Author Topic: Enthusiastic drill owner spotted (Read 2058 times)

Tim2005 · « **on:** September 10, 2018, 12:26:10 PM »

Just wondering if anyone has seen anything that's been drilled more than this disc that I spotted for sale ...

754 · « **Reply #1 on:** September 10, 2018, 12:32:02 PM »

He does not have the chamfering quite figured out yet. .
If you have trouble with that, usually too fast, i used a brace and chamfer tool and did them by hand.

A very long time ago a few folks did them like this at the drags with disastrous results (overdrilled) for a time they had either approved drilling patterns or a few select shops that would do them...

jgger · « **Reply #2 on:** September 10, 2018, 07:33:33 PM »

Looks like someone got a new drill press for their birthday!

BomberMann650 · « **Reply #3 on:** September 10, 2018, 11:03:39 PM »

It will still stop....doors.

flybox1 · « **Reply #4 on:** September 11, 2018, 10:21:04 AM »

...and boats

spotty · « **Reply #5 on:** September 11, 2018, 06:58:55 PM »

probably light enuf to use as a lethal frisbee now

dave500 · « **Reply #6 on:** September 12, 2018, 12:29:46 AM »

it doubles as a mince meat disc.

Remcod · « **Reply #7 on:** September 12, 2018, 01:53:56 AM »

Pencil organiser

calj737 · « **Reply #8 on:** September 12, 2018, 03:43:40 AM »

Quote from: Remcod on September 12, 2018, 01:53:56 AM

~~Pencil~~ Crayon organiser

FTFY

J-Rod10 · « **Reply #9 on:** September 12, 2018, 07:16:27 AM »

Is that a Carpy rotor?

70CB750 · « **Reply #10 on:** September 12, 2018, 07:49:22 AM »

Exhaust baffle maybe?

Tim2005 · « **Reply #11 on:** September 12, 2018, 11:07:45 AM »

All good ideas. Would anyone like to guess what , er, low performance bike it was from?

dave500 · « **Reply #12 on:** September 12, 2018, 11:52:23 AM »

throw it in the air and take a photo,make a good fake ufo shot.

BomberMann650 · « **Reply #13 on:** September 13, 2018, 03:51:46 PM »

Quote from: calj737 on September 12, 2018, 03:43:40 AM

Quote from: Remcod on September 12, 2018, 01:53:56 AM
~~Pencil~~ Crayon organiser
~~FTFY~~ Marine Corps chow hall tray

FtFTFY

MoMo · « **Reply #14 on:** September 13, 2018, 05:35:39 PM »

Quote from: Tim2005 on September 12, 2018, 11:07:45 AM

All good ideas. Would anyone like to guess what , er, low performance bike it was from?

From the Wilde One's ultra fast CB350 four?....Larry

754 · « **Reply #15 on:** September 13, 2018, 05:40:29 PM »

Yamaha ?

dave500 · « **Reply #16 on:** September 14, 2018, 01:03:43 AM »

when it spins at a certain speed it creates a whistle only wildlife can hear?

Tim2005 · « **Reply #17 on:** September 14, 2018, 02:57:27 PM »

Yes Frank, a Yamaha. Good spot. Now what's the last Yamaha model that you'd want to ride with a brake like that?!

754 · « **Reply #18 on:** September 14, 2018, 04:20:24 PM »

TZ 700 or TZ750..

Tim2005 · « **Reply #19 on:** September 15, 2018, 01:29:00 AM »

Yes, spot on again, TZ750. They were brave as well as enthusiastic

MoMo · « **Reply #20 on:** September 15, 2018, 05:54:23 AM »

Quote from: Tim2005 on September 15, 2018, 01:29:00 AM

Yes, spot on again, TZ750. They were brave as well as enthusiastic

Foolish? $:-\$

Yamahawk · « **Reply #21 on:** September 21, 2018, 08:45:22 AM »

Quote from: Tim2005 on September 15, 2018, 01:29:00 AM

Yes, spot on again, TZ750. They were brave as well as enthusiastic

WOW!
I would think it came off of a flat tracker, as they don't use brakes anyway.. Didn't Kenny Roberts campaign a TZ750 as a flattracker? Could have been the rotor he used lol...
Charlie

News:

Author Topic: Enthusiastic drill owner spotted (Read 2058 times)