Author Topic: The South Side Dive Bar (Read 3094521 times)

Roach Carver · « **Reply #22675 on:** January 04, 2010, 05:28:13 PM »

Quote from: Industrial Cafe on January 03, 2010, 08:43:47 PM

Quote from: retro rocket on January 03, 2010, 08:29:37 PM
Quote from: Industrial Cafe on January 03, 2010, 08:21:52 PM
well! I've sold almost my whole front end. only 3 small pieces left.

I'm so close to doing a thread on swapping a gsxr1000 front end to a cb750 it's scary.
Hi IC, i have the GSXR 1100 front end on mine and all i had done was the honda steering stem pressed into the Suzuki clamps and it all bolted straight up....The Honda stem was the same diameter as the Suzi one.

Mick
I know dude I think you show'd me pics of that.

look what I've done so far- and I didn't even bite into the pin surface!!

you actually can grind the weld off the lower. and then press out the neck. that way the lower is still useable. seems your way works too.

Frankenkit · « **Reply #22676 on:** January 04, 2010, 05:31:10 PM »

Quote from: 333 on January 04, 2010, 05:12:41 PM

Quote from: Zaipai on January 04, 2010, 04:54:12 PM
Quote from: Kit on January 04, 2010, 11:19:53 AM
good head is hard to find.
Not if you know where to go! And would Kit really know about this?

I don't think "head" is gender specific. But let me guess. You're one of those that don't give, but love to receive.

I would say 'no, not gender specific' there... As long as a head is still involved somewhere, it's still aptly named.

seaweb11 · « **Reply #22677 on:** January 04, 2010, 05:35:51 PM »

I'm getting so tired of seeing the photos of that mess stuck in a vice !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Tree nuts in a vice would be preferred about now.

b82ta · « **Reply #22678 on:** January 04, 2010, 05:38:58 PM »

Thanks for the advice IC and sorry to all those in here for ruining the great bar atmosphere and distracting those tree nuts

Frankenkit · « **Reply #22679 on:** January 04, 2010, 05:40:03 PM »

Aww, I liked seeing a useful conversation for once...

Industrial Cafe · « **Reply #22680 on:** January 04, 2010, 05:52:51 PM »

Quote from: 71cb750 on January 04, 2010, 05:28:13 PM

you actually can grind the weld off the lower. and then press out the neck. that way the lower is still useable. seems your way works too.

I ground off the weld till I saw the split between the tube and casting, then cut 2 lines down the casting and knocked them out with a punch.

I don't have a 20 ton press at home.

Zaipai · « **Reply #22681 on:** January 04, 2010, 05:53:40 PM »

Quote from: Industrial Cafe on January 04, 2010, 05:26:42 PM

I want this car so bad it hurts!!!!

Wow that is one awesome ride.. Is it 6 wheel drive per chance?

Industrial Cafe · « **Reply #22682 on:** January 04, 2010, 06:14:49 PM »

I don't know, it's from the league of extraordinary gentlemen. and it's amazing.

Frankenkit · « **Reply #22683 on:** January 04, 2010, 07:30:17 PM »

two of the wheels could just be not attached to the actual drive train...

b82ta · « **Reply #22684 on:** January 04, 2010, 07:32:36 PM »

for some reason I think there was a show that talked about making that car, maybe it was in the special features on the disk? Not sure but I know they did have at least one fullsize drivable version.

333 · « **Reply #22685 on:** January 04, 2010, 07:33:31 PM »

Quote from: Kit on January 04, 2010, 07:30:17 PM

two of the wheels could just be FAKE!

Fixed that for ya, Kit.

Frankenkit · « **Reply #22686 on:** January 04, 2010, 07:35:27 PM »

Quote from: 333 on January 04, 2010, 07:33:31 PM

Quote from: Kit on January 04, 2010, 07:30:17 PM
two of the wheels could just be FAKE!

#$%*ed that for ya, Kit.

Thanks.

Industrial Cafe · « **Reply #22687 on:** January 04, 2010, 09:04:23 PM »

it was 4 wheel steering and rear wheel drive you buncha doofs.

the 2 fronts turned more than the two center wheels, so it wouldn't be skidding around.

looks stupid with those truck tires under it.

Industrial Cafe · « **Reply #22688 on:** January 04, 2010, 09:13:40 PM »

Industrial Cafe · « **Reply #22689 on:** January 04, 2010, 09:15:47 PM »

Duke McDukiedook · « **Reply #22690 on:** January 05, 2010, 03:56:39 AM »

911.

Don't let any evil-doers burn their britches around you...

Industrial Cafe · « **Reply #22691 on:** January 05, 2010, 09:33:01 AM »

Duke McDukiedook · « **Reply #22692 on:** January 05, 2010, 11:39:04 AM »

Page 911.

MickeyX · « **Reply #22693 on:** January 05, 2010, 11:52:05 AM »

Industrial Cafe · « **Reply #22694 on:** January 05, 2010, 01:01:56 PM »

hello!

Duke McDukiedook · « **Reply #22695 on:** January 05, 2010, 05:05:31 PM »

BlindJoe · « **Reply #22696 on:** January 05, 2010, 05:33:04 PM »

damb im dumn

Industrial Cafe · « **Reply #22697 on:** January 05, 2010, 05:47:32 PM »

piddle paddle puddle poo, set yourself on fire and let me know how it goes.

333 · « **Reply #22698 on:** January 05, 2010, 07:43:18 PM »

How about we play a game of hide and go #$%* yourself?

vanillagorilla · « **Reply #22699 on:** January 05, 2010, 07:46:48 PM »

Quote from: 333 on January 05, 2010, 07:43:18 PM

How about we play a game of hide and go #$%* yourself?

You first

News:

Author Topic: The South Side Dive Bar (Read 3094521 times)