« previous next »
Pages: [1]   Go Down

Author Topic: Then comes the cylinder head  (Read 3775 times)

0 Members and 1 Guest are viewing this topic.

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Then comes the cylinder head
« on: May 18, 2018, 03:14:33 PM »


APE has been selected as the engine components supplier for Custom bike builder Duane Ballard’s latest chopper built around the iconic Honda CB750 sohc. Ballard’s first Honda chopper was featured on the cover of Street Choppers Magazine.
This edition has an 836cc motor with Wiseco pistons and WebCam. APE Ultra Crankshaft assembly featuring Pro Street billet connecting rods.

This cylinder head is an APE big valve race ported package. APE is the only company building these race heads that also manufacturers all of the components they use.

This head features our stainless steel valves, originally developed for use in the RC Engine top fuel bikes being restored to run again. Bronze performance valve guides, performance valve springs and titanium valve spring retainers.
http://www.aperaceparts.com/cylinderheads.html
Logged

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Then comes the cylinder head
« Reply #1 on: May 18, 2018, 03:15:34 PM »
Logged

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
Re: Then comes the cylinder head
« Reply #2 on: May 18, 2018, 04:11:53 PM »
Then comes the drool  ;)
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,090
  • Sunny Central Florida
Re: Then comes the cylinder head
« Reply #3 on: May 18, 2018, 06:12:54 PM »
No fair! I deliberately avoid looking at these to prevent the spontaneous combustion of my credit card!  :o  ;)  ;D


Good stuff!  8)
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,101
  • CB750F Dragbike
Re: Then comes the cylinder head
« Reply #4 on: May 18, 2018, 11:39:07 PM »
Quote from: madmtnmotors on May 18, 2018, 06:12:54 PM
No fair! I deliberately avoid looking at these to prevent the spontaneous combustion of my credit card!  :o  ;)  ;D


Good stuff!  8)

Go ahead, pull the trigger. You know you want it brother. It'll go nicely with that bigger bottom end.
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,531
  • Bike almost back to the 70's 2015
Re: Then comes the cylinder head
« Reply #5 on: May 19, 2018, 01:09:55 AM »
The CB750 is well worth the parts! It's a correction of what Honda missed to do from the very beginning. An old head need to get the seats cut + some new valves + guides anyway.
Lightened alternator must be in the package too?
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
Re: Then comes the cylinder head
« Reply #6 on: May 19, 2018, 10:51:02 AM »
Frank, he'd be in the 11's before you know it......
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Then comes the cylinder head
« Reply #7 on: June 14, 2018, 02:47:21 PM »
Here is the finished product, less carbs and ignition.

Duane Ballards Honda CB750 enging for his new project. This bike will be in the Born Free motorcycle show next month. 836cc Wiseco pistons, Web Cams, APE lightened and race balance crankshaft fitted with APE Pro Street billet connecting rods. Full race APE cylinder head with Stainless valves, springs and titanium retainers.

Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Then comes the cylinder head
« Reply #8 on: June 14, 2018, 03:49:43 PM »
Yes Jay, It looks real blingy but nobody will be able to see all your goodies, hahaha.
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Then comes the cylinder head
« Reply #9 on: June 14, 2018, 03:54:21 PM »
I showed the crankshaft with the Prostreet billet rods and the cylinder head. What else did you want to see?
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Then comes the cylinder head
« Reply #10 on: June 14, 2018, 04:54:01 PM »
 Burnouts and wheelies.. lol..
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline innovativems

  • Expert
  • ****
  • Posts: 1,029
    • Innovative MotoSports
Re: Then comes the cylinder head
« Reply #11 on: June 14, 2018, 05:04:06 PM »
Amazing!!!


Sent from my iPhone using Tapatalk
Logged
2007 KTM 990 adv
2003 Honda RC51
2000 Yamaha YSR50
1978 Honda Express
1975 Honda CB400f
1974 Honda CB350f
1974 Kawi H2
1974 Honda CB550f
1971 Kawi h1
1973 Kawi h1
1974 gt 550
1974 gt550

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,902
  • Bought her new 4/75
Re: Then comes the cylinder head
« Reply #12 on: June 14, 2018, 06:39:46 PM »
Quote from: Big Jay on June 14, 2018, 03:54:21 PM
I showed the crankshaft with the Prostreet billet rods and the cylinder head. What else did you want to see?

Dyno print out  ;)
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,531
  • Bike almost back to the 70's 2015
Re: Then comes the cylinder head
« Reply #13 on: June 14, 2018, 09:11:22 PM »
Look really good on the outside as well as the inside! I guess 80+ rwhp
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Then comes the cylinder head
« Reply #14 on: June 15, 2018, 03:50:25 PM »
Logged

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Then comes the cylinder head
« Reply #15 on: June 22, 2018, 12:02:47 PM »
Logged

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,252
    • CBRzone
Re: Then comes the cylinder head
« Reply #16 on: June 27, 2018, 11:16:49 AM »
Won Best Japanese bike at the Prestigious Born Free motorcycle Show.
Logged

Offline PeWe

  • Really Old Timer ...
  • *******
  • Posts: 15,531
  • Bike almost back to the 70's 2015
Re: Then comes the cylinder head
« Reply #17 on: June 27, 2018, 01:01:27 PM »
Congratulations!
They knew that the engine look at least as good on the inside as the entire bikes outside, right? ;)
Logged
CB750 K6-76  970cc (Earlier 1005cc JMR Billet block on the shelf waiting for a comeback)
CB750 K2-75 Parts assembled to a stock K2

Updates of the CB750 K6 -1976
http://forums.sohc4.net/index.php/topic,180468.msg2092136.html#msg2092136
The billet block build thread
http://forums.sohc4.net/index.php/topic,49438.msg1863571.html#msg1863571
CB750 K2 -1975  build thread
http://forums.sohc4.net/index.php/topic,168243.msg1948381.html#msg1948381
K2 engine build thread. For a complete CB750 -75
http://forums.sohc4.net/index.php/topic,180088.msg2088008.html#msg2088008
Carb jetting, a long story Mikuni TMR32
http://forums.sohc4.net/index.php/topic,179479.msg2104967.html#msg2104967
Pages: [1]   Go Up
« previous next »