Author Topic: new rings for 900 MTC pistons  (Read 168 times)

0 Members and 1 Guest are viewing this topic.

Offline topgun

  • Full Member
  • *
  • Posts: 41
new rings for 900 MTC pistons
« on: September 18, 2018, 12:58:17 am »
Hi Guys, I was hoping someone could help me out with some information on replacing the rings on my MTC900 pistons bore size is 67 mm I believe CB360 twins have 67 mm bore has anyone used these and or is there any other options out there without going bigger Cheers

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 9,571
  • Big ideas....
Re: new rings for 900 MTC pistons
« Reply #1 on: September 18, 2018, 03:37:13 am »
Measure and call Total Seal
Owner of the "Million Dollar CB"

Offline topgun

  • Full Member
  • *
  • Posts: 41
Re: new rings for 900 MTC pistons
« Reply #2 on: September 18, 2018, 10:51:55 am »
Thanks for your info Cheers

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,250
    • CBRzone
Re: new rings for 900 MTC pistons
« Reply #3 on: December 15, 2018, 12:28:56 pm »
If pistons are old enough, CB360 twin should work.

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 13,471
  • Bought her new 4/75
Re: new rings for 900 MTC pistons
« Reply #4 on: December 15, 2018, 03:24:07 pm »
What are the thicknesses of the rings?

I have Total Seal part numbers for the Henry Abe 67mm kit.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Big Jay

  • Expert
  • ****
  • Posts: 1,250
    • CBRzone
Re: new rings for 900 MTC pistons
« Reply #5 on: December 15, 2018, 03:43:42 pm »
Probably 1.5 / 1.5 /2.5

 

;
Honda