Topic: CB350F with short CB400 bars

[poofdog]

I just switched out some custom cruiser bars on my cb350f to the short repro cb400 bars.   Perfect feel for what I want.  The only problem I have is there isn't enough room on the right side to have the front brake lever at the right plane....it hits the tach.  I would have to move the throttle out an inch or two to clear, then I would not be able to use my bar end mirrors.

Any Ideas?   I found out about the bar swap here on the forum.

[carnivorous chicken]

You can likely loosen the banjo bolt on the master cylinder and move that part out of the way with a little rotation.