« previous next »
Pages: [1]   Go Down

Author Topic: Replacing oil seals  (Read 680 times)

0 Members and 1 Guest are viewing this topic.

Offline AndyH

  • My religion:-
  • Hot Shot
  • ***
  • Posts: 269
  • Pretty well West of Everywhere in Aus!
Replacing oil seals
« on: June 21, 2018, 08:19:14 PM »
I'm preparing to replace the gearshift spindle and clutch pushrod oil seals on my CB500K1.
Can I just press them in "dry" or do I put some sealant around the outside of the oil seal.
If the latter, which sealant?  TIA
Logged
1971 CB750K1 (US import)
1972 CB500 Four K1 (SOLD)
Previously owned..
1967 Honda Sports 90
1971 Yamaha CT2 175
1973 Yamaha RD250
1975 Kawasaki KX125
1983 Yamaha XT250T
BMW R65
BMW R80
BMW R100LT

Offline uksparky

  • Hot Shot
  • ***
  • Posts: 450
  • Track days
Re: Replacing oil seals
« Reply #1 on: June 21, 2018, 10:25:12 PM »
Thoroughly clean the dirt off .... press em in dry they will be tight fit, that will seal.... no sealant
Logged
Present bike 1982 900C Custom

Offline AndyH

  • My religion:-
  • Hot Shot
  • ***
  • Posts: 269
  • Pretty well West of Everywhere in Aus!
Re: Replacing oil seals
« Reply #2 on: June 21, 2018, 11:18:40 PM »
Quote from: uksparky on June 21, 2018, 10:25:12 PM
Thoroughly clean the dirt off .... press em in dry they will be tight fit, that will seal.... no sealant


Thanks, have now "dry" pressed them in.
Logged
1971 CB750K1 (US import)
1972 CB500 Four K1 (SOLD)
Previously owned..
1967 Honda Sports 90
1971 Yamaha CT2 175
1973 Yamaha RD250
1975 Kawasaki KX125
1983 Yamaha XT250T
BMW R65
BMW R80
BMW R100LT
Pages: [1]   Go Up
« previous next »