Author Topic: 1975 Honda CB400 Four Project - Rookie  (Read 317476 times)

0 Members and 1 Guest are viewing this topic.

Offline kslrr

  • There is always a Blaster when there is a
  • Master
  • *****
  • Posts: 1,542
  • Raising her up right!
Re: 1975 Honda CB400 Four Project - Rookie
« Reply #550 on: June 08, 2018, 07:46:02 PM »
Here's my setup on my 350 with a pretty much straight thru 4 into 1: idle jet 35, main jet 75, needle clip on the bottom slot which gives a richer mixture at wide open throttle.  Forgot to mention, no air box.  I was using pod filters but am now working on a ram-air system which will most likely change things.
« Last Edit: June 08, 2018, 07:48:01 PM by kslrr »
Now  1972 CB350FX (experimental v2.0)
        1981 CB650c Custom with '79 engine (wifes)
        1981 CB650 engine
        2004 HD XL883C Custom
        1977 Yamaha XS750D (in progress)
Then 1972 CL175
        1964 Yamaha YGS-1T
No ride is a Bad ride

Offline RickB

  • Hot Shot
  • ***
  • Posts: 571
    • Pop Magazine
Re: 1975 Honda CB400 Four Project - Rookie
« Reply #551 on: June 08, 2018, 09:35:02 PM »
kslrr,

Thanks for the insight, but I would think the no airbox changes things drastically no? Your needle clip positioning is intriguing though. Tempted to try this.

Offline jakec

  • Master
  • *****
  • Posts: 2,075
Re: 1975 Honda CB400 Four Project - Rookie
« Reply #552 on: October 01, 2018, 09:35:34 AM »
Have you fitted up that fairing?
1970 CB750 K0
1977 CB750 Chop
1997 XR650L