Topic: Dynoman contact

[Johnny340]

Does anyone know how to contact the folks at Dynoman regarding their Dyna S ignition?  I need a pickup magnet.  Their phone numbers are disconnected and the contact links on their website don't work.. 
Thanks in advance.

[PeWe]

No problem here
http://www.dynoman.net/contact.html
Tech questions: dynoman2@austin.rr.com
Maybe OK now or your laptop, smartphone?

[Johnny340]

No problem here
http://www.dynoman.net/contact.html
Tech questions: dynoman2@austin.rr.com
Maybe OK now or your laptop, smartphone?

Yup, switched devices and that link worked.  Thx!
They sent this contact:
http://dynaonline.com/contact/contact-us.aspx

Just talked to Larry who took care of me!

Btw, not to start a coil ohm debate thread but he said with his Dyna S ignition, he recommended the 5 ohm coils with all the Honda's less than 750.  The 750 charging system could handle the 3 ohm coils but I'm going to use 5 ohm anyway..

[PeWe]

My CB750's charging system was not happy with Dyna-S and 3 ohm coils. Battery drained rather quick. Not possible to have headlight on. I had bought the kit locally so I could go back and switch the 3 ohm coils to 5 ohms and no further problems. 
What's the meaning with 3 ohm coils?  Only when running plugs with larger gap?

I used Dyna wires which were no good, graphite core wire that had intermittent function on one cylinder and messed up the carb jetting for long time. Standard wires with NGK 5 kohm caps and NGK D8EA plugs runs fine. Denso X24ES-U is OK too.