« previous next »
Pages: [1]   Go Down

Author Topic: 450-500t front sprocket  (Read 1306 times)

0 Members and 1 Guest are viewing this topic.

Offline grumburg

  • Expert
  • ****
  • Posts: 944
  • 74550, 76400F, 72 750 67S90, 68CL90, 65 s65 66 x6
450-500t front sprocket
« on: January 13, 2007, 09:16:28 AM »
Hey, 450 guys. Removed left covers on the 500T project. Front sprocket has probably 1/4 inch of play on shaft and 1/8 inch of side play. Shaft does not seem worn. Bike has 8000 miles. No metal shavings in all the grease and dirt.  WTF?
Logged
Fonda Honda

Offline bill440cars

  • Feeling More & More,
  • Really Old Timer ...
  • *******
  • Posts: 12,358
  • Tryin' To Slow Down "Time"!
Re: 450-500t front sprocket
« Reply #1 on: January 13, 2007, 12:19:46 PM »


          They're not a snug fit but, I don't think they should be that loose. I've got a Clymer manual, I'll check and see it they have any specs on that. Have you ever been to cb450dohc.com? It's not as active as SOHC4 but, got info and lots of experience there.

                                                  Later on, Bill :) ;)
Logged
Member # 1969
PRAYERS ALWAYS FOR: Bre, Jeff & Virginia, Bear, Trevor & Brianna ( Close Friend's Daughter)
"Because HE lives, I can Face Tomorrow"                  
 You CAN Teach An Old Dog New Tricks, Just Takes A Little Bit Longer & A Lot More Patience!! 
             
Main Rides: '02 Durango, '71 Swinger & Dad's '93
                  Dakota LE 4x4 '66 CB77 & '72 SL350K2
Watch What You Step Into, It Could  End Up A Mess!
Pages: [1]   Go Up
« previous next »