« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: CB650 Custom Rust Bucket  (Read 11356 times)

0 Members and 1 Guest are viewing this topic.

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #50 on: January 10, 2019, 12:37:08 PM »
Practiced my welding with a custom cup holder up by the bars, what do you guys think?



Hah, yeah right.

Shined up some old shocks. Here’s a little before and after, this’ll do for now.


Needed room in my work space to finish up the engine so after freshening up and reassembling the forks I put some of the 650 together to roll out and stick under a cover. Check out the custom mono shock.

Oh I also picked up a tank. All I need now is some carburetors and I should have everything I need for a running bike.


Logged

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,041
  • I refuse...
Re: CB650 Custom Rust Bucket
« Reply #51 on: January 10, 2019, 12:55:07 PM »
Quote from: CarbonK on January 10, 2019, 12:37:08 PM
Practiced my welding with a custom cup holder up by the bars, what do you guys think?

I think you need to put down the welder, and pick up a grinder  :o

Should look more like this- no grinder needed.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB650 Custom Rust Bucket
« Reply #52 on: January 11, 2019, 08:04:23 AM »
Everyone is a comedian.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,041
  • I refuse...
Re: CB650 Custom Rust Bucket
« Reply #53 on: January 11, 2019, 09:35:03 AM »
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB650 Custom Rust Bucket
« Reply #54 on: January 11, 2019, 04:47:07 PM »
Quote from: calj737 on January 11, 2019, 09:35:03 AM
Quote from: SOHC4 Cafe Racer Fan on January 11, 2019, 08:04:23 AM
Everyone is a comedian.
Who’s joking?  8)

Carbonk -- see "custom cup holder" and "monoshock" above
 ;D
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #55 on: January 24, 2019, 01:02:21 PM »
It’s been a while but I’m still goin. Valves were lapped, cylinders were honed, new rings, all that jazz. Engine is painted and finally back in the frame with minimal scratching.




Polished up the cover a bit, I can really see myself riding this thing. ::)
 
I picked up a set of carbs from an early Ninja 600 after reading of others using it. Hopefully it’ll run well with stock motor, intake, and exhaust set up.
Logged

Offline kerryb

  • Not a very
  • Expert
  • ****
  • Posts: 1,150
  • 78 750k 74 cb550k, '83GL1100 FXSTC, 1979 Wilmac
Re: CB650 Custom Rust Bucket
« Reply #56 on: January 24, 2019, 02:46:29 PM »
It's lookin' real good now!  Keep at it and you'll be riding it when the weather breaks.
  (says he who is expecting a foot of snow tonight!)
Logged
intrigued by the wail...seduced by the scream.

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: CB650 Custom Rust Bucket
« Reply #57 on: January 24, 2019, 04:00:07 PM »
Can you confirm that the spacing is the same for the Ninja carbs and the ‘82 650? I’ve heard people say they fit but haven’t seen or or heard it confirmed by someone who actually has them. What model carbs? There a number stamped on them?
Logged

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #58 on: January 24, 2019, 05:44:56 PM »
I actually have 2 sets of carbs from early ninja 600s, one for parts. One is stamped V154 YF20 and the other is V153 YI20. Both look the same, could be a difference in the jet sizes, not sure yet.

Here is one of them next to the VB44A carbs off the 1981 CB650C (Ninja carbs on left)




Logged

Offline Gurp

  • I'm no.......
  • Master
  • *****
  • Posts: 2,084
  • Once was a...
Re: CB650 Custom Rust Bucket
« Reply #59 on: January 24, 2019, 06:43:56 PM »
Those should fit. Just jetting and tuning now!
Logged
slow Progress 74 cb550.

Poor boy chop 73 CB500 chop

Future project 77 Cb750 Amen Savior

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: CB650 Custom Rust Bucket
« Reply #60 on: January 25, 2019, 09:23:25 AM »
Nice, perfect post. I know you will, but be sure to post back what jets you go with. Plan on doing an actual dyno tune or butt dyno tune?
Logged

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #61 on: January 27, 2019, 12:51:55 PM »
Quote from: DaveBarbier on January 25, 2019, 09:23:25 AM
Nice, perfect post. I know you will, but be sure to post back what jets you go with. Plan on doing an actual dyno tune or butt dyno tune?

Probably gonna butt dyno this bad boy because I’m cheap but I’m reading into wideband o2 sensors, that would be interesting to try out.
Logged

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #62 on: February 06, 2019, 04:56:58 PM »
Had some grime on my kickstand lever and exhaust flanges so I brought out the big guns. A 17 year old can of oven cleaner. The older it is the better it works, right?


Came out vomit green


Turned brown, looks tasty.

Was also able to polish out some deep gouges on the stator cover.


Before


After, used a die grinder with some sanding and scotch brite discs

Currently working on shortening the wiring harness about a foot to relocate the block connectors that were in the headlight bucket to under the tank. My new headlight has no room to fit anything inside.

Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB650 Custom Rust Bucket
« Reply #63 on: February 07, 2019, 11:23:17 AM »
That Easy Off oven cleaner looks like my cat's vomit!! I hope it works -- the cleaner (not the vomit)!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #64 on: February 12, 2019, 05:49:20 PM »
Managed to relocate all the headlight bucket connectors under the gas tank




No fitting issues, nice. I’m planning on moving the ignition switch to where they’re  located on the early CB’s, under the tank.


Hooked up some front turn signals and a couple of handlebar controls I had laying around. Gotta get started and finish the front fender and brake to call the front end done.


A delivery? For me?


Wow, thanks USPS. It was a crankcase cover gasket, luckily it wasn’t bent too bad.


I was digging around a crate of parts that came off the 650 and found this. A spacer of some sort. Anyone know what it is or where it goes?
Logged

Offline Gurp

  • I'm no.......
  • Master
  • *****
  • Posts: 2,084
  • Once was a...
Re: CB650 Custom Rust Bucket
« Reply #65 on: February 12, 2019, 07:45:53 PM »
Looks like a rear axle spacer.
Logged
slow Progress 74 cb550.

Poor boy chop 73 CB500 chop

Future project 77 Cb750 Amen Savior

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: CB650 Custom Rust Bucket
« Reply #66 on: February 13, 2019, 05:31:13 AM »
Could be, but it looks aluminum. Might be the oil filter spacer.

Last post are the measurements.
http://forums.sohc4.net/index.php?topic=171656.0
Logged

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #67 on: February 13, 2019, 07:06:20 AM »
Quote from: DaveBarbier on February 13, 2019, 05:31:13 AM
Could be, but it looks aluminum. Might be the oil filter spacer.

Last post are the measurements.
http://forums.sohc4.net/index.php?topic=171656.0

Yeah that would explain why it was a bit oily. Put a new filter and some oil in the engine a couple of days ago, don’t know how I forgot this, thanks!
Logged

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #68 on: February 13, 2019, 03:09:19 PM »
Another quick dumb question.


Does the exhaust hanger bracket fit in front of the passenger peg mount like so? Or behind?
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB650 Custom Rust Bucket
« Reply #69 on: February 13, 2019, 03:30:27 PM »
It appears to be fine in front of it. I suppose you could bend it (gently) to mount behind it.
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline calj737

  • Really Old Timer ...
  • *******
  • Posts: 21,041
  • I refuse...
Re: CB650 Custom Rust Bucket
« Reply #70 on: February 13, 2019, 04:09:28 PM »
If I’m not mistaken, flip the bracket and it will mount behind.
Logged
'74 550 Build http://forums.sohc4.net/index.php?topic=126401.0
'73 500 Build http://forums.sohc4.net/index.php?topic=132935.0

"Of all tyrannies, a tyranny sincerely exercised for the good of it's victim may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated, but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience." - C.S. Lewis

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: CB650 Custom Rust Bucket
« Reply #71 on: February 13, 2019, 06:51:10 PM »
Mine mounted behind.

Logged

Offline DaveBarbier

  • Really Old Timer ...
  • *******
  • Posts: 5,620
Re: CB650 Custom Rust Bucket
« Reply #72 on: February 14, 2019, 02:14:43 AM »
And you may need to use that bracket on the right side pair. I seem to remember there’s a locating pin so you can’t just flip the bracket. But I only checked out my 650’s exhaust for about 20 minutes and then trashed it during the tear down process.
Logged

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: CB650 Custom Rust Bucket
« Reply #73 on: February 14, 2019, 10:46:00 AM »
Duh. I didn't realize the close up shot was of stock pipes!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline CarbonK

  • Enthusiast
  • **
  • Posts: 136
Re: CB650 Custom Rust Bucket
« Reply #74 on: February 15, 2019, 11:06:04 AM »
Thanks for all the insight guys, very helpful.

On another note, I burned out my 1 week old $9 starter solenoid. I guess you get what you pay for.
Logged
Pages: 1 2 [3] 4   Go Up
« previous next »