« previous next »
Pages: [1]   Go Down

Author Topic: Can I reuse these gaskets?  (Read 2769 times)

0 Members and 1 Guest are viewing this topic.

Offline Random1111

  • Full Member
  • *
  • Posts: 2
Can I reuse these gaskets?
« on: August 13, 2018, 08:50:22 PM »
I would rather not have to buy carb kits.
Logged

Offline RAFster122s

  • I feel like a really really
  • Really Old Timer ...
  • *******
  • Posts: 12,419
  • SOHC4 member # 2605
Re: Can I reuse these gaskets?
« Reply #1 on: August 13, 2018, 09:19:05 PM »
Is that a zinc oxidation?

I'm sure someone out there would reuse them. You should sell them on eBay. Where else can you find patina like that?!
Logged
David- back in the desert SW!

Offline spotty

  • Master
  • *****
  • Posts: 1,942
  • cb750....for when a Vmax is just too much bike
    • spottys world of vmaxes and great danes
Re: Can I reuse these gaskets?
« Reply #2 on: August 13, 2018, 11:10:43 PM »
a soak in simple green, hose them out and a good blast with an air line and they'll be fit for the bin
Logged
i blame Terry

Offline carnivorous chicken

  • Master
  • *****
  • Posts: 1,877
Re: Can I reuse these gaskets?
« Reply #3 on: August 14, 2018, 06:54:34 AM »
Just run 'em as is, they look good to go to me.
Logged

Offline madmtnmotors

  • When did I get to be a
  • Really Old Timer ...
  • *******
  • Posts: 6,110
  • Sunny Central Florida
Re: Can I reuse these gaskets?
« Reply #4 on: August 14, 2018, 09:38:37 AM »
"Professionally rebuilt"   ;)

I just threw up in my mouth a little...  :o
Logged
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,433
  • Dr. Bovinestein iBa#80333
Re: Can I reuse these gaskets?
« Reply #5 on: August 23, 2018, 10:57:42 AM »
Must've been owned by a navy shipyard worker.  Went overboard when told to "mothball" the vessel.
Logged

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,385
  • Central Texas
Re: Can I reuse these gaskets?
« Reply #6 on: August 23, 2018, 03:23:37 PM »
Wow...that has to be some sort of record...
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline 74cb750

  • Old Timer
  • ******
  • Posts: 3,420
    • old japanese parts and bikes
Re: Can I reuse these gaskets?
« Reply #7 on: August 30, 2018, 02:28:42 AM »
send them to me,
I'll throw them in my Ultrasonic cleaner and I bet they'll be good w/a couple of hours cleaning & new
gaskets, needles etc etc. Probably looking at $30+ / carb for parts.

I have cleaned carbs that had 1/4-1/2 inch of varnish in them, all passages blocked, etc.

michel

http://www185.pair.com/canukvt/odd/carbs/

look at the pictures 2(x).jpg for an example (I have 1.5 hours into it)
Logged
Laugh at least once a day.
Life  $ucks, then you die.
You are entitled to your own opinions, but not your own facts.
God forces us to live with  non-believers to test our resolve.

Offline Robbo

  • Hot Shot
  • ***
  • Posts: 273
Can I reuse these gaskets?
« Reply #8 on: August 30, 2018, 04:27:44 AM »

That’s a strange place to hide the cocaine...


Sent from my iPhone using Tapatalk
Logged
1973 CB350 Four, 1975 CB550K

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: Can I reuse these gaskets?
« Reply #9 on: August 30, 2018, 09:02:17 AM »
Do remember, things GO better with coke.

Cheers,
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline brewsky

  • Expert
  • ****
  • Posts: 1,110
Re: Can I reuse these gaskets?
« Reply #10 on: September 02, 2018, 05:05:44 AM »
Wonder if they caught it from my oil pump?....
« Last Edit: September 02, 2018, 05:07:51 AM by brewsky »
Logged
66 CA77
78 550K
78 CB750K
02 FZ1
09 GL 1800

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,883
    • http://forums.sohc4.net/index.php?PHPSESSID=gq68mjd60esoijb27mmfasilq3&/topic,60973.0.html
Re: Can I reuse these gaskets?
« Reply #11 on: September 02, 2018, 01:02:06 PM »
no leaking on that pump...
Logged
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline brewsky

  • Expert
  • ****
  • Posts: 1,110
Re: Can I reuse these gaskets?
« Reply #12 on: September 05, 2018, 01:39:09 AM »
Quote from: strynboen on September 02, 2018, 01:02:06 PM
no leaking on that pump...
If that's the cure, maybe I should spread some of it all over the top end :P
Logged
66 CA77
78 550K
78 CB750K
02 FZ1
09 GL 1800

Offline strynboen

  • Old Timer
  • ******
  • Posts: 4,883
    • http://forums.sohc4.net/index.php?PHPSESSID=gq68mjd60esoijb27mmfasilq3&/topic,60973.0.html
Re: Can I reuse these gaskets?
« Reply #13 on: September 05, 2018, 07:22:01 AM »
just fill the powder dust in the oil fill..and it vill seal up.. 8)
Logged
i kan not speak english/but trying!!
http://forums.sohc4.net/index.php?topic=60973.0
http://forums.sohc4.net/index.php?topic=144758.0
i hate all this v-w.... vords

Offline BomberMann650

  • Holy Cow! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 6,433
  • Dr. Bovinestein iBa#80333
Re: Can I reuse these gaskets?
« Reply #14 on: September 10, 2018, 02:58:38 AM »
Quote from: TwoTired on August 30, 2018, 09:02:17 AM
Do remember, things GO better with coke.

Cheers,

This sales ad
Logged
Pages: [1]   Go Up
« previous next »