Author Topic: The South Side Dive Bar (Read 3094126 times)

Skonnie Boy · « **Reply #14575 on:** June 12, 2009, 07:52:54 AM »

Quote from: Industrial Cafe on June 12, 2009, 07:30:36 AM

Quote from: goon 1492 on June 12, 2009, 07:18:24 AM
Posers!
90210.....
I figured that's the official title. with their big platinum watches, and gelled up hair.

I believe the term for clothing with intentional holes and such is "pre-distressed". I prefer to distress clothes, people, beercans myself.

If the holes don't come from wrenching or wrassling, you are fail.

Duke McDukiedook · « **Reply #14576 on:** June 12, 2009, 07:53:43 AM »

Quote from: Industrial Cafe on June 12, 2009, 07:30:36 AM

Quote from: goon 1492 on June 12, 2009, 07:18:24 AM
Posers!
90210.....
I figured that's the official title. with their big platinum watches, and gelled up hair.

Who cares? Hardbodies with douches?

Excuse me, I... have to return some videotapes.

Inkscars · « **Reply #14577 on:** June 12, 2009, 08:02:37 AM »

Feed me a stray cat.

They are fakes. That's the title.
Yea it has the chrome. I can "scuff" it. I just wanted the chrome like OFF, off...... I really have no idea how I'm gonna roll a new edge on the fender after I cut it...

Duke McDukiedook · « **Reply #14578 on:** June 12, 2009, 08:06:16 AM »

Plastic, they look like Jersey trash.

Duke McDukiedook · « **Reply #14579 on:** June 12, 2009, 08:56:07 AM »

Jersey, Florida, is there much diference except for the temp?

Duke McDukiedook · « **Reply #14580 on:** June 12, 2009, 09:02:03 AM »

Oh my, my oh my...

I think I might have to take off early from work.

I'm about to have a beach blanket moment...

goon 1492 · « **Reply #14581 on:** June 12, 2009, 09:18:28 AM »

Ink since your painting the fender maybe you can reuse the bobbed part after its cut ott, just trim the fender enough to add the cutoff lip back back(overlap the metal for extra strength instead of a butt weld) on and still be able to give it that bobbed look, a little putty for the seams and volia.
Don't use bondo though I will get the name of the flexible stuff we use here its super badd, bondo will work until you get a good rock that comes up and hits it from the under side you will be like

ON that note you might as well get some of that rubberized undercoat and hit the under side of the fender when its all done and ready for assembly and give the rocks and debris a bumper pad before the stuff hits metal and gives you an invereted dimple.
Did I explain that right

Frankenkit · « **Reply #14582 on:** June 12, 2009, 09:22:31 AM »

...isn't an inverted dimple a pimple?

Frankenkit · « **Reply #14583 on:** June 12, 2009, 09:28:00 AM »

...yeah, I'd discourage fender nipples, too.

Inkscars · « **Reply #14584 on:** June 12, 2009, 09:30:19 AM »

Ugh. I'm gonna need help with this one.

Frankenkit · « **Reply #14585 on:** June 12, 2009, 09:41:28 AM »

I really try not to go over my handlebars and suck fender, on ANY ride.

goon 1492 · « **Reply #14586 on:** June 12, 2009, 09:49:48 AM »

purpel nurple

Dook can I dry hump those for a bit before you install them?

Ink I wanted to keep the rolled edge on my front fender when I bobbed it but most of mine is gonna stay chrome with a tribal stripe in the middle and pinstriped with some red paint that will match my caliper paint so no lip for me, that is why I bobbed the front and back of it so it would match, I have also seen several old HD's that had this treatment and after you get past missing the continuous rolled edge the withdraw effect goes away...
The big piece came off the front and the little one came off the back, I did keep these just in case I find something to do with them later.

Caaveman82 · « **Reply #14587 on:** June 12, 2009, 10:16:58 AM »

[img width= height=]http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs086.snc1/4606_90030354884_43270244884_1787608_1232008_n.jpg[/img]

Frankenkit · « **Reply #14588 on:** June 12, 2009, 10:21:08 AM »

that is SO awesome...

Caaveman82 · « **Reply #14589 on:** June 12, 2009, 10:26:54 AM »

Quote from: Kit on June 12, 2009, 10:21:08 AM

that is SO awesome...

Yeah that pretty much does it for me too haha.

Caaveman82 · « **Reply #14590 on:** June 12, 2009, 10:32:15 AM »

This is the font style I am thinking about for my tank and side cover badges.

Thoughts?

Caaveman82 · « **Reply #14591 on:** June 12, 2009, 10:36:44 AM »

Not really into this type of music but this video is really damn cool.

Frankenkit · « **Reply #14592 on:** June 12, 2009, 10:41:01 AM »

Hi Marti!!!

Duke McDukiedook · « **Reply #14593 on:** June 12, 2009, 10:41:39 AM »

Marti!

Inkscars · « **Reply #14594 on:** June 12, 2009, 10:55:27 AM »

Quit being a turd and speak marti

martino1972 · « **Reply #14595 on:** June 12, 2009, 11:06:32 AM »

speaking hurts.....killer hang over...........that's the last time I join girls with their girlie shooters....

Duke McDukiedook · « **Reply #14596 on:** June 12, 2009, 11:09:26 AM »

What's a girlie shooter?

Some new Canuckistanian WMD?

Caaveman82 · « **Reply #14597 on:** June 12, 2009, 11:12:50 AM »

Quote from: Dukiedook on June 12, 2009, 11:09:26 AM

WMD?

Weiner Mild Dirreah

Inkscars · « **Reply #14598 on:** June 12, 2009, 11:16:17 AM »

Without Menstrual Distress?

Duke McDukiedook · « **Reply #14599 on:** June 12, 2009, 11:18:21 AM »

Wilbur's Massive Dong

News:

Author Topic: The South Side Dive Bar (Read 3094126 times)