://forums.sohc4.net/index.php?topic=133638.0
Rickman CR Parts Kit Refresh: http://forums.sohc4.net/index.php/topic,154837.0.html
AHRMA CB750 Racer: http://forums.sohc4.net/index.php/topic,158461.0.html
AHRMA Superbike Heavyweight Racer: http://forums.sohc4.net/index.php/topic,173120.0.html
'76F CB750 Patina Redemption: http://forums.sohc4.net/index.php/topic,174871.0.html

Offline DHuffman

  • Enthusiast
  • **
  • Posts: 206
  • '77 CB750F
    • Follow me on instagram!
Re: Front end swap: shortening clutch cable?
« Reply #6 on: May 10, 2018, 06:52:55 AM »
The kits from Venhill look perfect. I'm assuming the ferrules are the crimp on caps for the housing? What tool do you need to crimp them?
Logged

Offline SDmtnbkr

  • Full Member
  • *
  • Posts: 64
Re: Front end swap: shortening clutch cable?
« Reply #7 on: September 02, 2018, 10:36:36 PM »
Quote from: DHuffman on May 10, 2018, 06:52:55 AM
The kits from Venhill look perfect. I'm assuming the ferrules are the crimp on caps for the housing? What tool do you need to crimp them?

What did you end up doing for your clutch cable? Even with the shortened Motion Pro mine is about 4in too long.... and it's starting to bug me.
Logged

Offline DHuffman

  • Enthusiast
  • **
  • Posts: 206
  • '77 CB750F
    • Follow me on instagram!
Re: Front end swap: shortening clutch cable?
« Reply #8 on: September 03, 2018, 07:09:58 AM »
Quote from: SDmtnbkr on September 02, 2018, 10:36:36 PM

What did you end up doing for your clutch cable? Even with the shortened Motion Pro mine is about 4in too long.... and it's starting to bug me.

I'm still using the R6 cable that I cut down with the "screw on" barrel swivel. I'll be able to see how well it works once I get my clutch fixed - I think the plates are stuck.
Logged
Pages: [1]   Go Up
« previous next »