Author Topic: Getting back on the road - small parts question  (Read 1210 times)

0 Members and 1 Guest are viewing this topic.

Offline Hutch

  • Enthusiast
  • **
  • Posts: 101
  • 1982 CB650SC
Getting back on the road - small parts question
« on: September 24, 2018, 04:34:46 PM »
I'm finally in the home stretch of getting my 1982 CB650SC back on the road.  I'm missing the following parts, and they appear to be unavailable online.  Can anyone provide a recommendation for a source, or alternate/cross-referenced part number?

Clutch cable adjustment bolt - BOLT, CABLE ADJ.  53192422000
Petcock filter - SCR SET, FUEL STRN 16952425005  ***this is from a 1980 CB650 tank, I swapped tanks
Battery terminal nuts &  bolts - I'm not sure of the size, or what material is acceptable.

Also, does the fuel line typically run right from the petcock to the brass fuel joint between carbs 3 and 3?  I don't have the vacuum-assisted petcock.

Thanks all!

Offline Kevin D

  • Old Timer
  • ******
  • Posts: 2,867
  • SE Michigan
Re: Getting back on the road - small parts question
« Reply #1 on: September 24, 2018, 05:40:32 PM »
Cable adjuster here at CycleReCycle in Indianapolis under general accessories $2.95

https://newmotorcycleparts.net/accessories/general_accessories.html

Screen set here at CMSNL, that's the Netherlands, only 2 left, € 30 sorry.

https://www.cmsnl.com/products/scr-setfuel-strn_16952425005/#.W6l7utEpChA

Battery bolts come with a new battery, maybe a battery shop will have some old ones, or new ones.
71 CB750 K1
104,000 miles
Original Owner
———past———
70 SL100/125/150
70 Candy BlueGreen CB 750 K0
————————————————-
Former Honda parts kid/counter kid/do all
—————————————————————-
Whether you think you can or think you can’t, you’re right
Genius is 99% perspiration, 1% inspiration

Offline irish44395

  • Hot Shot
  • ***
  • Posts: 275
Re: Getting back on the road - small parts question
« Reply #2 on: September 24, 2018, 05:58:35 PM »
you can get away with out the auto fuel valve. I don't
use the one on mine just put the fuel line straight to the carbs . I also have a fuel filter in that line ,the one in the fuel valve has rotted away . hope this helps
Pete