Author Topic: The South Side Dive Bar (Read 3177444 times)

the technological J · « **Reply #24450 on:** February 25, 2010, 08:37:34 AM »

if freaking left a set of carbs for a yamaha maxim im working on at a local small bike shop for the guy to clean with his ultra sound machine..... i did this in oct.... he went and rebuilt them new floats, valves, jets, gaskets and is charging me 250..... when i dropped them off i said i needed to keep things under a hundred dollars of course he doesnt remember that...... and the worst part is hes was better priced than anywhere around.........augh.. just venting

Frankenkit · « **Reply #24451 on:** February 25, 2010, 08:44:59 AM »

shoulda cleaned 'em yourself, man.

the technological J · « **Reply #24452 on:** February 25, 2010, 08:50:27 AM »

Quote from: Kit on February 25, 2010, 08:44:59 AM

shoulda cleaned 'em yourself, man.

i did these were the carbs from hell... he said all these things needed replaced.. i trust that they did i just wished he would have kept me on board

Frankenkit · « **Reply #24453 on:** February 25, 2010, 09:00:48 AM »

ughhh well, that's kinda how it goes. The 650 carbs can cost about $200 in just parts to rebuild. Air cutoff valves go and they're $10-$15 each, gasket sets are $30-$40 each... accelerator pump... I think that was $15 or $20...

mrblasty · « **Reply #24454 on:** February 25, 2010, 11:44:04 AM »

Quote from: thegabrielj on February 25, 2010, 08:37:34 AM

if freaking left a set of carbs for a yamaha maxim im working on at a local small bike shop for the guy to clean with his ultra sound machine..... i did this in oct.... he went and rebuilt them new floats, valves, jets, gaskets and is charging me 250..... when i dropped them off i said i needed to keep things under a hundred dollars of course he doesnt remember that...... and the worst part is hes was better priced than anywhere around.........augh.. just venting

that price sounds reasonable considering all the parts that were replaced.

Industrial Cafe · « **Reply #24455 on:** February 25, 2010, 12:04:08 PM »

don't #$%* man, he coulda just sold them out from under you and denied you even came in...

you're rich anyways, so what's it matter?

the technological J · « **Reply #24456 on:** February 25, 2010, 01:47:11 PM »

Quote from: Industrial Cafe on February 25, 2010, 12:04:08 PM

don't #$%* man, he coulda just sold them out from under you and denied you even came in...

you're rich anyways, so what's it matter?

yeah living it up in the trailer park........ saxony estates.... high class

Industrial Cafe · « **Reply #24457 on:** February 25, 2010, 02:13:40 PM »

stop bragging doctor moneybags.

the technological J · « **Reply #24458 on:** February 25, 2010, 02:21:18 PM »

Quote from: Industrial Cafe on February 25, 2010, 02:13:40 PM

stop bragging doctor moneybags.

when i told u i was the doctor of love it was because i was hitting on u.... i lied ok i lied...... i have holes in my pants... there you happy......my bum is out for all the world to see... my hairy hairy bum..... jerks

Industrial Cafe · « **Reply #24459 on:** February 25, 2010, 02:26:15 PM »

Industrial Cafe · « **Reply #24460 on:** February 25, 2010, 05:05:53 PM »

pimpin my #$%* all over the forum.
not really, I just want to show it to you guys, in case you dont go to that other thread...

Frankenkit · « **Reply #24461 on:** February 25, 2010, 05:24:42 PM »

That looks #$%*ing hot.

would riding in the rain with those drilled like that add to the possibility of the drums getting wet and not doing their thang right? just wondering because I might want to do that to my 350...

Retro Rocket · « **Reply #24462 on:** February 25, 2010, 05:43:14 PM »

Quote from: Industrial Cafe on February 25, 2010, 05:05:53 PM

pimpin my #$%* all over the forum.
not really, I just want to show it to you guys, in case you dont go to that other thread...

Is it possible to put a drain hole at the bottom somewhere so if water does get in it has somewhere to drain out.?

Mick

Industrial Cafe · « **Reply #24463 on:** February 25, 2010, 05:50:01 PM »

I've already modified the drain slots and drilled holes at the bottom so the wind going by the cover creates a better way out.

also I don't do alot of rain riding.

if anyone wants me to drill a cool pattern in their #$%* just pay actual shipping both ways and I'll do it for free.

the technological J · « **Reply #24464 on:** February 25, 2010, 06:17:15 PM »

what did u use to get those holes so big?

Industrial Cafe · « **Reply #24465 on:** February 25, 2010, 06:29:26 PM »

a 15/16 carbide drill bit and a round sided finishing file to make them come out round.
(that big of a bit makes a wonky hole)

the technological J · « **Reply #24466 on:** February 25, 2010, 07:14:41 PM »

how easy would it be to make on of these? it seems like it wouldnt be too bad
http://www.lachoprods.com/isell3/product_LAIT.php

Frankencake · « **Reply #24467 on:** February 25, 2010, 07:28:39 PM »

Quote from: Industrial Cafe on February 25, 2010, 05:50:01 PM

if anyone wants me to drill a cool pattern in their #$%* just pay actual shipping both ways and I'll do it for free.

Boop boop boop boop boop <sound of a semi backing in to your place>

Industrial Cafe · « **Reply #24468 on:** February 25, 2010, 08:00:12 PM »

HA! sounds like a fun weekend for me.

Grnrngr · « **Reply #24469 on:** February 26, 2010, 12:35:44 AM »

Quote from: Industrial Cafe on February 25, 2010, 05:05:53 PM

Sure is pretty....them little holes in the brake pad kinda look like little eyes peekin outta the big holes...heh..went skiing and pulled a muscle, took a couple pills....might be TUI...

333 · « **Reply #24470 on:** February 26, 2010, 05:55:06 AM »

I would still be concerned about rain gettin' in there, even if it has a route out. The water still reduces braking.

Industrial Cafe · « **Reply #24471 on:** February 26, 2010, 07:17:10 AM »

I'll let you know if it's an issue once I get it on the road.

I've gotten caught in the rain plenty of times with this cover and didn't have a problem,

...granted, the holes are smaller but there's a #$%*load of them.

Spikeybike · « **Reply #24472 on:** February 26, 2010, 08:09:58 AM »

IIIIIIIIIIIIIIIIIII'M BAAAAAAAAAAAAACK

Industrial Cafe · « **Reply #24473 on:** February 26, 2010, 08:11:35 AM »

SPIKAYYYYY!!!!

Spikeybike · « **Reply #24474 on:** February 26, 2010, 08:13:21 AM »

sweet glorious internet ... how i've missed you

News:

Author Topic: The South Side Dive Bar (Read 3177444 times)